With the development of the engineering construction industry, knowledge became an important strategic resource for construction enterprises, and knowledge graphs are an effective method for knowledge management. In the context of peak carbon dioxide emissions and carbon neutrality, low carbon emission became one of the important indicators for the selection of construction schemes, and knowledge management research related to low carbon construction must be performed. This study investigated a method of incorporating low-carbon construction knowledge into the bridge construction scheme knowledge graph construction process and proposed a bridge construction scheme recommendation method that considers carbon emission constraints based on the knowledge graph and similarity calculation. First, to solve the problem of the poor fitting effect of model parameters caused by less annotation of the corpus in the bridge construction field, an improved entity recognition model was proposed for low-resource conditions with limited data. A knowledge graph of low carbon construction schemes for bridges was constructed using a small sample dataset. Then, based on the construction of this knowledge graph, the entities and relationships related to construction schemes were obtained, and the comprehensive similarity of bridge construction schemes was calculated by combining the similarity calculation principle to realize the recommendation of bridge construction schemes under different constraints. Experiments on the constructed bridge low carbon construction scheme dataset showed that the proposed model achieved good accuracy with named entity recognition tasks. The comparative analysis with the construction scheme of the project verified the validity of the proposed construction scheme considering carbon emission constraints, which can provide support for the decision of the low-carbon construction scheme of bridges.
The empirical formula is one of the traditional methods used for predicting ground deformation settlement caused by tunnel excavation. Due to its rationality and simplicity, the Peck formula is widely used for predicting surface subsidence. However, due to its limitations, it is necessary to modify it when predicting surface settlement caused by tunnel excavation in different strata. In this paper, a correction formula for the width coefficient of a tunnel surface settlement slot is derived from the Peck formula by taking into account the theory of strata slip cracks. Values are calculated using the correction formula and compared with measured data to verify the effectiveness of the correction formula. The main conclusions are: (1) The position corresponding to the width of the settlement in the Peck curve is the point where the formation is most prone to slip cracking. (2) In the general shallow buried case, the settlement groove width coefficient K and the internal friction angle φ of the ground satisfy the formula K = 1/tan(45° + φ/2 + a) + b, and the values of parameters a and b reflect the average values of the geometric properties of the tunnel based on the measured data. (3) The prediction of the correction formula is consistent with the measured data, and thus the correction formula can be applied to problems related to the stability of shallow buried tunnels.