The mooring systems give stability to the floating platforms against environmental conditions, stabilizing the platform with mooring lines attached to the seabed. The mooring systems are among the main components that guarantee the safety of the staff and the various operations carried out on the platforms. The current approaches used to monitor mooring lines are inefficient as line tension sensors are expensive to install, maintain, and have durability problems. This article presents the development of two neural network-based machine learning systems: a Multilayer Perceptron (MLP) and a Long Short-Term Memory (LSTM). They are able to detect mooring line failure in near real-time based on the comparison between measured and predicted motion. The implemented systems were trained and evaluated with simulated motion data generated using real environmental conditions measured in the Campos Basin, in Rio de Janeiro, Brazil. The results showed the MLP and LSTM models were able to detect a failure in the mooring lines, with increasing difference between the predicted and the measured motions when there is a line breakage. A comparison between the two machine learning models revealed the LSTM model performed better at predicting the motions of the platform.
The current design process of mooring systems for Floating Production, Storage, and Offloading units (FPSOs) depends on the availability of the platform’s mathematical model and the accuracy of dynamic simulations. These simulations then provide the FPSO’s time series motion which is evaluated according to design constraints. This process can be time-consuming and present inaccurate results due to the mathematical model’s limitations and the overall complexity of the vessel’s dynamics. We propose a Neural Simulator, called NeuroSim, a set of data-based surrogate models with environmental data as input, each model specialized in predicting different motion statistics relevant to mooring system design: Maximum Roll, Platform Offset, and Fairlead Displacements. The surrogate models are trained by current, wind, and wave data given in 3 hours periods at a Brazilian Offshore Basin from 2003 to 2010, and the associated dynamic response of a spread-moored FPSO is obtained through time-domain simulations using the Dynasim software. Hyperparameter Optimization techniques are performed to obtain optimal Artificial Neural Network (ANN) models specialized in different platform drafts. Finally, the proposed models are shown to correctly capture platform dynamics, providing good results when compared to motion statistics obtained from Dynasim. We conclude that an ANN surrogate model can be trained directly on actual measured metocean conditions and corresponding FPSO motion statistics to provide increased accuracy and reduced computational time over traditional methods based on dynamic simulation. Moreover, the proposed architecture can be integrated into an automated learning framework: The data-based surrogate models can be continuously fine-tuned and updated with newly measured data, improving accuracy over time.
A Digital Twin is a virtual representation of a real-world object or process, leveraging powerful computational architectures available both on-premises and in the cloud. By harnessing the increased availability of real-time data and advancements in machine learning predictive algorithms, Digital Twins find applications across various domains such as Earth Science, Oil and Gas, and Healthcare. However, realizing their full potential demands addressing the technical complexities of integrating numerous components during development and operational phases of the system. This paper describes an ongoing effort to build a comprehensive platform that supports the entire lifecycle of a Digital Twin, from continuous specialized model training to online prediction and event detection, by capturing and processing live data. This approach enables timely updates to the virtual representations of physical elements within the twin application as they change. We detail each component of the Digital Twin solution and demonstrate its applicability through a real use case implemented in the Oil and Gas industry. Specifically, we focus on monitoring the motion of oil platforms to ensure the integrity of the mooring systems and respond to adverse conditions through an alert system powered by our platform.