Powdered adsorbent prepared from Albizia lebbeck pods as agricultural waste has been used for the adsorption of Pb(II), Cd(II), Zn(II) and Cu(II) ions from aqueous solutions. The powdered adsorbent was characterized by X-ray diffraction, Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller. Effects of various parameters like contact time, solution pH, initial concentration dosage and temperature were investigated on a batch adsorption system. Equilibrium and kinetic experiments were carried out at the optimum pH of 6, 8 and 10 at 29 °C using particle size of 250 μm for Cd(II), Pb(II), Zn(II) and Cu(II) ions. Changes in free energy, enthalpy and entropy were also evaluated. The adsorption data fitted well with the Langmuir isotherm model with correlation coefficient (\(R^{2} > 0.94\)), whereas the adsorption kinetics followed the pseudo-second-order kinetics. The thermodynamic parameters proved that adsorption of metal ions is endothermic and non-spontaneous at low temperatures, while spontaneity occurred at higher temperatures. This study shows that powdered Albizia lebbeck pods prove to be a promising inexpensive adsorbent for metal ion removal from aqueous solutions.
Increase in industrial and anthropogenic activities leads to a decline in water quality. This necessitates the need for the removal of contaminants from industrial and domestic wastewater. Clay minerals are naturally abundant and non-toxic materials that found to be useful for remediation of emerging contaminants from wastewater. This review paper presents an insight into clay, the simplest material (in solgel techniques) for the synthesis of TiO2and ZnO, mechanisms of their reactions, analytical techniques used for characterizations, and their nanocomposites for wastewater treatment. Nanomaterials, such as nanoclay, titanium, and zinc oxide, have offered the opportunities of sequestering variety of pollutants in wastewater. TiO2and ZnO anchored on clay have been found to be good promising sequesters and have been explored for wastewater remediation via nanotechnology. This water treatment method includes adsorption/absorption, photocatalysis, and microbial disinfection. These nanocomposites provide more active surface sites and reduce the agglomeration of the nanoparticles, but leaching has been their shortcomings. To overcome this, the filtration technique may become significant for the removal and avoidance of fouling of wastewater. This can be achieved through the fabrication of nano-based filters using the nanocomposites.
In the present work, kaolin sample from Gbako Local Government, Niger State, Nigeria was used as an adsorbent for the removal chloride, COD, BOD, sulphate, chromium, cadmium, zinc and the reduction of total alkalinity in tannery wastewater. The kaolin sample was pretreated to enhance its adsorption capacity and then characterized using X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), High Resolution Electron Microscopy (HRSEM), High Resolution Transmission Electron Microscopy (HRTEM), Energy Dispersive Spectroscopy (EDX), Selective Area Electron Diffraction (SAED) and Brunauer Emmett-Teller (BET). The specific surface area, pore volume and pore diameter of the kaolin were 17 m2/g, 0.018 cm3/g and 3.587 nm, respectively. The adsorption methods of the parameters onto the kaolin were investigated as functions of contact time, adsorbent dosage and temperature. Equilibrium isotherms for the adsorption parameters were carried out experimentally and the adsorption data correlated very well with Jovanovic and Redlich-Peterson models. Furthermore, the adsorption kinetics followed the Avrami model. From the results of the study it was established that kaolin from Gbako, Nigeria can serve as an economic, safe and effective natural adsorbent for the pollutants removal from tannery wastewater.
In the present study, comparative studies of kaolin and kaolin/ZnO nanocomposites for the adsorption of Cr(VI), Fe(III), COD, BOD, and chloride from tannery wastewater were investigated. ZnO nanoparticles and kaolin/ZnO nanocomposites were prepared by sol–gel followed by wet-impregnation methods. The prepared adsorbents were characterized using different analytical tools such as X-ray diffraction, Fourier transforms infrared, high-resolution transmission electron microscopy, energy dispersive spectroscopy, selective area electron diffraction and Brunauer Emmett–Teller (BET) and X-ray Photoelectron Spectroscopy (XPS). The HRSEM/EDS/XPS analysis confirmed successful immobilization of clay structural network on the lattice layers of zincite hexagonal structure of ZnO nanoparticles. BET measurement showed an increase in the surface area of kaolin/ZnO nanocomposites (31.8 m2/g) when compared to kaolin (17 m2/g). Batch adsorption studies were carried out by varying the parameters such as contact time, adsorbent dosage and temperature. The maximum removal of Cr(VI) (100%), Fe(III) (98%), COD (95%), BOD (94%) and Chloride (78%) was obtained at 15 min by kaolin/ZnO composites. While 78% Cr(VI), 91% Fe(III), 91% COD, 89% BOD and 73% Chloride were removed by kaolin under the same conditions. The kaolin/ZnO nanocomposites exhibited better adsorption performance than kaolin due to higher surface area of the former than the latter. It was found that the Jovanovic isotherm model fitted the adsorption experimental data most with the highest correlation (R2 > 0.99) for both nanoadsorbents and indicate the occurrence of adsorption on monolayer and heterogeneous surfaces. The mechanism for the adsorption of metal ions in tannery wastewater onto the nano-adsorbents was examined using Weber Morris intra-particle diffusion model and Boyd plot which showed that the adsorption process was both intra-particle and film diffusion controlled. The thermodynamic parameters such as enthalpy change showed that that adsorption of metal ions and other parameters was feasible, spontaneous and endothermic. The ZnO/clay nanocomposites exhibited excellent recyclable and re-useable properties even after six repeated applications and can, therefore, be applied in wastewater treatment for removal of heavy metals and other physicochemical parameters.
22 March 2021 in Environmental Monitoring and Assessment