Sarat Singamneni

Dr. Sarat Singamneni


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019
Verified
Journal Article
Open access
PDF file
SSSarat Singamneni
Sarat Singamneni
YLYifan Lv
Yifan Lv
AHAndrew Hewitt
Andrew Hewitt
RCRodger Chalk
Rodger Chalk
WTWayne Thomas
Wayne Thomas
DJDavid Jordison
David Jordison
Considering the stringent regulations, manufacturing of aircraft parts is often quite complex and time consuming. The multi-million components, multi-tier manufacturing systems and the severe constraints surrounding the sector lead to heavy inventory investments to achieve the just-in-time supply of parts often needed to reduce the airplane ground times. Additive manufacturing evolved allowing for the direct production of complex parts based on digital data with no complex tooling or machinery, a messiah of true just in time production. Appropriate integration of additive manufacturing with the aircraft industry could resolve some of the supply chain and inventory hurdles. Significant progress is already evident in these lines, but the lack of quality assurance attributes and certification standards is hampering the progress. The state-of-the-art of the application of additive manufacturing in the aircraft industry is reviewed in this paper. The supply chain configurations of the aircraft industry, the possible roles of additive manufacturing in relaxing the pressures in the system are evaluated. The application areas, enhanced attributes, and certification standards are critically reviewed and classified. The overall growth in the application of additive manufacturing in the aircraft industry, the main hurdles, and the future possibilities are evaluated and presented systematically, clearly portraying the developments.

29 April 2016 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
KDKarl Davidson
Karl Davidson
SSSarat Singamneni
Sarat Singamneni
Selective laser melting gained substantial momentum in the recent past and quite a few alloy systems have been researched and made available for commercial use; titanium, aluminum, stainless and tool steels, cobalt chrome, and Inconel being the most popular examples. Despite the application potential, and the successful processing of powder forms by traditional powder metallurgy methods, selective laser melting of duplex stainless steels was not attempted so far. The response of a duplex stainless steel alloy to processing by selective laser melting with varying process conditions is evaluated in the current research. Experimental results ascertained that the complete cycle starting from duplex powders, consolidating into 3D forms by selective laser melting and then post-process heat treatment to bring the microstructures back to duplex forms is feasible. Within the current experimental domain, the multi-layer samples are close to 90% density and showed a maximum dimensional variation of 2–3%, while the austenite to ferrite ratio is 45:55 after the post-process heat treatment.

10 January 2014 in Journal of Composite Materials
Verified
Journal Article
Closed access
BHBin Huang
Bin Huang
SSSarat Singamneni
Sarat Singamneni
Fused deposition modelling is one of the additive manufacturing processes in which a semi-solid polymer material is deposited line-by-line to construct 3D objects direct from computer aided design (CAD) models. Benefits inherent with additively manufacturing allowed effective competition with other traditional methods in specific applications and the process drew sufficient research attention. The nature of material deposition and the mechanics of solid state sintering lead to varying levels of inter-road and inter-layer bonding resulting in a composite structure of voids interspersed in the base material matrix. While there are other parameters also, the raster angle in particular has a direct bearing on the resulting meso-structure and together with the rate of inter-road coalescence plays a significant role in influencing the mechanical characteristics of parts produced. Experimental and analytical attempts were made in the past to evaluate the role of raster angle orientation, but the resulting material properties were taken to be those of the base material. The hypothesis for the current research is that the mechanical properties resulting from fused deposition modelling are structure-sensitive. Experimental and analytical models are developed to test this hypothesis and the results indicate the hypothesis to be true.

14 July 2017 in Materials
Verified
Journal Article
Open access
PDF file
AJArunkumar Jayakumar
Arunkumar Jayakumar
SSSarat Singamneni
Sarat Singamneni
MRMaximiano Ramos
Maximiano Ramos
AAAhmed Al_Jumaily
Ahmed Al_Jumaily
SSSundar Pethaiah Sethu
Sundar Pethaiah Sethu
The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and performance. In addition, it involves a complex manufacturing process to produce it. The proposed technique aims to resolve both these issues by an advanced 3D printing technique, namely selective laser sintering (SLS). In the proposed work, polyamide (PA) is used as the base powder and titanium metal powder is added at an optimised level to enhance the electrical conductivity, thermal, and mechanical properties. The application of selective laser sintering to fabricate a robust gas diffusion substrate for PEM fuel cell applications is quite novel and is attempted here for the first time.

17 August 2018 in Polymers
Verified
Journal Article
Open access
PDF file
SSSarat Singamneni
Sarat Singamneni
DSDawn A Smith
Dawn A Smith
MGMarie-Joo Le Guen
Marie-Joo Le Guen
DTDerryn Truong
Derryn Truong
Fused deposition modelling is a common 3D printing technique used for the freeform fabrication of complex shapes based on polymers. Acrylonitrile butadiene styrene (ABS) is the common material option, though polylactide (PLA) has also proved to be a successful candidate. There is an ever increasing demand to harness new materials as possible candidates for fused deposition. The current research is focused on evaluating polybutyrate-adipate-terephthalate–polymer (PBAT) for fused deposition modelling. Both neat and composite PBAT filled with varying wood flour fillers were experimentally analyzed for 3D printing by extrusion from the pellet forms. The results are positive and the addition of small quantities of the wood flour filler material was found to improve the thixotropic nature of the polymer composite and consequently the inter-strand and inter-layer coalescence.

17 October 2017 in Rapid Prototyping Journal
Verified
Journal Article
Closed access
KDKarl P. Davidson
Karl P. Davidson
SSSarat Singamneni
Sarat Singamneni
Purpose: This paper aims to establish the microstructures and the process-structure relationships in duplex stainless steel powders consolidated by selective laser melting (SLM). Design/methodology/approach: A priori data on energy density levels most appropriate to consolidation of duplex stainless steel powders through SLM served as the basis to converge on the laser settings. Experimental designs with varying laser power and scan speeds and test pieces generated allowed metallographic evaluations based on optical and scanning electron microscopy and electro backscatter diffraction analyses. Findings: Duplex stainless steel powders are established for processing by SLM. However, the dynamic point heat source and associated transient thermal fields affect the microstructures to be predominantly ferritic, with grains elongated in the build direction. Austenite precipitated either at the grain boundaries or as Widmanstätten laths, whereas the crystallographic orientations and the grain growth are affected around the cavities. Considerable CrN precipitation is also evidenced. Originality/value: Duplex stainless steels are relatively new candidates to be brought into the additive manufacturing realm. Considering the poor machinability and other difficulties, the overarching result indicating suitability of duplex powders by SLM is of considerable value to the industry. More significantly, the metallographic evaluation and results of the current research allowed further understanding of the material consolidation aspects and pave ways for fine tuning and establishment of the process-structure-property relationships for this important process-material combination.