Individual mobility vehicles are revolutionizing transportation in the urban environment. Among them, e-scooters are one of the fastest growing vehicles. However, these vehicles have some drawbacks such as incompatibility among different chargers or reduced autonomy, which especially affects e-scooters rental. Wireless charging is presented as a solution to these drawbacks since it allows the batteries to be charged without user intervention. This paper addresses the design process and implementation details related to a magnetic-resonance charger for an e-scooter. In contrast to the previous works, we present a comprehensive approach that addresses the design of the coil topology, the dimensions of the ferrite tiles, the definition of the gap and the optimised control for a CC-CV charge. The main contribution of the work is the consideration of all these issues jointly while we also take into account the vehicle’s materials and structure for an accurate design and implementation. The dimensions of the vehicle impose a strong restriction on the coil design. Therefore, a detailed analysis about the location of the secondary and primary coils in a real e-scooter is executed with Ansys Maxwell. The study about the geometries of ferrite tiles is also performed considering the particularities of this type of vehicle. This study led to an optimal solution for the coil geometries and ferrite placement that minimizes the costs. The proposed system has been validated with the implementation of a real prototype of 100 W, to which a CC-CV control has been incorporated to achieve a safe charge for different battery states. The control can be easily adapted for a wide range of e-scooters. In this way, the use of this type of chargers on public installations can be maximized.
Unmanned aerial vehicles are clear candidates to benefit from wireless power transfer, as it can facilitate their charging process and even allow them to charge autonomously.
Wireless power transfer (WPT) has been established as a feasible solution for a safe and efficient battery charge in the Electric Vehicle (EV). In this context, dynamic wireless power transfer (DWPT) is presented as an alternative to reduce battery size, improve logistic processes (as the vehicle charges in movement) and it can also help with the integration of renewable energy sources. Most research work on dynamic charging uses the First Harmonic Approximation (FHA) method for circuital analysis. This method ignores harmonic content, resulting in imprecise results during the design process, which lead to unreliable implementations. In this paper, the authors analyse the precision of the Total Harmonic Approximation (THA) method as a more precise formulation in the particular context of dynamic charging. A mathematical analysis is also developed to derive the Total Harmonic Distortion (THD) in the resonant circuit, which is a relevant parameter in time-varying conditions as the application under study is. This formulation of THD is taken into account in the design process of the LCC-Series compensation, which is widely used in DWPT systems nowadays. Indeed, from this mathematical model, design guidelines are proposed to reduce the THD while maintaining high efficiency value. In this framework, phase shifting technique is applied in addition to this guideline as a simple but effective solution to reduce harmonics. Adjusting precisely the phase shift angle, the THD can be reduced avoiding the oversize of the components. A series of experiments are performed in the laboratory to validate the mathematical models and the feasibility of the proposal.
23 February 2026 in IEEE Transactions on Power Electronics
This paper presents an innovative methodology for designing resonance compensation in dynamic wireless power transfer systems for electric vehicles. The proposed technique leverages an optimization algorithm to identify the optimal combination of components that maximizes transferred energy while maintaining high transmission efficiency, achieving an effective trade-off between these key performance metrics. Unlike conventional design approaches, this method incorporates component tolerances and employs Monte Carlo simulations to estimate the probability of meeting desired performance criteria. This probabilistic analysis accounts for the combined effects of multiple tolerances, providing a robust evaluation of the solution's reliability by considering both manufacturing variations and aging effects. Designers can use this probabilistic insight to refine their choices by selecting components with stricter tolerances or exploring alternative designs. Furthermore, a MATLAB-based application, MatDWPT, has been developed to automate the design process. This user-friendly tool enables designers to input system specifications and receive optimized component recommendations, with all circuit analysis and optimization steps performed transparently in the background. The results obtained using the toolbox align with experimental measurements.
The Voltage Source Converter (VSC) is the basis of STATCOMs and other power systems. It is composed of a three-phase inverter in which the activation of the switching devices must be controlled to generate the intended signals. The control technique used to switch the power devices affects the performance of the converter in terms of harmonic distortion mainly. Although some complex modulation techniques have been proposed in the related literature, local controllers opt for simpler methods as they provide robustness and they ease the implementation. In this paper, we propose a simple but effective technique to switch the transistors of a three-phase inverter with a Space Vector Modulation (SVM) supported by a Finite-State Machine (FSM). With this model, the switching technique can be easily implemented in low-cost microcontrollers with reduced memory and computational resources if code optimisation is performed. With an electrical analysis, we have designed a low-pass band filter adequate for the proposed switching technique. In a laboratory prototype, the performance of this proposal is evaluated under static and dynamic conditions. When compared with other control techniques (classical SVM and PWM), we conclude that a similar harmonic distortion is achieved.