Mark Turner

Prof. Mark Turner


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
Kiran SiddappajiKiran Siddappaji
Kiran Siddappaji
MTMark Turner
Mark Turner
Designing blades for efficient energy transfer by turning the flow and angular momentum change is both an art and iterative multidisciplinary engineering process. A robust parametric design tool with few inputs to create 3D blades for turbomachinery and rotating or non-rotating energy converters is described in this paper. The parameters include axial–radial coordinates of the leading/trailing edges, construction lines (streamlines), metal angles, thickness-to-chord ratio, standard, and user-defined airfoil type among others. Using these, 2D airfoils are created, conformally mapped to 3D stream surfaces, stacked radially with multiple options, and they are transformed to a 3D Cartesian coordinate system. Smooth changes in blade curvature are essential to ensure a smooth pressure distribution and attached flow. B-splines are used to control meanline curvature, thickness, leading edge shape, sweep-lean, and other parameters chordwise and spanwise, making the design iteration quick and easy. C2 curve continuity is achieved through parametric segments of cubic and quartic B-splines and is better than G2. New geometries using an efficient parametric scheme and minimal CAD interaction create watertight solid bodies and optional fluid domains. Several examples of ducted axial and radial turbomachinery with special airfoil shapes or otherwise, unducted rotors including propellers and wind and hydrokinetic turbines are presented to demonstrate versatility and robustness of the tool and can be easily tied to any automation chain and optimizer.

28 April 2023 in Processes
Verified
Journal Article
Open access
PDF file
SGSaugat Ghimire
Saugat Ghimire
MTMark Turner
Mark Turner
This paper describes the findings of detailed simulations performed to investigate the impact of seal teeth cavity leakage flow on the aerodynamic and thermal performance of a three-stage supercritical CO2 axial compressor. The study compares a shrouded stator configuration (with cavities) to a cantilevered stator configuration (without cavities) to highlight their differences. High-fidelity computational fluid dynamics simulations were performed using non-linear harmonic (NLH) and mixing plane assumptions, considering various possible rotor/stator interface configurations for mixing plane calculations. The key performance parameters for each case were compared, and the best-performing configuration selected for further analysis. The individual stage performance parameters are also examined and compared between the cantilevered and shrouded configurations. It was observed that in the shrouded case, the leakage flow enters the cavity downstream of the stator trailing edge and gets entrained into the primary flow upstream of the stator, leading to boundary layer changes at the hub and degradation of stator and downstream rotor performance. Vortical flow structures were also observed in the stator wells, which tended to change the flow angles around the region, thereby affecting mixing and velocity distribution, resulting in a slight deterioration of compressor performance. Additionally, the study examines windage heating due to shear work from rotating walls, including the seal teeth surface. The amount of shear work done on the leakage flow and the corresponding rise in fluid temperature were quantified, tabulated, and further compared with a simple analytical model, showing good agreement between them and, hence, validating the numerical approach used.

13 September 2022 in Processes
Verified
Journal Article
Open access
PDF file
Kiran SiddappajiKiran Siddappaji
Kiran Siddappaji
MTMark Turner
Mark Turner
The MDAO framework has become an essential part of almost all fields, apart from mechanical, transportation, and aerospace industries, for efficient energy conversion or otherwise. It enables rapid iterative interaction among several engineering disciplines at various fidelities using automation tools for design improvement. An advanced framework from low to high fidelity is developed for ducted and unducted turbomachinery blade designs. The parametric blade geometry tool is a key feature which converts low-fidelity results into 3D blade shapes and can readily be used in high-fidelity multidisciplinary simulations as part of an optimization cycle. The geometry generator and physics solvers are connected to DAKOTA, an open-source optimizer with parallel computation capability. The entire cycle is automated and new design iterations are generated with input parameter variations controlled by DAKOTA. Single- and multi-objective genetic algorithm and gradient method-based optimization cases are demonstrated for various applications. B-splines are used to define smooth perturbation of parametric variables chordwise and spanwise of the blade. The ability to create parametric 3D blade shapes quickly from low-fidelity analyses with advanced control is demonstrated to be unique and enables a rapid 3D design cycle. Non-intuitive designs are feasible in this framework and designers can really benefit from parametric geometry manipulation. Optimization at each fidelity is realized through automation. As part of the multidisciplinary analysis, 3D structural analysis is also performed using the unidirectional fluid–structure interaction for a few cases with imported pressure loads from the 3D RANS solution. Examples of axial turbofans, compressor rotors, turbines, radial compressors, propellers, wind and hydrokinetic turbines are demonstrated to prove generality.

26 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
Kiran SiddappajiKiran Siddappaji
Kiran Siddappaji
MTMark Turner
Mark Turner
Several physics-based enhancements are embedded in a low-fidelity general unducted rotor design analysis tool developed, py_BEM, including the local Reynolds number effect, rotational corrections to airfoil polar, stall delay model, high induction factor correction, polar at large angle of attack, exergetic efficiency calculation and momentum-based loss. A wind turbine rotor is analyzed in high fidelity designed from py_BEM using a 3D blade generator. It is a design derived from the NREL Phase VI rotor. Three design variations are analyzed using steady 3D CFD solutions to demonstrate the effect of geometry on aerodynamics. S809 and NACA 2420 airfoil properties are used for calculating the aerodynamic loading. Momentum, vorticity and energy transport are explained in depth and connected to entropy production as a measure of performance loss. KE dissipation downstream of the rotor is shown to be a significant contributor of entropy rise. Wake analysis demonstrates mixing with the free stream flow, which begins after 3 diameters downstream of the rotor and extends to about 25 diameters until the decay is very small. Vorticity dynamics is investigated using a boundary vorticity flux technique to demonstrate the relationship between streamwise vorticity and lift generated in boundary layers. Drag components are accounted as well. It is demonstrated using rothalpy that shaft power is not only torque multiplied by rotational velocity but a viscous power loss term must also be included. A multifidelity analysis of wind turbine aerodynamics is demonstrated by capturing flow physics at several levels.

29 January 2025 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
THTimothy J. Held
Timothy J. Held
JMJason Miller
Jason Miller
KSKyle Sedlacko
Kyle Sedlacko
JCJoshua D. Cameron
Joshua D. Cameron
SMScott C. Morris
Scott C. Morris
MTMark Turner
Mark Turner
Pumped thermal energy storage (PTES) offers a cost-effective means to store electrical energy for long duration by utilizing a heat pump cycle to transfer thermal energy from a low temperature reservoir (LTR) to a high temperature reservoir (HTR). The heat pump compressor, which represents a significant driver to the cost, performance and operating characteristics of the PTES system. During charging (>100 MW), traditional compressor scaling charts indicate that the operating conditions needed would be best served by a multistage axial compressor. The conceptual design of a large-scale CO2 axial compressor was completed, including mean-line estimates of the compressor performance at full power conditions. At steady state, full power operation, the isentropic efficiency and mechanical efficiency of the compressor have significant impact on the cycle design and round trip efficiency of the PTES system. The results of the conceptual design were used to refine the PTES cycle design and updated operating conditions provided for further aero design optimization. An important characteristic of the PTES system is its ability to charge at variable rate, which provides significant challenges on compressor operability, especially for a compressor that will be coupled to a fixed-speed synchronous motor. Cycle studies of variable charging rate processes have been conducted, and the impact of compressor operating map characteristics explored. Based on initial modeling studies, single compressor operation can be achieved down to at least 50% of rated power, with further reductions possible depending on the characteristics of the compressor map speedlines.

20 May 2022 in Fluids
Verified
Journal Article
Open access
PDF file
Kiran SiddappajiKiran Siddappaji
Kiran Siddappaji
MTMark Turner
Mark Turner
Propellers for electric aviation are used in solo- and multirotor applications. Multifidelity analysis with reduced cycle time is crucial to explore several designs for energy minimization and range maximization. A low-fidelity design tool, py_BEM, is developed for design and analysis of a reverse-engineered solo 2-bladed propeller using blade-element momentum theory with physics enhancements including local Reynolds number effect, boundary-layer rotation, airfoil polar at large AoAs and stall delay. Spanwise properties from py_BEM are converted into 3D blade geometry using T-Blade3. S809 and NACA airfoil polar are utilized, obtained by XFOIL. Lift, drag, performance losses, wake analysis, comparison of 3D steady CFD with low fidelity tool, kinetic energy dissipation, entropy and exergy through irreversibility are analyzed. Spanwise thrust and torque comparison between low and high fidelity reveals the effect of blade rotation on the polar. Vorticity dynamics and boundary-vorticity flux methods describe the onset of flow separation and entropy rise. Various components of drag and loss are accounted. The entropy rise in the boundary layer and downstream propagation and mixing out with freestream are demonstrated qualitatively. Irreversibility is accounted downstream of the rotor using the second-law approach to understand the quality of available energy. The performance metrics are within 5% error for both fidelities.