One of the challenges faced by Brazilian distribution utilities to enable the connection and operation of microgrids (MGs) is the absence of a solid set of technical standards in the country. An alternative has been to use and adapt existing standards applied to micro- and mini-distributed generation. In this context, this paper presents an analysis of the development status of norms, standards, and general requirements for the connection and operation of microgrids, as well as a proposal for the regulation and structuring of technical and operational requirements related to the implementation of microgrid projects. Some critical points highlighted in the paper include: the modes of operation, the minimum requirements for the different modes of operation, interoperability of systems, a conceptual model with attribution of responsible actors for the decentralized management of microgrids adapted to the institutional standards of the Brazilian sectorial model, a proposal for a standard connection structure considering the point of connection (PoC) implanted using multifunctional relay and recloser, procedures for technical feasibility assessment (operational studies) of MGs connection, and, finally, a discussion of operational issues of storage systems in a microgrid environment.

This work presents a multi-parameter optical fiber monitoring solution applied to an underground power distribution network. The monitoring system demonstrated herein uses Fiber Bragg Grating (FBG) sensors to measure multiple parameters, such as the distributed temperature of the power cable, external temperature and current of the transformers, liquid level, and intrusion in the underground manholes. To monitor partial discharges of cable connections, we used sensors that detect radio frequency signals. The system was characterized in the laboratory and tested in underground distribution networks. We present here the technical details of the laboratory characterization, system installation, and the results of 6 months of network monitoring. The data obtained for temperature sensors in the field tests show a thermal behavior depending on the day/night cycle and the season. The temperature levels measured on the conductors indicated that in high-temperature periods, the maximum current specified for the conductor must be reduced, according to the applied Brazilian standards. The other sensors detected other important events in the distribution network. All the sensors demonstrated their functionality and robustness in the distribution network, and the monitored data will allow the electric power system to have a safe operation, with optimized capacity and operating within tolerated electrical and thermal limits.

Microgrids have emerged as a popular solution for electric energy distribution due to their reliability, sustainability, and growing accessibility. However, their implementation can be challenging, particularly due to regulatory and market issues. Building smaller-scale microgrids, also known as nanogrids, can present additional challenges, such as high investment costs that need to be justified by local demands. To address these challenges, this work proposes an economic feasibility assessment model that is applied to a real nanogrid under construction in the Brazilian electrical system, with electric vehicle charging stations as its main load. The model, which takes into account uncertainties, evaluates the economic viability of constructing a nanogrid using economic indicators estimated by the Monte Carlo simulation method, with the system operation represented by the OpenDSS software. The model also considers aspects of energy transactions within the net-metering paradigm, with energy compensation between the nanogrid and the main distribution network, and investigates how incentives can impact the viability of these microgrids.