Cohesive sediment deposits in the Three Gorges Reservoir, China, were used to investigate physical and geochemical properties, biofilm mass, and erosion and deposition characteristics. Biofilm cultivation was performed in a recirculating flume for three different periods (5, 10 and 15 days) under ambient temperature and with sufficient nutrients supply. Three groups of size-fractionated sediment were sequentially used, including 0–0.02 mm, 0.02–0.05 mm and 0.05–0.10 mm. Desired conditions for erosion and deposition were designed by managing high bed shear stress at the narrow part of upstream flume and low shear stress at the wide part of downstream flume. Biostabilization and transport characteristics of the biofilm coated sediment (bio-sediment) were strongly influenced by the cultivation period, and the results were compared with clean sediment. The bio-sediment was more resistant to erosion, and the mean shear stress was increased by factors of 2.65, 2.73 and 5.01 for sediment with 5, 10 and 15 days of biofilm growth compared with clean sediment, resulting in less sediment being eroded from the bed. Simultaneously, the settling velocity was smaller for bio-sediment due to higher organic content and porosity (i.e., lower density). Additionally, there was a smaller probability of deposition for sediment with a longer cultivation period after erosion, resulting in more retention time in aquatic systems. These results will benefit water management in natural rivers.
In this study, an analytical model for the transport of biofilm-coated sediment (bio-sediment) particles is developed. Experiments were conducted cultivating biofilm-coat around fine sediment particles (silt type) in an experimental flume for a specific period of time. The particle tracking velocimetry method was used to detect the saltation trajectory, the size of bio-flocs, and the flow velocity. A concentration meter was used to measure the concentrations of near-bed and suspended sediment transport. It was observed that the ratio of saltation length to saltation height for bio-flocs is greater than that for uncontaminated (without a biofilm-coat) sediment particles. The experimental data were used to calibrate the analytical model. A relationship for the bed-load transport rate of bio-sediments as a function of transport stage and particle parameters is proposed. Also, a formula for the reference concentration is given. Then, a computational scheme of bio-sediment transport (both bed-load and suspended-load transport) is furnished.
The bedforms on a biofilm-coated sediment (biosediment) bed are different from those on a noncohesive sediment bed under an identical flow condition and sediment particle size without biofilm. Bedforms on biosediment beds can therefore modify the resistance to flow. In this study, experiments were conducted for the bedforms on both cohesive and biosediment beds. The biofilm coat around the fine cohesive sediment particles of a median size less than 0.1 mm was cultivated within a laboratory flume. The bedforms on biosediment beds are identified as dunes by comparing the Froude number and the Shields parameter. The equations of bedform steepness, bedform height, and equivalent roughness for biosediment beds are empirically derived. The maximum variations of equivalent roughness, Chézy coefficient, and Manning coefficient for a biosediment bed are 96.7, 60.5, and 44.3%, respectively, as compared to those for a noncohesive sediment bed under an identical flow condition and sediment size without biofilm.
Standardized Runoff Index (SRI), as one of the well-known hydrological drought indices, may contain uncertainties caused by the employment of the distribution function, time scale, and record length of statistical data. In this study, the uncertainty in the SRI estimation of monthly discharge data of 30- and 49-year lengths from the Minab Dam watershed, south of Iran, was investigated. Four probability distribution functions (Gamma, Weibull, Lognormal, and Normal) were used to fit the cumulative discharge data at 3-, 6-. 9-, 12-, 24-, and 48-month time scales, with their goodness-of-fit and normality evaluated by K-S and normality tests, respectively. Using Monte Carlo sampling, 50,000 statistical data were generated for each event and each time scale, followed by 95% confidence interval. The width of the confidence interval was used as uncertainty, and sources of uncertainty were investigated using miscellaneous factors. It was found that the maximum uncertainty was related to Normal and Lognormal distributions and the minimum uncertainty to Gamma and Weibull distributions. Furthermore, the increase in both time scale and record length led to the decrease in uncertainty.