Additively manufactured lattice structures are extensively utilized because of their unique characteristics, including lightweight design, high energy absorption capabilities, and exceptional specific strength. This study focuses on accurately simulating the dynamic mechanical behavior of AlSi10Mg lattice structures produced using selective laser melting (SLM). A series of experimental studies has been conducted to establish the parameters of the J–C hardening and damage model for additively manufactured AlSi10Mg alloys. The lattice structures, featuring face-centered cubic (FCC) and diamond topologies with a 25% designed relative density, underwent scanning electron microscopy (SEM) for geometrical precision assessment. Dynamic compressive behavior was investigated via split Hopkinson pressure bar (SHPB) tests. Numerical simulations in Ls-Dyna, utilizing the identified J–C parameters, were employed to replicate SHPB tests. Findings indicate that the specific strength and the specific energy absorption values of FCC lattice samples have higher than those of diamond samples at strain rates of 750 and 1100 s−1. While the overall strains and deformation modes were well predicted by numerical analyzes, a deeper insight into local stress concentrations under dynamic loads was achieved. Consequently, the obtained J–C model parameters offer valuable insight into characterizing the dynamic behavior of AlSi10Mg lattice structures produced by SLM.
1 July 2017 in Materials Science and Engineering: A
In the present study, the effect of thermo-mechanical treatments on the shape memory and the superelastic characteristics of Cu 73 Al 16 Mn 11 (at%) shape memory alloy were investigated. 10%, 50% and 70% cold rolling and subsequent heat treatment processes were conducted to achieve strengthening via grain size refinement. 70% grain size reduction compared to the homogenized condition was obtained using 70% cold rolling and subsequent recrystallization heat treatment technique. Moreover, 10% cold rolling was applied to homogenized specimen to reveal the influence of the low percentage cold rolling reduction with no heat treatment on shape memory properties of Cu 73 Al 16 Mn 11 (at%) alloy. Stress free transformation temperatures, monotonic tension and superelasticity behaviors of these samples were compared with those of the as-aged sample. Isobaric heating–cooling experiments were also conducted to see the dimensional stability of the samples as a function of applied stress. The 70% grain-refined sample exhibited better dimensional stability showing reduced residual strain levels upon thermal cycling under constant stress compared with the as-aged material. However, no improvement was achieved with grain size reduction in the superelasticity experiments. This distinctive observation was attributed to the difference in the magnitude of the stress levels achieved during two different types of experiments which were the isobaric heating–cooling and superelasticity tests. Intergranular fracture due to the stress concentration overcame the strengthening effect via grain refinement in the superelasticity tests at higher stress values. On the other hand, the strength of the material and resistance of material against plastic deformation upon phase transformation were increased as a result of the grain refinement at lower stress values in the isobaric heating–cooling experiments.
1 March 2016 in International Journal of Solids and Structures