A large number of urban surface energy balance models now exist with different assumptions about the important features of the surface and exchange processes that need to be incorporated. To date, no comparison of these models has been conducted; in contrast, models for natural surfaces have been compared extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the methods and first results from an extensive international comparison of 33 models are presented. The aim of the comparison overall is to understand the complexity required to model energy and water exchanges in urban areas. The degree of complexity included in the models is outlined and impacts on model performance are discussed. During the comparison there have been significant developments in the models with resulting improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling approaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the degree of model complexity required for accurate simulations. There is evidence that some classes of models perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler models perform as well as the more complex models based on all statistical measures. Generally the schemes have best overall capability to model net all-wave radiation and least capability to model latent heat flux.
7 October 2010 in International Journal of Climatology
We investigated the influence of meteorological factors that affect ozone in summer using both measurement analysis and numerical simulation. The results show that there is a close relationship between changes in meteorological conditions and variations in ozone concentrations over the central Kanto area. In summer, up to 84% of long-term variations in peak ozone concentrations may be accounted for by changes in the seasonally averaged daily maximum temperatures and seasonally averaged wind speeds. The ozone episodes in the Kanto region are dominated by three major patterns, of which Patterns I and II are regular summertime pressure patterns with a 26% and 16% frequency of occurrence, respectively. A detailed process analysis of ozone formation under urban heat island (UHI) at two areas in the Kanto region – urban and rural area – indicates that ozone formation is mainly controlled by chemistry, dry deposition, vertical transport, and horizontal transport processes. The groundlevel ozone concentrations are enhanced mainly by the vertical mixing of ozone-rich air from aloft, whereas dry deposition process mainly depletes ozone. Horizontal transport and chemistry processes play opposite roles in the net change of ozone concentration between the two areas. The results of numerical simulations also indicate that the sea breeze has significant effects on the ozone accumulation and distribution in the Kanto area. The high ozone was first observed in urban area and then was transported to the rural area by sea breeze. At rural area, the highest ozone concentrations were found in late afternoon, about two hours later in comparison with the urban area
A distinct feature of Wuhan is that almost a quarter of the total area of this city is covered with water, leading to its unique hot and humid climate characteristics in summer. However, according to records, water area in built-up zone of Wuhan has been reduced by 130.5 km2 from 1965 to 2008, while the annual average air temperature has been increased by more than 3℃. To investigate the quantitative connection between the water area reduction and air temperature increase, three scenarios were simulated in a summer; to evaluate the impact of water reduction on the local thermal environment in different water areas; and to study the impact of water reduction on the urban heat island (UHI) phenomenon. Meso-scale meteorological models of Weather Research and Forecasting model were applied in this study for quantitative assessment and prediction. With the predictions, this study reveals that the decreased water area could affect air temperature, wind velocity and wind flow direction, energy balance and the UHI intensity. The simulations show that areas with significant wind velocity, wind direction and air temperature differences are distributed among the downwind zones. Moreover, the areas with high UHI intensity are wider and farther from the boundary of urban areas because of the reduction of water areas.