Haoyue Ji

Dr. Haoyue Ji


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
YWYongkun Wang
Yongkun Wang
LHLiu Haozheng
Liu Haozheng
LHLinghua Huo
Linghua Huo
HLHaobin Li
Haobin Li
WTWenchao Tian
Wenchao Tian
Si ChenSi Chen
Si Chen
With the advancement of Moore’s Law reaching its limits, advanced packaging technologies represented by Flip Chip (FC), Wafer-Level Packaging (WLP), System in Package (SiP), and 3D packaging have received significant attention. While advanced packaging has made breakthroughs in achieving high performance, miniaturization, and low cost, the smaller thermal space and higher power density have created complex physical fields such as electricity, heat, and stress. The packaging interconnects responsible for electrical transmission are prone to serious reliability issues, leading to the device’s failure. Therefore, conducting multi-field coupling research on the reliability of advanced packaging interconnects is necessary. The development of packaging and the characteristics of advanced packaging are reviewed. The reliability issues of advanced packaging under thermal, electrical, and electromagnetic fields are discussed, as well as the methods and current research of multi-field coupling in advanced packaging. Finally, the prospect of the multi-field coupling reliability of advanced packaging is summarized to provide references for the reliability research of advanced packaging.

13 February 2025 in Micromachines
Verified
Journal Article
Open access
PDF file
WTWenchao Tian
Wenchao Tian
FLFeiyang Li
Feiyang Li
MHMang He
Mang He
HJHaoyue Ji
Haoyue Ji
Si ChenSi Chen
Si Chen
This paper examined the reliability of complex PCB assemblies under random vibration and temperature cycling, which are two primary causes of assembly failure. A combination of finite element simulation and environmental testing was employed to investigate the effects of different reinforcement methods and solder joint morphology on assembly reliability. The linear accumulation of damage was utilized to predict assembly failure, and the predicted failure damage was compared with the damage extracted post-testing to validate the simulation analysis. The results indicate that SAC305 solder exhibits greater strength than Sn63Pb37 solder in withstanding temperature cycling fatigue, yet is weaker than Sn63Pb37 solder in withstanding random vibration fatigue. When the solder is Sn63Pb37, the temperature cycling life of the assembly with the bottom filled and the corners fixed is reduced by 92.3% and 99.3%, respectively, compared to the unreinforced method, while the random vibration life is enhanced by 84 times and 3.9 times, respectively. An increase in pad diameter is advantageous for improving the random vibration life of the assembly, but results in a decrease in the temperature cycling life. When the lower pad diameter ranges from 0.35 mm to 0.55 mm, the assembly temperature cycling life decreases by 28.83%, 82.03%, 90.66%, and 91.22% with the increase of the lower pad diameter, and the random vibration life improves by 4.8 times, 9.5 times, 20.4 times, and 33.6 times, respectively. The predicted locations of vulnerable solder joints for the assembly are consistent with the experimental results, and the failure prediction accuracy of the assembly is 88.89%.

15 June 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
WTWenchao Tian
Wenchao Tian
GRgao ran
gao ran
LGLin Gu
Lin Gu
HJHaoyue Ji
Haoyue Ji
LZLiming Zhou
Liming Zhou
To meet the demands for miniaturization and multi-functional and high-performance electronics applications, the semiconductor industry has shifted its packaging approach to multi-chip vertical stacking. Among the advanced packaging technologies for high-density interconnects, the most persistent factor affecting their reliability is the electromigration (EM) problem on the micro-bump. The operating temperature and the operating current density are the main factors affecting the EM phenomenon. Therefore, when a micro-bump structure is in the electrothermal environment, the EM failure mechanism of the high-density integrated packaging structure must be studied. To investigate the relationship between loading conditions and EM failure time in micro-bump structures, this study established an equivalent model of the vertical stacking structure of fan-out wafer-level packages. Then, the electrothermal interaction theory was used to carry out numerical simulations in an electrothermal environment. Finally, the MTTF equation was invoked, with Sn63Pb37 as the bump material, and the relationship between the operating environment and EM lifetime was investigated. The results showed that the current aggregation was the location where the bump structure was most susceptible to EM failure. The accelerating effect of the temperature on the EM failure time was more obvious at a current density of 3.5 A/cm2, which was 27.51% shorter than 4.5 A/cm2 at the same temperature difference. When the current density exceeded 4.5 A/cm2, the change in the failure time was not obvious, and the maximum critical value of the micro-bump failure was 4 A/cm2~4.5 A/cm2.

30 June 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
HJHaoyue Ji
Haoyue Ji
WTWenchao Tian
Wenchao Tian
HQHongwen Qian
Hongwen Qian
XSXiaodong Sun
Xiaodong Sun
YWYongkun Wang
Yongkun Wang
LZLihua Zheng
Lihua Zheng
In advanced packaging technology, the micro bump has become an important means of chip stacking and wafer interconnection. The reliability of micro bumps, which plays an important role in mechanical support, electrical connection, signal transmission and heat dissipation, determines the quality of chip packaging. Surface morphological defects are one of the main factors affecting the reliability of micro bumps, which are closely related to materials and bonding process parameters. In this paper, the electrodeposition process of preparing gold bumps is simulated at the atomic scale using the Kinetic Monte Carlo method. The differences in surface morphology and roughness of the plated layer are studied from a microscopic perspective under different deposition parameters. The results show that the gold micro bumps prepared by electrodeposition have better surface quality under conditions of lower deposition voltage, lower ion concentration and higher plating temperature, which can provide significant guidance for engineering applications.

9 April 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
HJHaoyue Ji
Haoyue Ji
LZLiang Zeng
Liang Zeng
HQHongwen Qian
Hongwen Qian
WTWenchao Tian
Wenchao Tian
JLJingjing Lin
Jingjing Lin
YDYuhe Duan
Yuhe Duan
To meet the demands for miniaturization, lightweight design, and high performance in modern electronic systems, advanced 3D TSV technology enables a substantial increase in storage capacity even within physically constrained form factors. This paper proposes a schematic design methodology and system-level integrated modeling approach for a four-layer stacked micro-module based on wafer-level packaging. By leveraging heterogeneous chip fan-out technology and TSV-based vertical stacking, the fabricated DDR3 micro-module achieves a compact footprint of 14 × 9 × 3.5 mm, a storage capacity of 4 GB, and a 64-bit bus width. Compared to conventional board-level mounting, the module reduces the footprint area by 95%. Following comprehensive multi-level testing, the micro-module fully complies with standard protocol requirements, enabling a paradigm shift in form factors for mobile computing devices while enhancing computational density and energy efficiency in data center server applications.

20 July 2025 in Micromachines
Verified
Journal Article
Open access
PDF file
WTWenchao Tian
Wenchao Tian
PZPengchao Zhang
Pengchao Zhang
MTMingfang Tian
Mingfang Tian
Si ChenSi Chen
Si Chen
HJHaoyue Ji
Haoyue Ji
BMBingxu Ma
Bingxu Ma
Packaging equipment plays a crucial role in the semiconductor industry by enhancing product quality and reducing labor costs through automation. Research was conducted on IGBT module packaging equipment (an automatic pin insertion machine) during the pin assembly process of insulated gate bipolar transistor (IGBT) modules to improve productivity and product quality. First, the manual pin assembly process was divided into four stages: feeding, stabilizing, clamping, and inserting. Each stage was completed by separate cams, and corresponding step timing diagrams are drawn. The profiles of the four cams were designed and verified through theoretical calculations and kinematic simulations using a seventh-degree polynomial curve fitting method. Then, image algorithms were developed to detect pin tilt defects, pin tip defects, and to provide visual guidance for pin insertion. Finally, a pin insertion machine and its human–machine interaction interface were constructed. On-machine results show that the pin cutting pass rate reached 97%, the average insertion time for one pin was 2.84 s, the pass rate for pin insertion reached 99.75%, and the pin image guidance accuracy was 0.02 mm. Therefore, the designed pin assembly machine can reliably and consistently perform the pin insertion task, providing theoretical and experimental insights for the automated production of IGBT modules.