Hydroxyapatite (HAP) is the main mineral component of bones and teeth. It is widely used in medicine as a bone filler and coating for implants to promote new bone growth. Ion substitutions into the HAP structure highly affect its properties. One of the most important substituents is magnesium. This paper presents new results obtained using high-precision hybrid density functional theory calculations for Mg/Ca substitutions in HAP in a wide magnesium concentration range within a 2 × 2 × 2 supercell model. Experimental data on the mechanochemical synthesis of HAP-Mg samples with different Mg concentrations are also presented. A comparison between the experiment and the theory showed good agreement: the HAP-Mg unit cell parameters and volume decreased with increasing degree of Mg/Ca substitution. The changes in the distances between the Ca and O, Ca and H, and Mg and O ions upon Mg/Ca substitution in different calcium positions was analyzed. The resulting asymmetry and distortion of the cell parameters were evaluated. It was shown that bulk modulus, energy levels, and band gap depend on the degree of Mg substitutions in the Ca1 and Ca2 positions. The formation energies of Mg/Ca substitutions showed non-monotonic behavior that was different for Ca1 and Ca2 positions. The Ca2 position had a slightly higher probability (~5 meV/f.u.) of substitution than Ca1 position at a Mg concentration x = 0.5. At x = 1, substitution in both positions can coexist. The simulated IR spectra for different Mg/Ca substitutions showed that Mg in the Ca2 position changes the IR spectrum more significantly than Mg in the Ca1 position. Similar changes were recorded in the IR spectra of the synthesized samples. The electronic structure is shown to be sensitive to the number and position of substitutions, which may be used to tweak the optical properties of the HAP-Mg material.

The doping of hydroxyapatite with various substituent ions can give this material new and useful properties. Nonetheless, local distortions of structure after doping can change the properties of the material. In this work, the thermal stability of copper-substituted hydroxyapatite synthesized by the mechanochemical method was investigated. In situ diffraction analyses showed that copper ion diffusion during the heating of Cu-substituted hydroxyapatite promotes phase transformations in the substituted hydroxyapatite. The behavior of copper ions was studied in samples with ratios (Ca + Cu)/P = 1.75 and 1.67. It was found that in both cases, single-phase Cu-substituted hydroxyapatite with the general formula Ca_10−xCu_x(PO₄)_6−y(CO₃)_y(OH)_2−yO_y is formed by the mechanochemical synthesis. When heated at approximately 600–700 °C, the lattice loses copper cations, but at higher temperatures, CuO diffusion into the hydroxyl channel takes place. Cuprate-substituted hydroxyapatite with the general formula Ca₁₀(PO₄)₆(OH)_2−2x(CuO₂)_x forms in this context. At 1200 °C, the sample is single-phase at (Ca + Cu)/P = 1.75. Nonetheless, slow cooling of the material leads to the emergence of a CuO phase, as in the case of (Ca + Cu)/P = 1.67, where the material contains not only CuO but also Cu-substituted tricalcium phosphate. In the manufacture of ceramic products from Cu-substituted hydroxyapatite, these structural transformations must be taken into account, as they alter not only thermal but also biological properties of such materials.

Magnesium, as one of the most abundant cations in the human body, plays an important role in both physiological and pathological processes. In this study, it was shown that a promising biomedical material, Mg-substituted hydroxyapatite (Mg-HA), can be synthesized via a fast mechanochemical method. For this method, the nature of magnesium-containing carriers was shown to be important. When using magnesium oxide as a source of magnesium, the partial insertion of magnesium cations into the apatite structure occurs. In contrast, when magnesium hydroxide or monomagnesium phosphate is used, single-phase Mg-HA is formed. Both experimental and theoretical investigations showed that an increase in the Mg content leads to a decrease in the lattice parameters and unit cell volume of Mg-HA. Density functional theory calculations showed the high sensitivity of the lattice parameters to the crystallographic position of the calcium site substituted by magnesium. It was shown experimentally that the insertion of magnesium cations decreases the thermal stability of hydroxyapatite. The thermal decomposition of Mg-HA leads to the formation of a mixture of stoichiometric HA, magnesium oxide, and Mg-substituted tricalcium phosphate phases.

The feasibility of soft mechanochemical synthesis was studied here for hydroxyapatite with various types of substitution. It was shown that this method allows obtaining hydroxyapatites substituted with copper or iron cations and hydroxyapatites cosubstituted with zinc cations and silicate groups. Thermal stability of the synthesized samples was evaluated. It was found that to preserve phase homogeneity of the material, the temperature during the preparation of ceramic products and coatings should not exceed 600–800 °C. An exception is the hydroxyapatite where a hydroxyl group is expected to be replaced by a copper cation during the synthesis at a degree of substitution x = 0.5. For this sample, the temperature of the the heat treatment can be increased to 1100–1200 °C because copper cations return to the hydroxyapatite crystal lattice at these temperatures, and the material becomes single-phase.

In this paper, we present results of a study on the possibilities of the mechanochemical synthesis of copper-substituted hydroxyapatite with the replacement of calcium cations by copper cations. During the synthesis, various reagents—sources of copper cations—were used. It was found that the nature of the carrier of the doping cation plays an important role in the formation of the structure of Cu-substituted apatite. It was established that a single-phase material forms most efficiently when copper (II) phosphate is employed; however, even this reagent did not allow the introduction of a large amount of copper into the hydroxyapatite crystal lattice. Out of 10 calcium cations in the unit cell of hydroxyapatite, no more than two could be replaced by copper cations. A further increase in the copper concentration led to the formation of an amorphous product. The degree of copper substitution in hydroxyapatite increases as the oxidation state of copper increases. The thermal stability of the hydroxyapatite with the highest degree of substitution was studied. It was shown that the presence of copper cations significantly decreases the stability of hydroxyapatite. In a temperature range of 550–750 °C, it is gradually decomposed to form a mixture of rhombohedral Ca_2.57Cu_0.43(PO₄)₂ and CuO. The FTIR spectrum of Ca_2.57Cu_0.43(PO₄)₂, which is a copper-substituted β-Ca₃(PO₄)₂, was first studied.