Hyperchromatic systems are characterized by strong longitudinal chromatic aberrations that are quantitatively described by very small equivalent Abbe numbers. In this contribution, doublet systems are systematically studied with the aim of obtaining extreme values for the equivalent Abbe numbers. Both purely refractive combinations and hybrid systems of diffractive and refractive components are considered. Chromatic axial splitting is determined as a function of the optical powers of the individual components as well as the dispersion properties of the materials involved. In order to determine actual implementable configurations for extremely small equivalent Abbe numbers, a systematic ray-trace analysis is performed in addition to paraxial studies, taking into account geometric constraints on lens curvatures and considering also complete, continuous dispersion curves. As extreme values for systems with appropriate imaging quality, an equivalent Abbe number of υ ~ = − 2.5 is obtained for the purely refractive approach, and υ ~ = 0.4 for the hybrid case, which is more than 8 times smaller than the absolute value of a single diffractive lens.

This work provides a comprehensive analysis of the maximum chromatic axial split of two-element hyperchromats, with the distance between the two lenses being a key variable. Purely refractive and diffractive systems are considered, as well as hybrid layouts combining refractive and diffractive elements. In order to achieve extreme chromatic axial splitting and accordingly a minimum equivalent Abbe number for lens combinations, a three-step procedure was used. In the first paraxial step, purely optical quantities such as focal lengths of the lenses, inter-lens distances and dispersion properties of the lenses were investigated. In the second step, which also takes place in the paraxial domain, additional geometric boundary conditions such as the radii, diameters and thicknesses of the lenses are taken into account. The results of this step serve as an input for the final optimization using optical design software, which derives practical solutions for minimum equivalent Abbe numbers with diffraction-limited image quality. As a significant result, the comparison with directly cemented lens doublets shows that the introduction of a distance between the elements allows for a much stronger chromatic decomposition for refractive, diffractive and also hybrid combinations. Quantitatively, the minimum equivalent Abbe number for refractive systems is reduced from 2.5 (without spacing) to 1.79 (with spacing). For hybrid combinations, a corresponding reduction from 0.4 to 0.29 is achieved.

This paper demonstrates a method to significantly enhance the detection efficiency of filter-based spectral sensors without the use of additional dichroic optics for spectral preselection. The fundamental principle is that light reflected from one interference filter or filter segment can be used consecutively, reducing the overall system losses. The proof-of-concept is presented using two compact optical modules. The first module uses 10 individual filters between 520 and 800 nm, and the second is capable of continuous spectrum acquisition between 450 and 825 nm using a linear variable filter (LVF) as a key element. An efficiency increase factor of up to approximately 100 compared to a common system, where the entire LVF is directly illuminated, was demonstrated.

This paper presents concept, optical design, and the implementation of a novel, to the best of our knowledge, lithographic exposure tool for the fabrication of rotationally symmetric meso- and microscale optical structures using a variable ring-shaped light distribution. Compared to the conventional lithographic technique of direct writing in Cartesian coordinates, which is intrinsically suboptimal for the fabrication of rotationally symmetric optical structures, this approach allows for fast exposure and avoids disturbing stitching effects. The diameter of the exposure ring varies between 1.6 and 6.5 mm, and the ring width measures ∼ 75 µ m full width at half-maximum for all diameters. The basic capabilities of the exposure tool are demonstrated by the fabrication of exemplary meso- and microscale structures such as diffractive axicon elements, phase rings, Fresnel zone plates and zone plate arrays.

This study explores the design and optimization of cascaded double-hyperchromatic optical systems (i.e., 2×2 lenses), focusing on achieving an extremely linear axial spectral decomposition characterized by an exceptionally low equivalent Abbe number. The investigation involves two double hyperchromats, considering both purely refractive systems and hybrid configurations that combine refractive and diffractive elements. For purely refractive systems, alternating focal length signs of divergent and collective lenses are crucial to achieve significant axial chromatic dispersion. In hybrid systems, the position of the diffractive optical element (DOE) and the selection of focal lengths play key roles in obtaining extremely low equivalent Abbe numbers. The optimized systems demonstrate absolute equivalent Abbe numbers of 0.983 for purely refractive and 0.65 for hybrid systems—more than four times lower than the absolute Abbe number of a single diffractive element. Notably, even systems using standard materials exhibit significantly low equivalent Abbe numbers of 2.5 and 1.4 for pure refractive and hybrid configurations, respectively. These results offer promising opportunities for improving optical applications based on axial spectral decomposition, overcoming previous limitations of axial chromatic spreading.

Hybrid polymers combine the benefits of inorganic and organic material properties, offering superior thermal, mechanical, and chemical stability, making them ideal for optical applications. This study focuses on the fabrication and characterization of antireflective (AR) structures within hybrid polymers using reactive ion etching (RIE). The etching process produces nanopillars with controlled heights, achieving excellent AR performance across a broad spectral range from 450 nm to 2 µm. Optical characterization, including angle-resolved transmission and reflection measurements, shows that the structured samples maintain high transmission efficiency and reduced reflectance at varying incidence angles. Thermal stability tests reveal that the AR structures preserve their optical properties after exposure to temperatures up to 250 °C. Higher temperatures cause significant material yellowing, which is attributed to changes in the bulk material rather than damage to the structured surface. Hydrophobicity measurements show significant water repellency in structured samples, with contact angles more than twice those of unstructured layers. These findings highlight the potential of hybrid polymers with moth-eye-inspired nanostructures for high-performance, durable optical components in demanding environments.