This review paper explores at a high conceptual level cartography’s potential role in the emerging field of indoor mapping. It introduces an interdisciplinary literature on foundational theories, approaches, and applications of indoor maps driven by advancements in indoor positioning systems and an accompanying desire to exploit those capabilities through maps. The review concludes that cartography, with its rich heritage in the mapping arts and sciences, can make important contributions as technologies, needs, and theories converge to make sophisticated indoor mapping a reality. This paper includes discussions of issues, challenges, and prospects for indoor mapping along with examples of possible new applications.
15 February 2020 in International Journal of Remote Sensing
The ability to accurately estimate the amount of stockpile material for construction projects can have a substantial impact on project budgets and schedules as well as public safety. Recent proliferation of small Unmanned Aircraft System (sUAS) platforms has made it possible to estimate these stockpiles using inexpensive aerial imagery and photogrammetry at a fraction of the cost and time compared to traditional methods. This study examines the quality of height and volume estimates from sUAS photogrammetry processed through Agisoft Metashape, Bentley ContextCapture, and PixElement, and compared with Global Navigation Satellite System (GNSS) based surveying and Terrestrial Laser Scanning (TLS) measurements. Measurements made on three co-located stockpiles occupying in total 345 m2 and a volume of 487.11 m3 showed that all three software produced results within 3% of TLS measured height and 2% of TLS volume overall, with greater local variation. Moreover, photogrammetry provided complete coverage while the TLS data had voids due to scanner obstructions. Considering that results could be further improved with refinements in technique, this study joins others in demonstrating that sUAS photogrammetry provides a viable alternative to conventional methods for estimating stockpiles.
Interest in small unmanned aircraft systems (sUAS) for topographic mapping has significantly grown in recent years, driven in part by technological advancements that have made it possible to survey small- to medium-sized areas quickly and at low cost using sUAS aerial photography and digital photogrammetry. Although this approach can produce dense point clouds of topographic measurements, they have not been tested extensively to provide insights on accuracy levels for topographic mapping. This case study examines the accuracy of a sUAS-derived point cloud of a parking lot located at the Citizens Bank Arena (CBA) in Ontario, California, by comparing it to ground control points (GCPs) measured using global navigation satellite system (GNSS) data corrected with real-time kinematic (RTK) and to data from a terrestrial laser scanning (TLS) survey. We intentionally chose a flat surface due to the prevalence of flat scenes in sUAS mapping and the challenges they pose for accurately deriving vertical measurements. When the GNSS-RTK survey was compared to the sUAS point cloud, the residuals were found to be on average 18 mm and −20 mm for the horizontal and vertical components. Furthermore, when the sUAS point cloud was compared to the TLS point cloud, the average difference observed in the vertical component was 2 mm with a standard deviation of 31 mm. These results indicate that sUAS imagery can produce point clouds comparable to traditional topographic mapping methods and support other studies showing that sUAS photogrammetry provides a cost-effective, safe, efficient, and accurate solution for topographic mapping.
One major challenge in creating indoor maps involves defining their levels of detail or LODs. While a consensus has emerged that indoor maps have at least two types of LODs, semantic and geometric, questions remain regarding their nature, their partitioning, and their relationships with each other as well as with other forms of LOD. Since semantics deals with the meanings of things, semantic LODs (SLODs) deal with the definition, classification, and partitioning of mapped entities. Unlike geometric LODs that are amenable to automation, SLODs have a more qualitative nature that defies automation and requires the careful application of human judgment. This paper proposes a framework for organizing semantic LODs by first classifying them based on the tangibility of mapped entities (i.e., intangible open spaces versus tangible physical features comprised of building structures and equipment and furnishings) and then partitioning each class based on the idea of permanence, defined here as an entity’s tendency to remain stationary over time. A cartographic process for integrating SLODs with geometric and appearance LODs is also introduced along with several examples.
Throughout the past few decades, advancements in global navigation satellite systems (GNSS), such as the Global Positioning System (GPS), have resulted in real-time planimetric accuracy at the centimetre level, whether achieved using Real-Time Kinematic (RTK) or Real-Time Network (RTN) approaches. This study examines and characterizes the performance of RTK and RTN solutions at three test sites in Los Angeles County, California, in the United States of America. The solutions were characterized to examine the dispersion of vertical measurements in the context of different environments. The results from this study suggest that both methods have advantages and drawbacks; in particular, the data showed that the distribution and density of the network stations, cellular network coverage and environmental dynamics have significant impacts on RTN vertical precision, where the vertical precision for the RTN measurements were observed to be 2–4 times lower in comparison to the RTK measurements.