The need for rare earths elements (REEs) in high tech electrical and electronic based materials are vital. In the global economy, deposits of natural REEs are limited except for countries such as China, which has prompted current attempts to seek alternative resources of REEs. This increased the dependence on major secondary rare earth-bearing sources such as scrap alloy, battery waste, spent catalysts, fly ash, spent magnets, waste light-emitting diodes (LEDs), and phosphogypsum (PG) for a substantial recovery of REEs for use. Recycling of REEs from these alternative waste sources through hydrometallurgical processes is becoming a sustainable and viable approach due to the low energy consumption, low waste generation, few emissions, environmentally friendliness, and economically feasibility. Industrial wastes such as the PG generated from the production of phosphoric acid is a potential secondary resource of REEs that contains a total REE concentration of over 2000 mg/kg depending upon the phosphate ore from which it is generated. Due to trace concentration of REEs in the PG (normally < 0.1% wt.) and their tiny and complex occurrence as mineral phases the recovery process of REE from PG would be highly challenging in both technology and economy. Various physicochemical pre-treatments approaches have been used up to date to up-concentrate REEs from PG prior to their extraction. Methods such as carbonation, roasting, microwave heating, grinding or recrystallization have been widely used for this purpose. This present paper reviews recent literature on various techniques that are currently employed to up-concentrate REs from PG to provide preliminary insight into further critical raw materials recovery. In addition, the advantages and disadvantages of the different strategies are discussed as avenues for realization of REE recovery from PG at a larger scale. In all the different approaches, recrystallization of PG appears to show promising advantages due to both high REE recovery as well as the pure PG phase that can be obtained.
The lack of economically viable and environmentally friendly recycling processes to recover valuable metals from spent lithium-ion batteries (LIBs) has resulted in an environmental pollution and a high risk of metal resource shortage. Among various approaches, adsorption using electrospun nanofiber adsorbents has attracted research interest due to several distinctive properties. This study synthesized electrospun polyethylene terephthalate (PET) nanofiber adsorbent which was functionalized with Di-2-ethylhexyl phosphoric acid (DEHPA) to recover Ni, Co, or Mn metal ions. The pristine and modified electrospun nanofibers were characterized using Fourier Transform Infrared spectroscopy (FTIR)-Attenuated Total Reflection (ATR), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetric Analysis (TGA), and X-ray Diffraction (XRD). The adsorption kinetics and capacity of the modified PET-DEHPA nanofibers were obtained at optimum pH 4; 60 min of contact time and 100 mg/L initial metal concentration. The adsorption capacity of PET-DEHPA nanofibers for Ni, Co and Mn metal ions was 80 mg/g, 98 mg/g, and 118 mg/g, respectively. The selectivity of Mn over Ni and Co metal ions was also examined at pH 4 and showed that the recovery efficiencies were 5%; 11% and 58% for Ni, Co and Mn, respectively. Thus, indicating that the modified PET-DEHPA nanofiber was selective for Mn ions. The desorption and regeneration were also studied in solutions of nitric acid and Ni, Co and Mn ions, and results showed that PET-DEHPA nanofiber was able to withstand over 5 cycles, highlighting its potential in economic viability and sustainability. Overall, this study presents a new and promising approach for recycling Mn ions from solutions of spent LIBs.