Due to the increasing proportion of wind power connected to the grid, day-ahead wind power prediction plays a more and more important role in the operation of the power system. This paper proposes a day-ahead wind power short-term prediction model based on deep learning (DWT_AE_BiLSTM). Firstly, discrete wavelet transform (DWT) is used to denoise the data, then an autoencoder (AE) technology is used to extract the data features, and finally, bidirectional long short-term memory (BiLSTM) is used for prediction. To verify the effectiveness of the proposed DWT_AE_BiLSTM model, we studied three different power stations and compared their performance with the shallow neural network model. Experimental analysis shows that this model is more competitive in forecasting accuracy and stability. Compared with the BP model, the proposed model has increased by 3.86%, 3.22% and 3.42% in three wind farms, respectively.

This study introduces a data augmentation technique based on generative adversarial networks (GANs) to improve the accuracy of day-ahead wind power predictions. To address the peculiarities of abrupt weather data, we propose a novel method for detecting mutation rates (MR) and local mutation rates (LMR). By analyzing historical data, we curated datasets that met specific mutation rate criteria. These transformed wind speed datasets were used as training instances, and using GAN-based methodologies, we generated a series of augmented training sets. The enriched dataset was then used to train the wind power prediction model, and the resulting prediction results were meticulously evaluated. Our empirical findings clearly demonstrate a significant improvement in the accuracy of day-ahead wind power prediction due to the proposed data augmentation approach. A comparative analysis with traditional methods showed an approximate 5% increase in monthly average prediction accuracy. This highlights the potential of leveraging mutated wind speed data and GAN-based techniques for data augmentation, leading to improved accuracy and reliability in wind power predictions. In conclusion, this paper presents a robust data augmentation method for wind power prediction, contributing to the potential enhancement of day-ahead prediction accuracy. Future research could explore additional mutation rate detection methods and strategies to further enhance GAN models, thereby amplifying the effectiveness of wind power prediction.

The purpose of image fusion is to combine the source images of the same scene into a single composite image with more useful information and better visual effects. Fusion GAN has made a breakthrough in this field by proposing to use the generative adversarial network to fuse images. In some cases, considering retain infrared radiation information and gradient information at the same time, the existing fusion methods ignore the image contrast and other elements. To this end, we propose a new end-to-end network structure based on generative adversarial networks (GANs), termed as FLGC-Fusion GAN. In the generator, using the learnable grouping convolution can improve the efficiency of the model and save computing resources. Therefore, we can have a better trade-off between the accuracy and speed of the model. Besides, we take the residual dense block as the basic network building unit and use the perception characteristics of the inactive as content loss characteristics of input, achieving the effect of deep network supervision. Experimental results on two public datasets show that the proposed method performs well in subjective visual performance and objective criteria and has obvious advantages over other current typical methods.

The evaluation of the effects of artificial precipitation enhancement remains one of the most important and challenging issues in the fields of meteorology. Rainfall is the most important evaluation metric for artificial precipitation enhancement, which is mainly achieved through physics-based models that simulate physical phenomena and data-driven statistical models. The series of effect evaluation methods requires the selection of a comparison area for effect comparison, and idealized assumptions and simplifications have been made for the actual cloud precipitation process, leading to unreliable quantitative evaluation results of artificial precipitation effects. This paper proposes a deep learning-based method (UNET-GRU) to quantitatively evaluate the effect of artificial rainfall. By comparing the residual values obtained from inverting the natural evolution grid rainfall of the same area under the same artificial rainfall conditions with the actual rainfall amount after artificial rainfall operations, the effect of artificial rainfall can be quantitatively evaluated, effectively solving the problem of quantitative evaluation of artificial precipitation effects. Wuhan and Shiyan in China are selected to represent typical plains and mountainous areas, respectively, and the method is evaluated using 6-min resolution radar weather data from 2017 to 2020. During the experiment, we utilized the UNET-GRU algorithm and developed separate algorithms for comparison against common persistent baselines (i.e., the next-time data of the training data). The prediction of mean squared error (MSE) for these three algorithms was significantly lower than that of the baseline data. Moreover, the indicators for these algorithms were excellent, further demonstrating their efficacy. In addition, the residual results of the estimated 7-h grid rainfall were compared with the actual recorded rainfall to evaluate the effectiveness of artificial precipitation. The results showed that the estimated rainfall was consistent with the recorded precipitation for that year, indicating that deep learning methods can be successfully used to evaluate the impact of artificial precipitation. The results demonstrate that this method improves the accuracy of effect evaluation and enhances the generalization ability of the evaluation scheme.

Accurate photovoltaic (PV) power forecasting is crucial for stable grid integration, particularly under rapidly changing weather conditions. This study presents an ultra-short-term forecasting model that integrates sky imager data and meteorological radar data, achieving significant improvements in forecasting accuracy. By dynamically tracking cloud movement and estimating cloud coverage, the model enhances performance under both clear and cloudy conditions. Over an 8-day evaluation period, the average forecasting accuracy improved from 67.26% to 77.47% (+15%), with MSE reduced by 39.2% (from 481.5 to 292.6), $R^2$ increased from 0.724 to 0.855, NSE improved from 0.725 to 0.851, and Theil’s U reduced from 0.42 to 0.32. Notable improvements were observed during abrupt weather transitions, particularly on 1 July and 3 July, where the combination of MCR and sky imager data demonstrated superior adaptability. This integrated approach provides a robust foundation for advancing ultra-short-term PV power forecasting.

Photovoltaic (PV) power generation has attracted widespread interest as a clean and sustainable energy source, with increasing global attention given to renewable energy. However, the operation and monitoring of PV power generation systems often result in large amounts of data containing missing values, outliers, and noise, posing challenges for data analysis and application. Therefore, PV data cleaning plays a crucial role in ensuring data quality, enhancing data availability and reliability. This study proposes a PV data cleaning method based on Rasterized Data Image Processing (RDIP) technology, which integrates rasterization and image processing techniques to select optimal contours and extract essential data. To validate the effectiveness of our method, we conducted comparative experiments using three data cleaning methods, including our RDIP algorithm, the Pearson correlation coefficient interpolation method, and cubic spline interpolation method. Subsequently, the cleaned datasets from these methods were utilized for power prediction using two linear regression models and two neural network models. The experimental results demonstrated that data cleaned using the RDIP algorithm improved the short-term forecast accuracy by approximately 1.0% and 3.7%, respectively, compared to the other two methods, indicating the feasibility and effectiveness of the RDIP approach. However, it is worth noting that the RDIP technique has limitations due to its reliance on integer parameters for grid division, potentially leading to coarse grid divisions. Future research efforts could focus on optimizing the selection of binarization thresholds to achieve better cleaning results and exploring other potential applications of RDIP in PV data analysis.