Floating structures have become a major part of offshore structure communities as offshore engineering moves from shallow waters to deeper ones. Floating installation ships or platforms are widely used in these engineering operations. Unexpected wave-induced motions affect floating structures, especially in harsh sea conditions. Horizontal motions on the sea surface can be offset by a dynamic positioning system, and heave motions can be controlled by a heave compensation system. Active heave compensation (AHC) systems are applied to control vertical heave motions and improve safety and efficiency. Predictive control based on machine learning prediction algorithms further improves the performance of active heave compensation control systems. This study proposes a predictive control strategy for an active heave compensation system with a machine learning prediction algorithm to minimise the heave motion of crane payload. A predictive active compensation model is presented to verify the proposed predictive control strategy, and proportion–integration–differentiation control with predictive control is adopted. The reliability of back propagation neural network (BPNN) and long short-term memory recurrent neural network (LSTM RNN) prediction algorithms is proven. The influence of the predictive error on compensation performance is analysed by comparing predictive feedforward cases with actual-data feedforward cases. Predictive feedforward control with regular and irregular wave conditions is discussed, and the possible strategies are examined. After implementing the proposed predictive control strategy based on a machine learning algorithm in an active heave compensation system, the heave motion of the payload is reduced considerably. This investigation is expected to contribute to the motion control strategy of floating structures.
The International Maritime Organization has developed the second-generation intact stability criteria. Thus, damage stability criteria can be established in the future. In order to identity the capsizing probability of damaged ship under dead ship condition, this paper investigates two methods that can be used to research the capsizing probability in time domain, which mainly focus on the nonlinear righting lever GZ curve solution. One method subjects the influence of damaged tanks on the hull shape down to the wind and wave, and the other method is consistent with the real-time calculation of the GZ curve. On the basis of one degree of freedom rolling equation, the solution is Monte Carlo method, and a damaged fishery bureau vessel is taken as a sample ship. In addition, the results of the time-domain capsizing probability under different loading conditions are compared and analyzed. The relation of GM and heeling angle with the capsizing probability is investigated, and its possible reason is analyzed. On the basis of combining the time-domain flooding process with the capsizing probability calculation, this research aims to lay the foundation for the study of capsizing probability in time domain under dead ship condition, as well as provide technical support for capsizing mechanism of dead ship stability and damage stability criteria establishment in waves.
Under shut-in conditions in deepwater drilling, the gas invading the bottomhole ascends along the wellbore and accumulates at the wellhead, forming a high-pressure trap, challenging wellbore pressure prediction and control. The accurate prediction of bottomhole pressure is essential for well control during shut-in conditions. In this study, a new bottomhole pressure prediction model that considers wellbore storage effects was developed to address gas invasion issues during shut-in conditions in deepwater drilling. This model incorporates factors such as the wellbore elasticity, fluid compressibility, and drilling fluid filtration loss. The calculated values show good agreement with experimental values, with the average absolute and relative errors of 2.095 × 10−2 MPa and 3.71%, respectively. Meanwhile, the results indicate that the bottomhole pressure initially increases logarithmically over time and then transitions to a linear increase, and the residual flow and gas ascent significantly influence the bottomhole pressure. Finally, the effects of various parameters on the bottomhole pressure were evaluated. Larger initial pressure differential, exposed thickness, and formation permeability accelerate the increase in bottomhole pressure during residual flow stage, while smaller filter cake permeability and drilling fluid viscosity quicken its increase during gas ascent stage. Drilling fluid density affects the initial pressure and the residual flow duration. The findings of this study would provide theoretical support for well control operations in deepwater drilling.