Rajat Mahapatra

Prof. Dr. Rajat Mahapatra


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2015 in Discover Nano
Verified
Journal Article
Open access
PDF file
DJDebanjan Jana
Debanjan Jana
SRSOURAV ROY
SOURAV ROY
RPRajeswar Panja
Rajeswar Panja
MDMrinmoy Dutta
Mrinmoy Dutta
SRSheikh Ziaur Rahaman
Sheikh Ziaur Rahaman
SMSiddheswar Maikap
Siddheswar Maikap
The performances of conductive-bridging random access memory (CBRAM) have been reviewed for different switching materials such as chalcogenides, oxides, and bilayers in different structures. The structure consists of an inert electrode and one oxidized electrode of copper (Cu) or silver (Ag). The switching mechanism is the formation/dissolution of a metallic filament in the switching materials under external bias. However, the growth dynamics of the metallic filament in different switching materials are still debated. All CBRAM devices are switching under an operation current of 0.1 μA to 1 mA, and an operation voltage of ±2 V is also needed. The device can reach a low current of 5 pA; however, current compliance-dependent reliability is a challenging issue. Although a chalcogenide-based material has opportunity to have better endurance as compared to an oxide-based material, data retention and integration with the complementary metal-oxide-semiconductor (CMOS) process are also issues. Devices with bilayer switching materials show better resistive switching characteristics as compared to those with a single switching layer, especially a program/erase endurance of >105 cycles with a high speed of few nanoseconds. Multi-level cell operation is possible, but the stability of the high resistance state is also an important reliability concern. These devices show a good data retention of >105 s at >85°C. However, more study is needed to achieve a 10-year guarantee of data retention for non-volatile memory application. The crossbar memory is benefited for high density with low power operation. Some CBRAM devices as a chip have been reported for proto-typical production. This review shows that operation current should be optimized for few microamperes with a maintaining speed of few nanoseconds, which will have challenges and also opportunities for three-dimensional (3D) architecture.

9 June 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SBS. Biswas
S. Biswas
APA. D. Paul
A. D. Paul
PDP. Das
P. Das
PTPunam Tiwary
Punam Tiwary
HEH. J. Edwards
H. J. Edwards
RMRajat Mahapatra
Rajat Mahapatra
The Al/HfO x /AlO y /indium tin oxide (ITO)/polyethylene terephthalate (PET) flexible resistive random access memory (ReRAM) device was fabricated at room temperature to study the effect of AlO y interfacial layer on resistive switching (RS). Incorporating the interfacial layer AlO y improves the cycle-to-cycle, cell-to-cell uniformity and switching resistance ratio (>10 3 ). It introduces the oxygen vacancies in HfO x which controls the formation and rupture of filament and plays an important role in improving RS characteristics. The device also maintains the stable switching operation under the flexible condition and at elevated temperature up to 100 °C. The device area and temperature-dependent switching characteristics confirm the Ohmic (hopping) conduction in low-resistance state (LRS) and the space charge-limited conduction (SCLC) in high-resistance state (HRS).

15 July 2007 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
RMRajat Mahapatra
Rajat Mahapatra
ACAmit K. Chakraborty
Amit K. Chakraborty
AHAlton Horsfall
Alton Horsfall
SCS. Chattopadhyay
S. Chattopadhyay
NWN. G. Wright
N. G. Wright
KCKarl Coleman
Karl Coleman
HfO2 films were grown on SiO2∕4H-SiC and SiON∕4H-SiC layers by deposition of metallic Hf in an electron beam evaporation system followed by thermal oxidation. X-ray photoelectron spectroscopy confirmed the formation of stoichiometric HfO2 films. There is no evidence of formation of hafnium silicide or carbon pileup at the surface as well as at the interfacial layer. Electrical measurements show the presence of fewer trapped charges in the HfO2∕SiON gate dielectric stack compared to HfO2∕SiO2 stack with a comparable interface state density. The HfO2∕SiON stack layer improves leakage current characteristics with a higher breakdown field and has smaller flatband voltage shift under electrical stress, indicating improved reliability.

24 August 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
APA. D. Paul
A. D. Paul
SBS. Biswas
S. Biswas
PDP. Das
P. Das
HEH. J. Edwards
H. J. Edwards
VDV. R. Dhanak
V. R. Dhanak
RMRajat Mahapatra
Rajat Mahapatra
The Al-doped HfOₓ-based resistive memory devices have been fabricated on indium tin oxide (ITO)-coated polyethylene terephthalate (PET) flexible substrate at room temperature. X-ray photoelectron spectroscopy is used to extract the different doping percentage of Al which allows optimizing the switching performance. It improves the cycle-to-cycle and cell-to-cell uniformity of switching parameters by tuning the oxygen vacancies in HfOₓ layers. The 7.5% Al-doped HfOₓ-based flexible resistive memory device shows excellent switching characteristics such as resistance ratio (>10³) and retention (~10⁴ s). There is no degradation of memory window under the mechanical strain with bending radius ranging from 25 to 5 mm. The temperature-dependent resistive switching characteristics have also been studied. There is sufficient memory window (>10²) till ~10⁴ s at elevated temperature. The I-V curve fitting shows the ohmic (hopping) conduction in low resistance state (LRS) and the trap-controlled space charge limited conduction (SCLC) in high resistance state (HRS), supported by Arrhenius plot.

6 October 2009 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
BMBing Miao
Bing Miao
RMRajat Mahapatra
Rajat Mahapatra
RJRichard Jenkins
Richard Jenkins
JSJon Silvie
Jon Silvie
NWNicholas G. Wright
Nicholas G. Wright
AHAlton B. Horsfall
Alton B. Horsfall
The effect of radiation-introduced defects on the behaviour of HfO2-based metal-insulator-metal (MIM) capacitors as a function of gamma-ray radiation dose from 10 to 1000 krad are reported. Half the capacitors studied showed no degradation after exposure to 1000 krad from a 60Co source, whilst the remaining half showed no change to parameters, such as barrier height and dielectric constant. For the good devices, the I-V characteristics are controlled by Poole-Frenkel model, at a corresponding interface trap energy of 0.39 ~ 0.46 eV before radiation and 0.37 ~ 0.44 eV after 1000 krad. The failed devices show an substantial increase in the trap density from the as fabricated level of 1019 cm-3 to in excess of 1020 cm-3, in contrast to the good devices which show almost no change. We relate this change in defect density to the failure of devices by means of a percolation model, with a trap separation of around 2 nm.

8 February 2019 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
SMS. Maji
S. Maji
SSS. Samanta
S. Samanta
PDP. Das
P. Das
SMS. Maikap
S. Maikap
VDV. R. Dhanak
V. R. Dhanak
RMRajat Mahapatra
Rajat Mahapatra
In this paper, the authors have investigated the effect of current compliance during the set process on the resistive memory characteristics and switching mechanism of W/Hf/HfOx/TiN devices. The presence of an Hf thin cap layer enables the stable and uniform bipolar resistive switching behavior. Compliance current can modify the barrier height at the oxide-electrode interface by increasing or reducing the oxygen vacancies and induce different switching mechanisms. Low compliance current (50 μA) based switching confirms the Schottky conduction mechanism due to the interfacial effects, while high compliance current (500 μA) involves the ohmic conduction mechanism, signifying the formation of a conductive filament. No significant dispersion of reset current and reset voltage has been found for each set compliance current varying from 50 to 500 μA, indicating uniform performance of the devices. The devices also exhibited a read endurance up to 2000 cycles.