A novel biosensor for immunoglobulin G (IgG) detection based on an extended-gate type organic field effect transistor (OFET) has been developed that possesses an anti-IgG antibody on its extended-gate electrode and can be operated below 3 V. The titration results from the target IgG in the presence of a bovine serum albumin interferent, clearly exhibiting a negative shift in the OFET transfer curve with increasing IgG concentration. This is presumed to be due an interaction between target IgG and the immobilized anti-IgG antibody on the extended-gate electrode. As a result, a linear range from 0 to 10 µg/mL was achieved with a relatively low detection limit of 0.62 µg/mL (=4 nM). We believe that these results open up opportunities for applying extended-gate-type OFETs to immunosensing.

We present a high-performance flexible bending strain sensor for directional motion detection of human hands and soft robotic grippers. The sensor was fabricated using a printable porous conductive composite composed of polydimethylsiloxane (PDMS) and carbon black (CB). The utilization of a deep eutectic solvent (DES) in the ink formulation induced a phase segregation between the CB and PDMS and led to a porous structure inside the printed films after being vapored. This simple and spontaneously formed conductive architecture provided superior directional bend-sensing characteristics compared to conventional random composites. The resulting flexible bending sensors displayed high bidirectional sensitivity (gauge factor of 45.6 under compressive bending and 35.2 under tensile bending), negligible hysteresis, good linearity (>0.99), and excellent bending durability (over 10,000 cycles). The multifunctional applications of these sensors, including human motion detection, object-shape monitoring, and robotic perceptions, are demonstrated as a proof-of-concept.

The demonstration of the complementary integrated circuit using printing processes is indispensable for realizing electronic devices using organic thin film transistors. Although complementary integrated circuits have advantages such as low power consumption and a wide output voltage range, complementary integrated circuits fabricated by the printing method have problems regarding driving voltage and performance. Studies on fabrication processes of electronic circuits for printing technology, including optimization and simplification, are also important research topics. In this study, the fabrication process of the printed complementary integrated circuit was simplified by applying a p-type donor-acceptor (D-A) polymer semiconductor, which is not strongly affected by the electrode work function. An inverter circuit and the ring oscillator circuit were demonstrated using this process. The fabricated ring oscillator array showed excellent performance, with low voltage operation and low performance variation.

Porous structures and micropatterning surfaces play a crucial role in the development of highly sensitive force sensors. However, achieving these two conductive architectures typically requires the synthesis of complex materials and expensive manufacturing processes. In this study, we introduce a novel conductive composite film featuring a microporous/micropyramid hybrid conductive architecture, which is achieved through a straightforward process of materials mixing and one-step screen printing. By utilizing a deep eutectic solvent in the ink component, micropores are induced in the printed composite, while the mesh of the screen mask acts as a template, resulting in a micropyramid film surface. We have successfully realized highly sensitive flexible force sensors (0.15 kPa⁻¹) with multifunctional capabilities for perceiving normal force and shear force.

We report on the mechanical fatigue behavior of printed, organic, thin-film transistors (OTFTs) based on a polymer semiconductor, investigated by repeatedly applying strain to the flexible OTFT devices and assessing their electrical characteristics after 60,000 bending cycles. As part of our investigation, we established that the rates of reduction in source/drain currents in the OTFT device depended on bending directions. Our improved understanding of the mechanical fatigue behavior of the flexible printed OTFT devices provides valuable insights into their employment in practical flexible electronics applications.

Techniques for noninvasively acquiring the vital information of infants and young children are considered very useful in the fields of healthcare and medical care. An unobstructive measurement method for sleeping infants and young children under the age of 6 years using a sheet-type vital sensor with a polyvinylidene fluoride (PVDF) pressure-sensitive layer is demonstrated. The signal filter conditions to obtain the ballistocardiogram (BCG) and phonocardiogram (PCG) are discussed from the waveform data of infants and young children. The difference in signal processing conditions was caused by the physique of the infants and young children. The peak-to-peak interval (PPI) extracted from the BCG or PCG during sleep showed an extremely high correlation with the R-to-R interval (RRI) extracted from the electrocardiogram (ECG). The vital changes until awakening in infants monitored using a sheet sensor were also investigated. In infants under one year of age that awakened spontaneously, the distinctive vital changes during awakening were observed. Understanding the changes in the heartbeat and respiration signs of infants and young children during sleep is essential for improving the accuracy of abnormality detection by unobstructive sensors.