Aiming at the problem that online parameter identification, based on the Model Reference Adaptive System (MRAS), is easily affected by the high-frequency noise of the sensor, an improved MRAS, based on variable bandwidth linear Active Disturbance Rejection Control (ADRC) adaptive law, is proposed. The proposed ADRC adaptive law, including an extended state observer, exhibits good anti-disturbance ability while effectively tracking the error signal through adjusting the bandwidth of the controller according to the observation error. When the observation error is large, the bandwidth of the controller is increased to enhance the tracking accuracy; in the opposite situation, the bandwidth is reduced to improve the anti-disturbance performance. To illustrate feasibility, a stability analysis of the proposed ADRC adaptive law is carried out and some comparison and validation experiments are designed to identify the inductance and flux linkage of the permanent magnet synchronous motor (PMSM). The experimental results show that the proposed method has better anti-disturbance performance than the MRAS based on traditional Proportional Integral (PI) adaptive law or switched PI adaptive law.
Both DQN and M-DQN is commonly used for mobile robot path planning, with the problem of relatively low efficiencies of the action selection policy and the reward function when coping with complex environments. To solve the problem, an improved $\epsilon$ -UCB action selection method based on neural network is proposed to fit the uncertainty of state-action pairs, which effectively improves the exploration efficiency. Meanwhile, aiming at the effectiveness of the reward function, a multi-goal fusion reward function is proposed to improve the guidance ability. Further, the proposed $\epsilon$ -UCB action selection policy and the multi-goal fusion reward function are introduced into the M-DQN framework to complete the path planning task of the mobile robot. Finally, some comparative experiments are carried out to verify the effectiveness of the proposed method. The experimental results show that the proposed method exhibits faster convergence speed and higher learning efficiency for the path planning of mobile robots in complex environments than other existing methods.
Purpose: Developing general closed-form solutions for six-degrees-of-freedom (DOF) serial robots is a significant challenge. This paper thus aims to present a general solution for six-DOF robots based on the product of exponentials model, which adapts to a class of robots satisfying the Pieper criterion with two parallel or intersecting axes among its first three axes. Design/methodology/approach: The proposed solution can be represented as uniform expressions by using geometrical properties and a modified Paden–Kahan sub-problem, which mainly adopts the screw theory. Findings: A simulation and experiments validated the correctness and effectiveness of the proposed method (general resolution for six-DOF robots based on the product of exponentials model). Originality/value: The Rodrigues rotation formula is additionally used to turn the complex problem into a solvable trigonometric function and uniformly express six solutions using two formulas.
10 February 2025 in Computer Applications in Engineering Education