Fluid-fueled molten-salt reactors (MSRs) are actively being developed by several companies, with plans to deploy them internationally. The current IAEA inspection tools are largely incompatible with the unique design features of liquid fuel MSRs (e.g., the complex fuel chemistry, circulating fuel inventory, bulk accountancy, and high radiation environment). For these reasons, safeguards for MSRs are seen as challenging and require the development of new techniques. This paper proposes one such technique through the observation of the reactor’s off-gas. Any reactor design using low-enriched uranium will build up plutonium as the fuel undergoes burnup. Plutonium has different fission product yields than uranium. Therefore, a shift in fission product production is expected with fuel evolution. The passive removal of certain gaseous fission products to the off-gas tank of an MSR provides a valuable opportunity for analysis without significant modifications to the design of the system. Uniquely, due to the gaseous nature of the isotopes, beta particle emissions are available for observation. The ratios of these fission product isotopes can, thus, be traced back to the relative amount and types of fissile isotopes in the core. This proposed technique represents an effective safeguards tool for bulk accountancy which, while avoiding being onerous, could be used in concert with other techniques to meet the IAEA’s timeliness goals for the detection of a diversion.
Background Molten salt reactors (MSRs) can have different behavior to various types of accidents compared to conventional reactors. MSRs also have different safety limitations that many are unfamiliar with. With limited operating time, simulations with a dynamic model are a valuable method of analyzing the effects of potential accidents scenarios. Methods The model used in this work is the NERTHUS Dynamic Model in MATLAB-Simulink, which is a generic MSR design agnostic to any specific reactor design. The type of accident investigated in this work are pump failures in each of the fluid loops (i.e., primary, secondary, and tertiary) with no control rod movement and the only response being a trip to the once-through steam generator feedwater at different delay times. Pump failure was modeled as an exponential decay curve to represent the effects momentum would have on the resulting flow coastdown. Results The results of these simulations show that an MSR could be safely powered down in the event of a pump failure by decreasing the feedwater flow rate to the steam generator in a timely manner. A delayed response leads to fluid temperatures in the loops rapidly decreasing to the point where freezing of the coolant salts can become a concern. Conclusions The trending behavior across the simulations is that the temperatures between the reactor core outlet and the location of the pump failure increase compared to pre-transient conditions. The temperatures of the loops further downstream than the pump failure will decrease unless action is taken.
We have attached four separate papers that are linked together. We believe they would do well together in the same edition as they build off of each other. The first paper thoroughly explains the methodology and mechanics of making a dynamic model of a molten-salt reactor. The second paper presents a neutronics model of a generic MSR. The third uses the results of the neutronics model to make an associated dynamics model of a generic MSR. The fourth paper uses the dynamic model to conduct an analysis of MSR load following with variable xenon removal rates. Individual abstracts are included with each paper's PDF.