We have attached four separate papers that are linked together. We believe they would do well together in the same edition as they build off of each other. The first paper thoroughly explains the methodology and mechanics of making a dynamic model of a molten-salt reactor. The second paper presents a neutronics model of a generic MSR. The third uses the results of the neutronics model to make an associated dynamics model of a generic MSR. The fourth paper uses the dynamic model to conduct an analysis of MSR load following with variable xenon removal rates. Individual abstracts are included with each paper's PDF.
This paper presents a reproducible reduced-order dynamic model of the Molten Salt Research Reactor (MSRR) in OpenModelica for three analyses: startup to criticality, nonlinear step transients, and power-dependent small-signal response. The model combines transport-aware modified point kinetics for circulating fuel, linear temperature-reactivity feedback, grouped decay-heat dynamics, and lumped thermal-hydraulic nodes in a shared framework with one-region and nine-region core options. The startup analysis explores a staged, source-assisted approach to criticality with progressive primary-flow increases and quantifies the associated delayed-neutron precursor drift compensation. The full startup sequence reaches approximately 1 MW during the final heat-removal ramp. The dynamics study explores step-response transients and multi-power sinusoidal frequency sweeps from 10^-3 to 10^1 rad/s, with accepted low-power reruns using extended settle times and reduced forcing amplitude to preserve small-signal behavior.Results show operating-point-dependent low-pass behavior and a modest core segmentation effect, with the nine-region model exhibiting about 3 dB lower low-frequency gain than the one-region model at nominal power. The primary contribution is an integrated and transparent workflow linking legacy reduced-order MSR dynamics methodology to an open-source, repository-based OpenModelica implementation suitable for design-stage operational and control studies.