Ocean wave power generation techniques (converting wave energy into electrical energy) have been in use for many years. The objective of this paper is to review the design, control, efficiency, and safety of ocean wave power generation systems. Several topics are discussed: the current situation of ocean wave power generation system tests in real ocean waves; the optimization design of linear generator for converting ocean wave energy into electrical energy; some optimization control methods to improve the operational efficiency of ocean wave power generation systems; and the current policy and financial support of ocean wave power generation in some countries. Due to the harsh ocean environment, safety is another factor that ocean wave power generation systems will face. Therefore, before the conclusion of this review, a damping coefficient optimization control method based on the domain partition is proposed to improve the efficiency and safety of ocean wave power generation systems.
In this paper, an analytical method based on the series transform and skewed slot structure of rotor is adopted to reduce the cogging torque of the variable flux memory permanent magnet (VFMPM) machine. Firstly, the theory analysis of the cogging torque of the VFMPM machine was completed. Secondly, a simulation model of the VFMPM machine was established, aiming at calculating the cogging torque of the VFMPM machine and verifying the correctness of the above analytical method. Thirdly, a prototype of 14 rotor slots and 12 stator slots of the VFMPM machine was manufactured, and the experimental results of the cogging torque of the VFMPM machine further verified the effectiveness of the above mentioned theory analysis. Besides, the load force of the VFMPM machine including the cogging torque was also tested and analyzed in this paper.
Ocean wave height is one of the critical factors to decide the efficiency of the ocean wave energy conversion system. Usually, only when the resonate occurs between the ocean wave height (ocean wave speed in the vertical direction) and ocean wave energy conversion system, can the conversion efficiency from ocean wave energy into electric energy be maximized. Therefore, this paper proposes two predication methods to predict the future ocean wave height in 1.5–2.5 s. Firstly, the data fitting of real ocean wave height is achieved by the polynomial method, which is beneficial to the predication of ocean wave height. Secondly, the models of the moving average (MA) predication method and auto regressive (AR) predication method are presented by the time series analysis process. Lastly, after the predication of ocean wave height by the MA method and AR method, and compared with the data fitting result of real ocean wave height, it can be found that the AR method is more accurate for the predication of ocean wave height. In addition, the predication results also indicated that the error between the predication value and true value in the future 2.5 s is considered acceptable, which provides enough time to optimize the operation process of the ocean wave energy conversion system by a suitable control method.