Christin Stallmeister

Ms. Christin Stallmeister

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2023 in Metals
Verified
Journal Article
Open access
PDF file
CSChristin Stallmeister
Christin Stallmeister
Bernd FriedrichBernd Friedrich
Bernd Friedrich
The thermal treatment of lithium-ion batteries is an already industrially implemented process step in some recycling chains. It provides the advantages of controlled organic removal and conditioning of the black mass for further process steps, such as water-based early-stage lithium recovery. Therefore, a deep understanding of ongoing reactions and the influence of the process parameters on the reaction products is crucial. This study investigates the inert thermal treatment of an industrial end-of-life NMC 622 battery shredder in a 200 g scale regarding the influence of process parameters on the reaction products, separation of black mass, and its water leaching. Therefore, the off-gas produced during the thermal treatment was analyzed by FTIR, and afterwards, a sieve classification of the shredder was carried out. The separated black mass was further analyzed for residual organics by pyrolysis GC-MS and for its phase composition by XRD. A water leaching of the different thermally treated black masses was carried out for Li recovery. Occurring reactions during the thermal treatment process, such as the different stages of organic removal and reduction reactions in the active material, were derived based on the collected data. These reactions mainly affect the water-based Li recovery, which is related to Li2CO3 generation. The maximum pyrolysis temperature has the greatest effect on the Li recovery. After a treatment at 642 °C, 62.4% of Li was leached. Reactions of the co-elements F, P and Al with Li during the thermal treatment were identified as the limiting factors regarding Li recovery.

15 August 2024 in Minerals Engineering
Verified
Journal Article
Open access
HQHao Qiu
Hao Qiu
HLHaojie Li
Haojie Li
MFMichael Fischlschweiger
Michael Fischlschweiger
MRMarko Ranneberg
Marko Ranneberg
TGTorsten Graupner
Torsten Graupner
DGDaniel Goldmann
Daniel Goldmann

28 February 2022 in Minerals
Verified
Journal Article
Open access
PDF file
TSThomas Schirmer
Thomas Schirmer
HQHao Qiu
Hao Qiu
DGDaniel Goldmann
Daniel Goldmann
CSChristin Stallmeister
Christin Stallmeister
Bernd FriedrichBernd Friedrich
Bernd Friedrich
In the future, it will become increasingly important to recover critical elements from waste materials. For many of these elements, purely mechanical processing is not efficient enough. An already established method is pyrometallurgical processing, with which many of the technologically important elements, such as Cu or Co, can be recovered in the metal phase. Ignoble elements, such as Li, are known to be found in the slag. Even relatively base or highly redox-sensitive elements, such as Zr, REEs, or Ta, can be expected to accumulate in the slag. In this manuscript, the methods for determining the phase formation and the incorporation of these elements were developed and optimized, and the obtained results are discussed. For this purpose, oxide slags were synthesized with Al, Si, Ca, and the additives, P and Ti. To this synthetic slag were added the elements, Zr and La (which can be considered proxies for the light REEs), as well as Ta. On the basis of the obtained results, it can be concluded that Ti or P can have strong influences on the phase formation. In the presence of Ti, La, and Ta, predominantly scavenged by perovskite (Ca1−wLa2/3wTi1−(x+y+z)Al4/3xZryTa4/5zO3), and Zr predominantly as zirconate (Ca1−wLa2/3wZr4−(x+y+z)Al4/3xTiyTa4/5zO9), with the P having no effect on this behavior. Without Ti, the Zr and Ta are incorporated into the pyrochlore (La2−xCa3/2x−yZr2+2/4y−zTa4/5zO7), regardless of the presence of phosphorus. In addition to pyrochlore, La accumulates primarily in britholite-type La oxy- or phosphosilicates. Without P and Ti, similar behavior is observed, except that the britholite-like La silicates do not contain P, and the scavenging of La is less efficient. Lithium, on the other hand, forms its own compounds, such as LiAlO2(Si), LiAl5O8, eucryptite, and Li silicate. Additionally, in the presence of P, Li3PO4 is formed, and the eucryptite incorporates P, which indicates an additional P-rich eutectic melt.

6 May 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
HQHao Qiu
Hao Qiu
DGDaniel Goldmann
Daniel Goldmann
CSChristin Stallmeister
Christin Stallmeister
Bernd FriedrichBernd Friedrich
Bernd Friedrich
MTMaximilian Tobaben
Maximilian Tobaben
Urs PeukerUrs Peuker
Urs Peuker
Among the technologies used for spent lithium-ion battery recycling, the common approaches include mechanical treatment, pyrometallurgical processing and hydrometallurgical processing. These technologies do not stand alone in a complete recycling process but are combined. The constant changes in battery materials and battery design make it a challenge for the existing recycling processes, and the need to design efficient and robust recycling processes for current and future battery materials has become a critical issue today. Therefore, this paper simplifies the current treatment technologies into three recycling routes, namely, the hot pyrometallurgical route, warm mechanical route and cold mechanical route. By using the same feedstock, the three routes are compared based on the recovery rate of the six elements (Al, Cu, C, Li, Co and Ni). The three different recycling routes represent specific application scenarios, each with their own advantages and disadvantages. In the hot pyrometallurgical route, the recovery of Co is over 98%, and the recovery of Ni is over 99%. In the warm mechanical route, the recovery of Li can reach 63%, and the recovery of graphite is 75%. In the cold mechanical route, the recovery of Cu can reach 75%, and the recovery of Al is 87%. As the chemical compositions of battery materials and various doping elements continue to change today, these three recycling routes could be combined in some way to improve the overall recycling efficiency of batteries.

27 February 2025 in Journal of Environmental Management
Verified
Journal Article
Open access
CSChristin Stallmeister
Christin Stallmeister
NMNiklas Mehl
Niklas Mehl
BFBernd Friedrich
Bernd Friedrich
Thermal pre-treatment has been proven to be a relevant process step in lithium-ion battery recycling. The organic removal and phase transformations are beneficial for subsequent process steps. Recently, the innovative concept of microwave heating has been introduced as an alternative for conventional processes taking the example of black mass and artificial mixtures. This study investigates the transferability of the concept to an industrial NMC 622 (LiNi0.6Mn0.2Co0.2O2) battery shredder, including foils and separator for the first time. The influence of treatment time, power and atmosphere are investigated and finally a scale-up is carried out. For all parameters, the influence on the resulting products off-gas and active mass and the subsequent mechanical treatment and water-based lithium recovery is investigated and compared to a conventional pyrolysis process. The gas analysis showed the enhanced decomposition of organics to shorter molecules compared to conventional heating and a successful organic removal. After a microwave treatment at 6 kW for 14 min, a mass loss of 14.7 % compared to 12 % in conventional pyrolysis at ∼550 °C was achieved and the delamination of the collector foils was improved. Furthermore, the reduction degree of NMC is similar. Accordingly, the lithium recovery shows nearly equal results of 54.2 % (conventional) and 55.5 % (microwave). The microwave process can therefore achieve the same product quality as a conventional treatment and is highly efficient with a timesaving of ∼88 %. Consequently, the study pooves the feasibility of a microwave treatment for complex battery shredder material.

10 May 2023 in Metals
Verified
Journal Article
Open access
PDF file
CSChristin Stallmeister
Christin Stallmeister
Bernd FriedrichBernd Friedrich
Bernd Friedrich
The recycling of lithium-ion batteries (LIBs) is becoming increasingly important regarding the expansion of electromobility and aspects of raw material supply. Pre-treatment and liberation are crucial for a sufficient recovery of all relevant materials from LIBs. Organic removal and phase transformations by thermal pre-treatment are beneficial in many respects. This study deals with the influence of flow-gas composition on reaction products and water-based lithium recovery after thermal treatment. Therefore, a spent NMC black mass was thermally treated at 610 °C in a moved bed batch reactor under an N2 atmosphere and mixtures of N2 with 2.5% and 5% O2. Since the phase transformation of the lithium content to Li2CO3 is targeted for water leaching, a treatment under a CO2 atmosphere was studied as well. The resulting off-gas was analyzed by FTIR, and the black mass was characterized by XRD. Afterward, water washing of the black mass was carried out for selective lithium recovery. The gained lithium product was analyzed for the purity and phases present. The addition of O2 resulted in reduced reduction reactions of lithium metal oxides and lower Li-yields in the water leaching compared to the other two atmospheres. In the case of CO2, the formation of Li2CO3 is favored compared to LiF, but the Li-yield of 56% is comparable to N2 treatment.