The research aims to show the ability to convert the Fused Deposition Modeling 3D printer to be compatible with the clay mixture after modifying the structure, setting up Cura software, and changing the print head technology. This solution provides research teams and scientists with opportunities in several ways (manufacture patch antenna substrate, dielectric automobile sensors, and ceramic dielectric aerospace technology). Additive manufacturing allows the production of many intricate shapes with ceramics, which is difficult with a traditional method. This paper used WASP ceramic slurry as raw material for Liquid Deposition Modeling (LDM) of various samples using the Archimedes screw and air pressure dispensing technique (a two-step process). LDM is a low-cost and straightforward technology appropriate for the clay prototype scale. Different clay-built shapes have been produced with water-to-clay ratios ranging from 0.57 to 0.69. The effect of the nozzle size in printing experiment tests is demonstrated. The experiment tested the print head (extruder) mechanism, the properties of the materials suitable for the putty, and how the wet slurry material is extruded from the nozzle. The optimum air pressure and slicing configuration for efficient printing are provided. Samples were stress-tested after they were dried for 24 h at average laboratory temperature and then exposed to 1000 $$^\circ $$ for 1 h.
According to Robert McSweeney, in light of a new study: “Conditions in the GCC could become so hot and humid in the coming years that staying outside for more than six hours will become difficult”. He is a climate analyst at CARBON BRIEF, a nonprofit temperature and climate analysis group. He also states that changes there can help give us an idea of what the rest of the world can expect if we do not reduce the emissions that pollute homes and factories. Because of the high temperatures in GCC countries, the effect of heat stress is very high there, which discourages shoppers and pedestrians from shopping in the open area due to the physical exertion and high risks faced by people and workers. Heat stress peaks in most Arab Gulf countries from 11:00 a.m. to 4:00 p.m. during the summer season. Heat stress is increasingly an obstacle to economic efficiency in these countries. This work designs and develops a robot that tracks shoppers and provides a cool stream of air directly around them during shopping in open areas to reduce the effect of heat stress. The robot enables us to cool the temperature around customers in the market to increase comfort. In this project, a robot was designed and manufactured to track a specific person and cool the air around him through a cool stream of air generated by the air conditioner installed inside the robot. We used a Raspberry Pi camera sensor to detect the target person and interact with a single-board computer (Raspberry Pi 3) to accomplish this design and the prototype. Raspberry Pi controls the air-conditioning robot to follow the movement of the target person. We used image processing to discover the target shopper, the control system, and then guide the bot. In the meantime, the robot must also bypass any potential obstacles that could prevent its movement and cause a collision. We made a highly efficient design that can synchronize between the software algorithm and the mechanical platform of the robot. This work is merely the combination of a cool stream of air and a robot that follows a human.
Emergency exit lights in public buildings are necessary for safety and evacuation. International safety standards require such lighting in many public places, like airports, schools, malls, hospitals, and other spaces, to prevent human casualties in emergencies. Emergency exit lights have become an essential part of casualty reduction projects. They can pose several application problems, including fire safety concerns. The issue of providing a safe way and operating emergency exit lights along one side of a long path arises during an emergency. Many studies in this field consider the case in which emergency exit lights’ battery or main power fails. Power failures in dangerous situations such as fires or terrorist attacks make it difficult for people to escape. The lighting in open areas and stairwells during an emergency should be at least 2 lux. This work proposes an innovative technique for wirelessly powering emergency lights using microwave energy. Specifically, the study designed and fabricated a new wirelessly powered emergency lighting prototype. This prototype’s wireless power transfer (WPT) base comprises an RF/DC converter circuit and an RF microwave transmitter station. The device can harvest RF microwave energy to energize the emergency light. This research aimed to develop a compact device that captures maximum RF strength to power emergency lights. As a prototype, the proposed device was designed to provide sufficient microwave energy to power an emergency light at 3 W over a 62 m distance.
Plastic waste is increasing worldwide, contributing significantly to pollution and global warming. Our department uses at least 50 plastic water bottles daily; these bottles can be reused to manufacture other products. Recycling plastic waste produces various products, including garden sets for kids, bricks, roof tiles, key holders, and flowerpots. Through this project, we contribute to the fight against pollution caused by plastic waste by developing an easy-to-use plastic processing system. We create these valuable products using plastic collected from landfills. We present an open-source system that can be easily built by a technical team to create an ecosystem. We use the project as a mobile educational model to demonstrate the recycling mechanism and to foster a community recycling culture. The following procedures are included in this study. High-density polyethylene bottle caps are washed and dried before shredding in a shredder to produce flakes. Plastic flakes are fed into an extruder, which heats and transforms them into a homogeneous mass. This molten plastic is molded into the shape of a flowerpot using a die. Pots are great products to obtain from discarded plastic caps due to their strength. Following the fabrication of the entire system, numerous tests are performed to improve the design and obtain the desired specifications, resulting in appealing end products. In our facilities, flowerpots are made from consumer bottle caps and used to grow aloe.