Agriculture, or farming, is the science of cultivating the soil, growing crops, and raising livestock. Ever since the days of the first plow from sticks over ten thousand years ago, agriculture has always depended on technology. As technology and science improved, so did the scale at which farming was possible. With the popularity and growth of the Internet of Things (IoT) in recent years, there are even more avenues for technology to make agriculture more efficient and help farmers in every nation. In this paper, we designed a smart IoT-enabled drip irrigation system using ESP32 to automate the irrigation process, and we tested it. The ESP32 communicates with the Blynk app, which is used to collect irrigation data, manually water the plants, switch off the automatic watering function, and plot graphs based on the readings of the sensors. We connected the ESP32 to a soil moisture sensor, temperature sensor, air humidity sensor, and water flow sensor. The ESP32 regularly checks if the soil is dry. If the soil is dry and the soil temperature is appropriate for watering, the ESP32 opens a solenoid valve and waters the plants. The amount of time to run the drip irrigation system is determined based on the flow rate measured by the water flow sensor. The ESP32 reads the humidity sensor values and notifies the user when the humidity is too high or too low. The user can switch off the automatic watering system according to the humidity value. In both primary and field tests, we found that the system ran well and was able to grow green onions.
Plastic waste is increasing worldwide, contributing significantly to pollution and global warming. Our department uses at least 50 plastic water bottles daily; these bottles can be reused to manufacture other products. Recycling plastic waste produces various products, including garden sets for kids, bricks, roof tiles, key holders, and flowerpots. Through this project, we contribute to the fight against pollution caused by plastic waste by developing an easy-to-use plastic processing system. We create these valuable products using plastic collected from landfills. We present an open-source system that can be easily built by a technical team to create an ecosystem. We use the project as a mobile educational model to demonstrate the recycling mechanism and to foster a community recycling culture. The following procedures are included in this study. High-density polyethylene bottle caps are washed and dried before shredding in a shredder to produce flakes. Plastic flakes are fed into an extruder, which heats and transforms them into a homogeneous mass. This molten plastic is molded into the shape of a flowerpot using a die. Pots are great products to obtain from discarded plastic caps due to their strength. Following the fabrication of the entire system, numerous tests are performed to improve the design and obtain the desired specifications, resulting in appealing end products. In our facilities, flowerpots are made from consumer bottle caps and used to grow aloe.
Emergency exit lights in public buildings are necessary for safety and evacuation. International safety standards require such lighting in many public places, like airports, schools, malls, hospitals, and other spaces, to prevent human casualties in emergencies. Emergency exit lights have become an essential part of casualty reduction projects. They can pose several application problems, including fire safety concerns. The issue of providing a safe way and operating emergency exit lights along one side of a long path arises during an emergency. Many studies in this field consider the case in which emergency exit lights’ battery or main power fails. Power failures in dangerous situations such as fires or terrorist attacks make it difficult for people to escape. The lighting in open areas and stairwells during an emergency should be at least 2 lux. This work proposes an innovative technique for wirelessly powering emergency lights using microwave energy. Specifically, the study designed and fabricated a new wirelessly powered emergency lighting prototype. This prototype’s wireless power transfer (WPT) base comprises an RF/DC converter circuit and an RF microwave transmitter station. The device can harvest RF microwave energy to energize the emergency light. This research aimed to develop a compact device that captures maximum RF strength to power emergency lights. As a prototype, the proposed device was designed to provide sufficient microwave energy to power an emergency light at 3 W over a 62 m distance.
Over the past few decades, billions of adult breeding birds have been lost worldwide. The primary factors for this population loss are habitat loss and global warming. To aid the efforts for bird conservation, we have designed a simple birdhouse that can be 3D printed rapidly using a six-axis arm robot. We transformed a six-axis palletizing robotic arm into a ceramic 3D printer with the help of an extruder, stepper motor, and a custom Printed Circuit Board (PCB) consisting of an ESP32 and a motor driver. The ceramic clay is stored in a pneumatic pressure tank. An air compressor pump transports the clay from the tank to the extruder. We conducted various experiments at 8–10 bars of air pressure with different water-to-clay ratios. We found that the optimum air pressure, water-to-clay ratio, and nozzle sizes are 10 bars, 0.084, and 5 mm, respectively. After determining the appropriate printing parameters, we designed the birdhouse in the Mastercam software and generated the G-code. The G-code is loaded onto the robot controller, and the birdhouse is printed in parts. We dried the birdhouse for 24 h and then baked it in a kiln for 24 h at 1000 degrees Celsius. We then compared the ceramic birdhouse to a wooden birdhouse. The ceramic birdhouse maintains internal temperatures of 38 degrees Celsius or lower despite external temperatures reaching 43 degrees Celsius, which is on par if not better than the wooden birdhouse. This temperature will be beneficial for nesting, breeding, and egg development.