The potential of inexpensive Metal Oxide Semiconductor (MOS) gas sensors to be used for urban air quality monitoring has been the topic of increasing interest in the last decade. This paper discusses some of the lessons of three years of experience working with such sensors on a novel instrument platform (Small Open General purpose Sensor (SOGS)) in the measurement of atmospheric nitrogen dioxide and ozone concentrations. Analytic methods for increasing long-term accuracy of measurements are discussed, which permit nitrogen dioxide measurements with 95% confidence intervals of 20.0 and ozone precision of 26.8 , for measurements over a period one month away from calibration, averaged over 18 months of such calibrations. Beyond four months from calibration, sensor drift becomes significant, and accuracy is significantly reduced. Successful calibration schemes are discussed with the use of controlled artificial atmospheres complementing deployment on a reference weather station exposed to the elements. Manufacturing variation in the attributes of individual sensors are examined, an experiment possible due to the instrument being equipped with pairs of sensors of the same kind. Good repeatability (better than 0.7 correlation) between individual sensor elements is shown. The results from sensors that used fans to push air past an internal sensor element are compared with mounting the sensors on the outside of the enclosure, the latter design increasing effective integration time to more than a day. Finally, possible paths forward are suggested for improving the reliability of this promising sensor technology for measuring pollution in an urban environment.
Air pollution continues to be a problem in the urban environment. A range of different pollutant mitigation strategies that promote dispersion and deposition exist, but there is little evidence with respect to their comparative performance from both an environmental and economic perspective. This paper focuses on examining different NO2 mitigation strategies such as trees, buildings facades coated with photocatalytic paint and solid barriers in Oxford Street in London. The case study findings will support ranking the environmental and economic impacts of these different strategies to improve personal exposure conditions on the footpath and on the road in a real urban street canyon. CFD simulations of airflow and NO2 dispersion in Oxford Street in London were undertaken using the OpenFOAM software platform with the k-ε model, taking into account local prevailing wind conditions. Trees are shown to be the most cost-effective strategy, with a small reduction in NO2 concentrations of up to 0.7% on the road. However, solid barriers with and without the application of photocatalytic paint and an innovative material (20 times more expensive than trees) can improve air quality on the footpaths more substantially, up to 7.4%, yet this has a significant detrimental impact on NO2 concentrations (≤23.8%) on the road. Photocatalytic paint on building surfaces presented a minimal environmental reductions (1.2%) and economic (>100 times more expensive than trees) mitigation strategy. The findings recognised the differences between footpath and road concentrations occurred and that a focused examination of three pollution hotspots can provide more cost effective pollution mitigation. This study considers how a number of pollutant mitigation measures can be applied in a single street canyon and demonstrates the strengths and weaknesses of these strategies from economic and environmental perspectives. Further research is required to extrapolate the findings presented here to different street geometries.
A novel tropospheric NO2 DOAS retrieval algorithm optimised for a nadir-viewing satellite instrument imaging polluted areas is proposed in this work. Current satellite DOAS retrievals have relied on using a solar reference spectrum to derive a total slant column, then using either model assimilation or spatial filtering to derive the tropospheric component. In the ERrs-DOAS (Earth radiance reference sector DOAS) algorithm, tropospheric NO2 slant columns are derived using spectra averaged from measurements over unpolluted regions, thus removing the need for post-hoc separation techniques, though some residual stratospheric biases may still remain. To validate the ERrs-DOAS algorithm, DOAS retrievals were performed on modelled spectra created by the radiative transfer model SCIATRAN, as well as L1B Earth radiance data measured by the NASA/KNMI Ozone Monitoring Instrument (OMI). It was found that retrievals using an Earth radiance reference produce spatial distributions of tropospheric NO2 over eastern China during June 2005 that highly correlate with those derived using existing retrieval algorithms. Comparisons with slant columns retrieved by the operational NO2 retrieval algorithm for OMI (OMNO2A) show that the ERrs-DOAS algorithm greatly reduces the presence of artificial across-track biases (stripes) caused by calibration errors, as well as the removal of path length enhancement in off-nadir pixels. Analysis of Pacific SCDs suggests that the algorithm also produces a 27% reduction in retrieval uncertainty, though this may be partially due to biases introduced by differences in the retrieval algorithm settings. The ERrs-DOAS technique also reveals absorption features over the Sahara and similar regions characteristic of sand and liquid H2O absorption, as first discovered in the analysis of GOME-2 NO2 retrievals.
5 September 2018 in Aerosol Science and Technology