Whereas poly-epoxy polymers represent a class of materials with a wide range of applications, the structural disorder makes them difficult to model. In the present work, we use good experimental model samples in the sense that they are pure, fully polymerized, flat and smooth, defect-free, and suitable for ultrahigh vacuum x-ray photoelectron spectroscopy, XPS, experiments. In parallel, we perform Hartree-Fock, HF, calculations of the binding energies, BEs, of the C1s electrons in a model molecule composed of the two constituents of the poly-epoxy sample. These C1s BEs were determined using the HF ΔSCF method, which is known to yield accurate values, especially for the shifts of the BEs, ΔBEs. We demonstrate the benefits of combining rigorous theory with careful XPS measurements in order to obtain correct assignments of the C1s XPS spectra of the polymer sample. Both the relative binding energies—by the ΔSCF method—and relative intensities—in the sudden approximation, SA, are calculated. It results in an excellent match with the experimental spectra. We are able to identify 9 different chemical environments under the C1s peak, where an exclusively experimental work would have found only 3 contributions. In addition, we observe that some contributions are localized at discrete binding energies, whereas others allow a much wider range because of the variation of their second neighbor bound polarization. Therefore, HF-ΔSCF simulations significantly increase the spectral resolution of XPS and thus offer a new avenue for the exploration of the surface of polymers.

The evolution of emerging technologies that use Radio Frequency Electromagnetic Field (RF-EMF) has increased the interest of the scientific community and society regarding the possible adverse effects on human health and the environment. This article provides NextGEM’s vision to assure safety for EU citizens when employing existing and future EMF-based telecommunication technologies. This is accomplished by generating relevant knowledge that ascertains appropriate prevention and control/actuation actions regarding RF-EMF exposure in residential, public, and occupational settings. Fulfilling this vision, NextGEM commits to the need for a healthy living and working environment under safe RF-EMF exposure conditions that can be trusted by people and be in line with the regulations and laws developed by public authorities. NextGEM provides a framework for generating health-relevant scientific knowledge and data on new scenarios of exposure to RF-EMF in multiple frequency bands and developing and validating tools for evidence-based risk assessment. Finally, NextGEM’s Innovation and Knowledge Hub (NIKH) will offer a standardized way for European regulatory authorities and the scientific community to store and assess project outcomes and provide access to findable, accessible, interoperable, and reusable (FAIR) data.

Polyepoxy samples are synthesized from diglycidylether of bisphenol A (DGEBA) and ethylene diamine (EDA) monomers at a stoichiometric ratio of 2 DGEBA : 1 EDA in model conditions in order to promote a high degree of polymerization and a low density of defects and to try to approach the ideal models obtained by simulation. A slow polymerization (>24 h at ambient temperature) and a postcuring achieved in an inert atmosphere lead to a conversion degree of 92±2% and a midpoint glass transition temperature of 391±1K. In parallel, a model is created with a multistep cross-linking procedure. In this work, all-atom molecular dynamics (MD) simulations are performed with LAMMPS and the GAFF 1.8 force field. In the initial liquid mixture of reactants (600 molecules), proper mixing is demonstrated by the calculation of the partial radial distribution functions (RDF), which show a minimum intermolecular distance of 2.8 Å and similar distributions for EDA-EDA, DGEBA-DGEBA, and DGEBA-EDA molecules in the simulation boxes. Then, in alternation with MD equilibrations, cross-linking is performed on frozen configurations by creating covalent bonds between reactive pairs within a reaction radius of 3 Å. The resulting boxes show conversion rates of 90-93% and densities close to the experimental value. Finally, a cooling ramp from 700 K to 25 K is applied in order to monitor the specific volume and the coefficient of volumetric thermal expansion (CVTE) of the polymer and to derive the glass transition temperature. Experimental thermomechanical analyses (TMA) compares well with simulations for both the specific volume and the CVTE evolutions with temperature. Whereas the uncertainty remains high with the fitting procedure used, we calculate a glass transition temperature of 390±8K which compares very well with the experimental values (391±1K from DSC and 380 K from TMA).

The convergence of vehicular communications, 5th generation mobile network (5G) technology, and edge computing marks a paradigm shift in intelligent transportation. Vehicular communication systems, including Vehicle-to-Vehicle and Vehicle-to-Infrastructure, are integral to Intelligent Transportation Systems. The advent of 5G enhances connectivity, while edge computing brings computational processes closer to data sources. This synergy holds the potential to revolutionize transportation efficiency and safety. This research investigates vehicular communication and edge computing dynamics within a 5G network, considering varying distances between On Board Units and Roadside Units. Energy consumption patterns and CPU load at the RSU are analyzed through meticulous real-world experiments and simulations. Our results show stable energy consumption at shorter distances, with fluctuations increasing at greater ranges. CPU load correlates with communication distance, highlighting the need for adaptive algorithms. While experiments exhibit higher variability, our simulations validate these findings, emphasizing the importance of considering transmission range in vehicular communication network design.