This study determined the effect of introducing the NHSCN additive in the precursor solution of PbI of a sequential deposition method in an open atmosphere to form FAPbI perovskite over a glass substrate. Adding NHSCN leads to different intermediate layers according to the concentration of the additive. From an adequate concentration, an ionic substitution between I and SCN is promoted, providing a unique path for nucleation and growth of FAPbI due to significant changes in morphology. The intermediate layer with a proper amount of NHSCN enhanced the physical properties of FAPbI. It contributed to understanding the crystallinity and morphological conditions for favorable growth of FAPbI directly over a glass substrate. A concentration of 40% gave rise to the biggest grain size, homogeneous morphology, higher absorption, and prevalence of black phase in the / phase coexistence. As a result, the perovskite with the NHSCN additive showed a positive effect on the growth mechanisms and enhanced stability due to the mixed /-phase and grain size ∼1350 nm. The preceding makes FAPbI film with a concentration of 40% a good option for application as stable perovskite in solar cells.
Incorporating a monolayer of WS2 via interface engineering enhances the overall physical properties of a FAPbI3 perovskite based heterostructure. FAPbI3/WS2/TiO2/ITO and FAPbI3/TiO2/ITO heterostructures were analyzed by UV–Vis spectroscopy, x-ray diffraction, scanning electron microscopy, and atomic force microscopy. The configuration with WS2 interlayer presents higher absorption in the visible region with a bandgap of ∼1.45 eV. WS2 also enhances the deposition process of FAPbI3, resulting in the formation of pure photoactive α-phase without the non-photoactive δ-phase or residual plumbates. The incorporation of the monolayer improves the crystalline structure of the FAPbI3, promoting a preferential growth in the [100] direction. The smooth surface of WS2 favors a homogeneous morphology and an increase in the grain size to ∼4.5 μm, the largest reported for similar structures. Furthermore, the work function obtained lets us propose an enhanced an adequate energy band alignment between FAPbI3 and the n-type layers for the electron flux to the cathode. Conductivity and IV curves show a better performance with WS2. These findings strongly suggest that the interfacial coupling of FAPbI3/WS2 could be a promising candidate in photovoltaic applications.