Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorisation to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South African CFA was subjected to wet, magnetic separation and subsequent zeolitisation of the nonmagnetic fraction (NMF); solid products were characterised by XRD, SEM, XRF and LA-ICP-MS. The wet, magnetic separation process resulted in the partitioning of a specific set of transition metals (such as Fe, Mn, Cr, V, Ni, Zn, Cu, Co and Mo) into the magnetic fraction (MF) of CFA, while REEs partitioned into the NMF with a total REE content of 530.2 ppm; thus, the matrix elements of CFA were extracted with ease. Zeolitisation resulted in a solid zeolite product (hydroxysodalite) with a total REE content of 537.6 ppm. The process of zeolitisation also resulted in the selective enrichment of Ce (259.1 ppm) into the solid zeolite product (hydroxysodalite), while other REEs were largely partitioned into the liquid phase. CFA valorisation by wet, magnetic separation and zeolitisation therefore allowed for the partitioning of REEs into various extraction products while recovering the matrix elements of CFA such as Fe, Si and Al. The findings of this study highlight the geopolitical importance of REEs in terms of the development of alternative processes for REE recovery from waste and alternative sources, which may potentially give countries that employ and develop the technology a key advantage in the production of REEs for the global market.
Malaria remains a significant global health burden, particularly in Sub-Saharan Africa, where drug resistance necessitates novel therapeutic strategies. This study evaluates the antiplasmodial potential of green-synthesized magnesium oxide (MgO) and zirconium oxide (ZrO2) nanoparticles and their composite (Mg/ZrO2) using Eucalyptus camaldulensis leaf extract. MgO, ZrO2, and MgO/ZrO2 nanoparticles were synthesized and characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), revealing crystalline structures with particle sizes ranging from 39 to 60 nm. Acute toxicity assessment in mice indicated an LD50 > 2000 mg/kg bodyweight, confirming their safety. In vivo antiplasmodial activity was assessed using Plasmodium berghei-infected mice, with treatment groups receiving 50, 100, and 200 mg/kg bodyweight each of the nanoparticles. In the suppressive test, MgO-NPs, ZrO2-NPs, and MgO/ZrO2-NPs exhibited dose-dependent parasite inhibition of 66.79%, 34.72%, and 41.02% respectively at 200 mg/kg bodyweight. The curative test further confirmed parasite clearance, with MgO-NPs demonstrating the highest efficacy. Nanoparticle treatment also improved survival time and maintained body weight compared to untreated controls. The observed antiplasmodial effects is attributed to enhanced cellular uptake, reactive oxygen species (ROS) generation, and disruption of parasite metabolic pathways. These findings highlight the potential of MgO, ZrO₂ and MgO/ZrO2 nanocomposites as promising candidates for antimalarial drug development, warranting further mechanistic studies and preclinical validation.
Stable HBEA zeolite with high surface area and strong acid sites was synthesized from coal fly ash–based silica extract via indirect hydrothermal synthesis. The rapid HBEA hydrothermal crystallization times of 8, 10, and 12 h were achieved through a reduced molar water fraction in the synthesis composition. The HBEA zeolites prepared from fly ash silica extract exhibited well-defined spheroidal-shaped crystal morphology with uniform particle sizes of 192, 190, or 239 nm obtained after 8, 10, or 12 h of synthesis time, respectively. The high surface area and the microporous area of 702 and 722 m2/g were achieved as a function of shorter hydrothermal synthesis durations (10 and 24 h, respectively) compared to 48 or 72 h, which resulted in HBEA zeolites with lower surface areas of 538 and 670 m2/g. Likewise, temperature-programmed desorption measurements of fly ash–based HBEA zeolites revealed the presence of weak and strong acid sites in the zeolite. The submicron crystal sizes with a well-defined porosity of HBEA zeolites enhanced the diffusion of anisole and benzoyl chloride molecules toward the active acid sites and hence showed better conversion and selectivity in acylation products. High conversion of benzoyl chloride with anisole was achieved, reaching up to 83% with a 93–96% selectivity toward 4-methoxyacetophenone.
31 May 2026 in Microporous and Mesoporous Materials