Niloufar Keshmiri

Ms. Niloufar Keshmiri


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2020 in IEEE Access
Verified
Journal Article
Open access
NKNiloufar Keshmiri
Niloufar Keshmiri
DWDeqiang Wang
Deqiang Wang
BABharat Agrawal
Bharat Agrawal
RHRuoyu Hou
Ruoyu Hou
AEAli Emadi
Ali Emadi
Gallium Nitride High Electron Mobility Transistors (GaN HEMTs) enable higher efficiency, higher power density, and smaller passive components resulting in lighter, smaller and more efficient electrical systems as opposed to conventional Silicon (Si) based devices. This paper investigates the detailed benefits of using GaN devices in transportation electrification applications. The material properties of GaN including the applications of GaN HEMTs at different switch ratings are presented. The challenges currently facing the transportation industry are introduced and possible solutions are presented. A detailed review of the use of GaN in the Electric Vehicle (EV) powertrain is discussed. The implementation of GaN devices in aircraft, ships, rail vehicles and heavy-duty vehicles is briefly covered. Future trends of GaN devices in terms of cost, voltage level, gate driver design, thermal management and packaging are investigated.

3 March 2023 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
RPRachit Pradhan
Rachit Pradhan
NKNiloufar Keshmiri
Niloufar Keshmiri
AEAli Emadi
Ali Emadi
The powertrain voltages in battery electric vehicles (BEVs) have witnessed an upward trend due to advantages such as reduced runtime losses and extremely high DC fast charging power levels; aiding in reduced range anxiety and lower battery charging duration. This trend requires original equipment manufacturers (OEMs) to re-assess the design of electronic sub-assemblies (ESAs). Due to newly released DC fast charging standards, there are implications on the on-board charger (OBC), which is one of the ESAs in a BEV. This paper performs a comprehensive review of identifying system-level and use-case related challenges in transitioning on-board chargers to higher voltages compared to state-of-the-art, while considering the impact of newly introduced DC fast charging standards like Megawatt Charging Systems (MCS) and ChaoJi/ CHAdeMO 3.0. The existing research in academia and proof-of-concept designs compatible for high-voltage on-board charging sub-systems, such as the power factor correction (PFC) and isolated DC-DC conversion stages is consolidated. Due to the demand for integration driven by cost-optimization targets, single-stage, traction-integrated, and auxiliary power unit (APU) integrated on-board chargers are discussed. Finally, the disparity between state-of-the-art technology and future requirements is defined to establish challenges and the direction of future research areas.

8 November 2023 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
GMGuvanthi Abeysinghe Mudiyanselage
Guvanthi Abeysinghe Mudiyanselage
NKNiloufar Keshmiri
Niloufar Keshmiri
AEAli Emadi
Ali Emadi
Resonant converters are attractive for DC-DC converter applications of electric vehicles (EVs) due to their wide range of soft switching and less output filter requirements compared to dual active bridge (DAB) converters. However, the design and control implementation of resonant converters is comparatively challenging due to the nonlinearities introduced with the resonant tank. LLC and CLLC resonant converters are popular among the resonant converter topologies, while new topologies are being derived based on the basic resonant converter topologies. This paper conducts a review on the basic resonant converter topologies, modes of operation of the resonant converter, modeling and control techniques, and special design considerations for resonant converter design. Existing topologies and control techniques of resonant converters enabling the derivation of new converter topologies and control methodologies, are investigated.

12 September 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
NNNegar Noroozi
Negar Noroozi
APAmirreza Poorfakhraei
Amirreza Poorfakhraei
OZOmar Zayed
Omar Zayed
AEAhmed Elezab
Ahmed Elezab
NKNiloufar Keshmiri
Niloufar Keshmiri
AEAli Emadi
Ali Emadi
In this article, we propose an optimization approach targeting rms current minimization in a dual active bridge (DAB) converter controlled by triple-phase-shift modulation. The proposed technique overcomes the drawbacks in the existing optimization solutions, namely, the high complexity of the time-domain optimization and the low accuracy of the fundamental harmonic minimization. A finite-component harmonic model is employed in the optimization approach to calculate the current harmonic values in the converter. The total rms current is approximated as the summation of dominant harmonics using the harmonic model. A numerical assessment technique is also proposed in this research that guarantees the accuracy of the adopted harmonic model. The proposed method ensures that the harmonic approximation error is less than a certain level over the operating range. The converter's optimal parameters are calculated through a standard nonlinear optimization procedure. The results are verified in the PLECS simulation environment and experimentally validated on a $5{\rm{\ kW}}$ DAB converter. The prototype input and output voltage ranges are $600{\rm{\ V}} - 800{\rm{\ V}}$ and $200{\rm{\ V}} - 450{\rm{\ V}}$ , respectively.

2 November 2021 in IEEE Open Journal of the Industrial Electronics Society
Verified
Journal Article
Open access
MHMohamed I. Hassan
Mohamed I. Hassan
NKNiloufar Keshmiri
Niloufar Keshmiri
ACAlan Dorneles Callegaro
Alan Dorneles Callegaro
MCMario F. Cruz
Mario F. Cruz
Mehdi NarimaniMehdi Narimani
Mehdi Narimani
AEAli Emadi
Ali Emadi
Isolated DC-DC converters are considered the building blocks of modern aircraft electrical power networks. The high-frequency transformer utilized in such converters is the major contributor to the size and weight besides the thermal management system. In this paper, an optimization design methodology aims to minimize the transformer core size and improve the converter performance through optimized winding configurations. The transformer core selection is based on optimizing the maximum flux density while considering different magnetic materials and number of cores in parallel. The transformer core is selected for an interleaved winding configuration and to keep the windings current density below a certain limit. The trade-offs between the converter efficiency and core weight in selecting an optimum switching frequency are presented. Multi-layer minimum gradient (MLMG) winding configurations are proposed to eliminate the high-frequency oscillations (HFO) caused by the transformer parasitics. The proposed configurations resulted in a reduction of the intra-winding capacitance by 15 times with 20 $\%$ improvement in the transformer volume as compared to a similar conventional double-layers spiral configurations. Numerical simulations are performed in ANSYS Maxwell to validate the proposed design and the developed analytical models. The effect of the different configurations on the converter performance is verified in the PLECS simulation environment. PLECS simulation results are validated experimentally for the conventional and proposed configurations highlighting the improvements on the performance of the converter.

9 February 2021 in IEEE Open Journal of the Industrial Electronics Society
Verified
Journal Article
Open access
NKNiloufar Keshmiri
Niloufar Keshmiri
MHMohamed Ibrahim Hassan
Mohamed Ibrahim Hassan
RRRomina Rodriguez
Romina Rodriguez
AEAli Emadi
Ali Emadi
With the aim towards lighter and more efficient electrical systems in future aircraft, design of DC/DC converters with high efficiency, power density and improved thermal management becomes necessary. This paper investigates the detailed design of isolated bidirectional DC/DC converters for more electric aircraft (MEA). Use of wide bandgap (WBG) devices to enhance system efficiency is considered. A transformer optimization technique based on switching frequency for different converter topologies is investigated. The control strategy of the discussed configurations are verified in the PLECS simulation environment. Dual active bridge (DAB), input-series output-parallel (ISOP), neutral point clamped (NPC) and active neutral point clamped (ANPC) converters are considered to exploit benefits offered by WBG devices for MEA. A comparison is performed in terms of efficiency, thermal management, power density and electromagnetic interference (EMI). The results indicate that the ANPC converter is better for efficiency, thermal management and power density. The DAB converter showed similar results to the ISOP with the DAB yielding higher efficiency. The NPC and ANPC configurations resulted in the best EMI performance. The NPC converter proved to be the least effective solution with regard to efficiency, thermal management and power density.