The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and performance. In addition, it involves a complex manufacturing process to produce it. The proposed technique aims to resolve both these issues by an advanced 3D printing technique, namely selective laser sintering (SLS). In the proposed work, polyamide (PA) is used as the base powder and titanium metal powder is added at an optimised level to enhance the electrical conductivity, thermal, and mechanical properties. The application of selective laser sintering to fabricate a robust gas diffusion substrate for PEM fuel cell applications is quite novel and is attempted here for the first time.
The membrane electrode assembly (MEA) encompassing the polymer electrolyte membrane (PEM) and catalyst layers are the key components in Polymer Electrolyte Membrane Fuel Cells (PEMFCs). The cost of the PEMFC stacks has been limiting its commercialization due to the inflated price of conventional platinum (Pt)-based catalysts. As a consequence, the authors of this paper focus on developing novel bi-metallic (Pt-Co) nano-alloy-catalyzed MEAs using the non-equilibrium impregnation–reduction (NEIR) approach with an aim to reduce the Pt content, and hence, the cost. Herein, the MEAs are fabricated on a Nafion® membrane with a 0.4 mgPtcm−2 Pt:Co electrocatalyst loading at three atomic ratios, viz., 90:10, 70:30, and 50:50. The High Resolution-Scanning Electron Microscopic (HR-SEM) characterization of the MEAs show a favorable surface morphology with a uniform distribution of Pt-Co alloy particles with an average size of about 15–25 µm. Under standard fuel cell test conditions, an MEA with a 50:50 atomic ratio of Pt:Co exhibited a peak power density of 0.879 Wcm−2 for H2/O2 and 0.727 Wcm−2 for H2/air systems. The X-ray diffractometry (XRD), SEM, EDX, Cyclic Voltammetry (CV), impedance, and polarization studies validate that Pt:Co can be a potential affordable alternative to high-cost Pt. Additionally, a high degree of stability in the fuel cell performance was also demonstrated with Pt50:Co50.