This study determined the effect of introducing the NHSCN additive in the precursor solution of PbI of a sequential deposition method in an open atmosphere to form FAPbI perovskite over a glass substrate. Adding NHSCN leads to different intermediate layers according to the concentration of the additive. From an adequate concentration, an ionic substitution between I and SCN is promoted, providing a unique path for nucleation and growth of FAPbI due to significant changes in morphology. The intermediate layer with a proper amount of NHSCN enhanced the physical properties of FAPbI. It contributed to understanding the crystallinity and morphological conditions for favorable growth of FAPbI directly over a glass substrate. A concentration of 40% gave rise to the biggest grain size, homogeneous morphology, higher absorption, and prevalence of black phase in the / phase coexistence. As a result, the perovskite with the NHSCN additive showed a positive effect on the growth mechanisms and enhanced stability due to the mixed /-phase and grain size ∼1350 nm. The preceding makes FAPbI film with a concentration of 40% a good option for application as stable perovskite in solar cells.
Incorporating a monolayer of WS2 via interface engineering enhances the overall physical properties of a FAPbI3 perovskite based heterostructure. FAPbI3/WS2/TiO2/ITO and FAPbI3/TiO2/ITO heterostructures were analyzed by UV–Vis spectroscopy, x-ray diffraction, scanning electron microscopy, and atomic force microscopy. The configuration with WS2 interlayer presents higher absorption in the visible region with a bandgap of ∼1.45 eV. WS2 also enhances the deposition process of FAPbI3, resulting in the formation of pure photoactive α-phase without the non-photoactive δ-phase or residual plumbates. The incorporation of the monolayer improves the crystalline structure of the FAPbI3, promoting a preferential growth in the [100] direction. The smooth surface of WS2 favors a homogeneous morphology and an increase in the grain size to ∼4.5 μm, the largest reported for similar structures. Furthermore, the work function obtained lets us propose an enhanced an adequate energy band alignment between FAPbI3 and the n-type layers for the electron flux to the cathode. Conductivity and IV curves show a better performance with WS2. These findings strongly suggest that the interfacial coupling of FAPbI3/WS2 could be a promising candidate in photovoltaic applications.
In the past few years, Facebook has been increasingly studied for academic purposes due to its potential benefits to undergraduate education. Problems commonly found in university education include the lack of course engagement and the gap between theory and practice. This research contributes to the literature by investigating the impact of incorporating a non-mandatory Facebook group on learning outcomes. The analysis was done using a Taguchi method design, conducted with three two-level controlled factors (term, Facebook, and teacher). Results indicated that the students who participated in Facebook groups were more engaged with the course and applied theoretical knowledge to real-life problems better than students who learned under traditional instructional designs. Moreover, the use of Facebook groups led to better evaluation of teachers by the students. Furthermore, the student academic impact (knowledge and competence) was higher even though this complementary activity was not included in the course grade. We concluded that Facebook groups are excellent support tools that boost student engagement and their understanding of theoretical concepts and applying them in practice.
The objective of this work is to design a rehabilitation mechanism for the index finger that can replicate the finger’s natural movements in the sagittal plane; this mechanism must also be able to adapt to an individual’s anthropometric dimensions. The personalization of the mechanism is made through a parametric model assisted by computer-aided design software. An infrared motion capture system is used to validate the natural finger movements, comparing them to the ones generated by the parametric designed mechanism. The replication of natural finger movements with this mechanism is possible due to the use of virtual centers and the employment of two degrees of freedom. One degree of freedom is proximal phalanx flexion-extension, and the other one is the middle-distal phalanges conjoined movement. The replication of natural motions and the use of personalization techniques offer three main advantages: a diverse set of rehabilitation exercises, an increase in the range of motion of the finger compared to other designs in the literature and the short construction time required for the rehabilitation device.
En el presente trabajo se propone una metodología de diseño de robots paralelos de cinco eslabones y dos grados de libertad que hace uso de herramientas tecnológicas para simplificar el proceso de diseño. El uso de simuladores permite el diseño sin necesidad del uso y cálculo del modelo dinámico del sistema, de esta manera agilizar el proceso de diseño y permitir ajustes en el diseño de manera eficiente. La metodología se presenta con un diagrama de flujo donde se desarrollan los siguientes pasos: definición de problema y restricciones, cálculo de cinemática inversa, propuesta de longitud de eslabones, propuesta de actuadores, propuesta de diseño y material de eslabones, diseño CAD, simulación dinámica, análisis por elemento finito, construcción de prototipo, programación de microcontrolador, selección de etapa de potencia y diseño de interfaz. Un robot paralelo de cinco eslabones y dos grados de libertad es desarrollado para ejemplificar la metodología de diseño y se valida que este cumpla adecuadamente con el problema y la tarea definida.