This paper provides an in-depth assessment of Active Magnetic Bearings (AMBs), which are electromagnetic bearings powered by power electronic components for high-speed equipment. The paper highlights the advantages of AMBs as frictionless bearings that utilize magnetic force to support the rotor, resulting in reduced wear, lower losses, and extended lifespan compared to classical ball bearings. AMBs are particularly well-suited for high-speed applications and demonstrate compatibility with both clean environments, such as renewable energy sectors, and challenging conditions like extreme pressures, temperatures, and harsh environments. However, controlling AMBs presents difficulties due to their nonlinear and inherently unstable nature. The paper focuses on examining the benefits and drawbacks of AMBs, including fault analyses. It further emphasizes recent advancements in power electronics supervision, including quick-switching power components, power conversion devices, and advanced control techniques, which have significantly expanded the potential applications of AMBs across various industries. Additionally, the paper explores the electromagnetic setups, electrical converters, sensors, and optimization techniques employed in AMBs, providing valuable insights into their construction, fault-finding methods, control strategies, and ongoing and future research trends.
In the rotating machinery sector, active magnetic bearing (AMB) has drawn great attention due to its benefits over the conventional bearing system. The high-speed technology is enhanced by AMBs, which also reduce maintenance costs and eliminate friction loss. This paper presents a unique, simpler, efficient design and hardware implementation for high-speed applications using two-coil I-type active magnetic bearings. To maintain the 10 mm air gap between the actuator and the rotor, two categories of controllers have been designed for the proposed system to control the position and another for detecting the coil current through the power amplifier. The AMB system is incorporated into a 3D finite element model for determining magnetic properties. The magnetic analysis is then carried out under various situations, and the attractive force characteristics have been evaluated for this suggested system to check the performance of the multicoil AMB system along with the stability analysis. The system is designed and simulated in MATLAB Simulink and implemented in hardware to validate the different outputs viz. position response and current response. Finally, an AC magnet is designed to rotate the rotor after the levitation, and a higher speed of 19,643 rpm is achieved in comparison to conventional bearings, which can be utilized in different industrial applications.
22 April 2021 in Electric Power Components and Systems
Active magnetic bearing (AMB) has drawn such a significant amount of consideration in the rotating machinery industry because of its advantages against conventional bearing such as rolling cement bearing, fluid film, etc. AMBs introduce subsidiary features to the high-speed system, such as remove friction loss, reduce maintenance. This manuscript describes a novel, simplified, and economical design, analysis, and hardware implementation of single-coil I-type active magnetic bearing for high-speed application. Two types of controllers have been for the proposed system for the 10 mm air gap, one for sensing the position and another for sensing the current. A 3D finite element model of the AMB system is built. Then the magnetic analysis is performed under different conditions and the attractive force characteristics for this proposed system have been analyzed by the 3D finite element method. In the test setup speed of AMB is compared with conventional bearing. From the test result, it is observed that the designed magnetic bearing meets the high-speed application criteria.