In this paper, a guided wave tomography method based on full waveform inversion (FWI) is developed for accurate and high-resolution reconstruction of the remaining wall thickness in isotropic plates. The forward model is computed in the frequency domain by solving a full-wave equation in a two-dimensional (2-D) acoustic model, accounting for higher order effects such as diffractions and multiple scattering. Both numerical simulations and experiments were carried out to obtain the signals of a dispersive guided mode propagating through defects. The inversion was based on local optimization of a waveform misfit function between modeled and measured data, and was applied iteratively to discrete frequency components from low to high frequencies. The resulting wave velocity maps were then converted to thickness maps by the dispersion characteristics of selected guided modes. The results suggest that the FWI method is capable to reconstruct the thickness map of a irregularly shaped defect accurately on a 10-mm-thick plate with the thickness error within 0.5 mm.
9 January 2023 in Mechanical Systems and Signal Processing
Focusing of ultrasonic waves in water plays an important role in various scenarios ranging from biomedical imaging to nondestructive testing. Acoustic metasurfaces have been largely explored for acoustic focusing, but they are generally narrowband and mainly implemented for airborne sound because of their structural complexity. Nevertheless, our previous development of metasurfaces provides a great opportunity to solve the challenges. Here, we present numerically and experimentally the broadband focusing of ultrasonic waves in water with a metasurface lens consisting of an array of deep-subwavelength sized and spaced slots. The slot widths of the metasurface are optimized based on microscopic coupled-wave theory. Due to the non-resonant arrangement, the focusing effect is demonstrated over a broad band of frequencies. The metasurface lens with simplicity and an ultra-compact size provides a feasible means for the design of thin and lightweight ultrasonic devices and is suitable for practical applications in biomedical and industrial fields.