Romeu Rony Cavalcante Rony Cavalcante da Costa

Dr. Romeu Rony Cavalcante Rony Cavalcante da Costa


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2021 in Journal of Composite Materials
Verified
Journal Article
Closed access
PDF file
AMAna P de Moura
Ana P de Moura
EPEnio Henrique Pires
Enio Henrique Pires
VSVanessa S dos Santos
Vanessa S dos Santos
MGMiguel F Galera
Miguel F Galera
FSFlaminio Cp Sales
Flaminio Cp Sales
RCRomeu Rony Cavalcante Rony Cavalcante da Costa
Romeu Rony Cavalcante Rony Cavalcante da Costa
Due to its exceptional biocompatibility, Polyurethane (PU) reinforced with calcium carbonate (CaCO3) is a composite material with significant biomedical applications. However, much of the currently known mechanical and chemical information regarding composites has been obtained at low and moderate CaCO3 content levels. This study employs experimental and theoretical tools to evaluate the structural, morphological, and mechanical properties of pristine polyurethane, and when doped with CaCO3 at 25 and 50 wt.%. In the experiments the samples are characterized using X-ray diffraction (XRD), infrared spectrophotometry (FT-IR), scanning electron microscopy (SEM), and tensile and flexural mechanical tests, while theoretical calculations are performed to evaluate the carbonate-polymer interaction. The XRD and FT-IR results indicate that CaCO3 is at the calcite phase and that PU-CaCO3 materials exhibit a broadening of bands related to the NH2 group. This result is explained using theoretical calculations that demonstrate a weak interaction between those molecules with the CaCO3 surface, where the molecule-calcite interaction occurs primarily through the NH2 molecular link. With respect to mechanical behaviour, the results show less fracture resistance and greater stiffness for the materials containing CaCO3, compared to those containing only PU. These results are explained in terms of the stress concentration due to CaCO3 within the polymer. Finally, the results detailed in this paper show that a high calcium carbonate loading is suitable for increasing the rigidity and decreasing the fracture toughness of the biomaterial, in association with a reduction of the plastic region.

3 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
EPEnio Henrique Pires
Enio Henrique Pires
Silvio De BarrosSilvio De Barros
Silvio De Barros
André Ferreira Costa VieiraAndré Ferreira Costa Vieira
André Ferreira Costa Vieira
RCRomeu Rony Cavalcante Rony Cavalcante da Costa
Romeu Rony Cavalcante Rony Cavalcante da Costa
Marcelo Leite RibeiroMarcelo Leite Ribeiro
Marcelo Leite Ribeiro
The aim of this work is to evaluate the changes in compression properties of a bio-based polyurethane foam after exposure to 90 °C for different periods of time, and to propose a method to extrapolate these results and use a numerical approach to predict the compression behaviour after degradation for untested conditions at different degradation times and temperatures. Bio-based polymers are an important sustainable alternative to oil-based materials. This is explained by the foaming process and the density along the material as it was possible to see in a digital image correlation analysis. After 60 days, stiffness was approximately decreased by half in both directions. The decrease in yield stress due to thermo-oxidative degradation had a minor effect in the foaming directions, changing from 352 kPa to 220 kPa after 60 days, and the transverse property was harshly impacted changing from 530 kPa to 265 kPa. The energy absorption efficiency was slightly affected by degradation. The simulation of the compression stress-strain curves were in accordance to the experimental data and made it possible to predict the changes in mechanical properties for intermediate periods of degradation time. The plateau stress for the unaged foam transverse to the foaming direction presented experimental and numerical values of 450 kPa and 470 kPa, respectively. In addition, the plateau stresses in specimens degraded for 40 days present very similar experimental and numerical results in the same direction, at 310 kPa and 300 kPa, respectively. Therefore, this paper presents important information regarding the life-span and degradation of a green PUF. It provides insights into how compression properties vary along degradation time as function of material operation temperature, according to the Arrhenius degradation equation.

1 January 2019 in Polímeros
Verified
Journal Article
Open access
PDF file
RCRomeu Rony Cavalcante Rony Cavalcante da Costa
Romeu Rony Cavalcante Rony Cavalcante da Costa
FAFellipe Roberto Biagi de Almeida
Fellipe Roberto Biagi de Almeida
ASAmanda Albertin Xavier da Silva
Amanda Albertin Xavier da Silva
SDSandra Mara Domiciano
Sandra Mara Domiciano
André Ferreira Costa VieiraAndré Ferreira Costa Vieira
André Ferreira Costa Vieira
Hip joint prosthesis are structural components that still have some challenging problems such as the interaction of physical and biological properties between the stem and the human femur. Composite materials allow to obtain high strength structures with a large variety of modulus of elasticity and favorable characteristics in the context of orthopedic implants. Therefore, the objective of this work was the development of a prosthesis model with biopolymeric matrix, namely the polyurethane (PU) derived from castor oil, reinforced with fiberglass. The implants were made of pure PU, PU with fiberglass, and PU with glass fiber and calcium carbonate. The reinforcement was constructed in the form of a core to be inserted into the hip prosthesis. The core and stem prototypes were produced using three-dimensional printing techniques, and subsequently used in the manufacture of flexible silicone molds. The results showed good mechanical potentialities of this material for orthopedics applications.

7 January 2022 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Verified
Journal Article
Closed access
ESEhp Silva
Ehp Silva
JAJcf Aguiar
Jcf Aguiar
GWG Waldow
G Waldow
RCRomeu Rony Cavalcante Rony Cavalcante da Costa
Romeu Rony Cavalcante Rony Cavalcante da Costa
VTV Tita
V Tita
MRMl Ribeiro
Ml Ribeiro
Compression and morphological evaluation of a new bio-based polyurethane foam (PUF) with aluminum hydroxide (ATH) added as flame retardant were carried out. The PUF was obtained from a blend of vegetable oils. Compression behavior of the polyurethane with different mass fractions of flame retardant (ATH) was investigated according to ASTM D1621–16. The ATH addition highly increased the compression yield strength of the specimens, going from 0.85 MPa (no ATH) to 2.34 MPa ( + 50%wt ATH). The compression yield strain did not show a noteworthy difference up to 40% ATH, presenting a significant decrement in the PUF + 50%ATH. The compression elasticity modulus increased from 15.40 MPa (no ATH) up to 139.77 MPa ( + 50%wt ATH). SEM images were used in order to evaluate the morphological structure of the foam. Regarding the cell sizes, there was no pattern observed, therefore, the cell sizes were adopted as random. The shapes of the cells were detected as elliptical in two different directions in the same cross-sectional area. The digital image correlation (DIC) technique showed higher strain values where the transverse ellipsoid-shaped cells were located, therefore, the load-oriented ellipsoids presented higher stiffness. Thus, the results for PUF with addition of ATH show that the bio-based material presented an important improvement in the compression properties, which allows this material to become more useful for different applications, such as furniture, building and automobile industries, as well as sandwich structures.

27 December 2022 in Journal of Vibration Engineering & Technologies
Verified
Journal Article
Closed access
PDF file
CSCamila Albertin Xavier da Silva
Camila Albertin Xavier da Silva
FLFabian Andres Lara-Molina
Fabian Andres Lara-Molina
RCRomeu Rony Cavalcante Rony Cavalcante da Costa
Romeu Rony Cavalcante Rony Cavalcante da Costa
EKEdson Hideki Koroishi
Edson Hideki Koroishi
MAMarco Túlio Santana Alves
Marco Túlio Santana Alves
RPRodrigo Henrique Cunha Palácios
Rodrigo Henrique Cunha Palácios