Facile fabrication and high ambient stability are strongly desired for the practical application of temperautre sensor in real-time wearable healthcare. Herein, a fully printed flexible temperature sensor based on cross-linked poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was developed. By introducing the crosslinker of (3-glycidyloxypropyl)trimethoxysilane (GOPS) and the fluorinated polymer passivation (CYTOP), significant enhancements in humidity stability and temperature sensitivity of PEDOT:PSS based film were achieved. The prepared sensor exhibited excellent stability in environmental humidity ranged from 30% RH to 80% RH, and high sensitivity of −0.77% °C⁻¹for temperature sensing between 25 °C and 50 °C. Moreover, a wireless temperature sensing platform was obtained by integrating the printed sensor to a printed flexible hybrid circuit, which performed a stable real-time healthcare monitoring.

We present a high-performance flexible bending strain sensor for directional motion detection of human hands and soft robotic grippers. The sensor was fabricated using a printable porous conductive composite composed of polydimethylsiloxane (PDMS) and carbon black (CB). The utilization of a deep eutectic solvent (DES) in the ink formulation induced a phase segregation between the CB and PDMS and led to a porous structure inside the printed films after being vapored. This simple and spontaneously formed conductive architecture provided superior directional bend-sensing characteristics compared to conventional random composites. The resulting flexible bending sensors displayed high bidirectional sensitivity (gauge factor of 45.6 under compressive bending and 35.2 under tensile bending), negligible hysteresis, good linearity (>0.99), and excellent bending durability (over 10,000 cycles). The multifunctional applications of these sensors, including human motion detection, object-shape monitoring, and robotic perceptions, are demonstrated as a proof-of-concept.