Over the last two decades, the repair of existing engineering structures using fiber reinforced polymer composites has attracted a great attention by aerospace industry, as it is more economical than replacing new. With an increased use of composite material in aerospace field, it is thus essential to restore the structural integrity by repair of damaged part. Concerns regarding the long term durability of composite repair bonded joints have been a major obstacle for critical component of aerospace structures. This paper reviews the current research on the environmental durability of adhesive bonded repair of composite structures to focus on the durability concerns and suggestion on the research needed in this area. The most important environmental factors (moisture and temperature) are reviewed thoroughly and also combined environmental effect. Finite element methods used to predict the environmental influence on the composite bonded joints are briefly reviewed. Finally, the paper concludes with key findings, opportunities and future research topics in order to develop cost effective, better quality and reliable composite repair bonded joints.
1 December 2016 in Latin American Journal of Solids and Structures
Surface treatment of the adherends prior to adhesive bonding plays an important role in the enhancing of strength and durability of bonded joints. In this work, an investigation on effect of adherend surface roughness on adhesive bond strength was performed. Single strap joints with different adherends (mild steel and aluminium) bonded with an epoxy resin (Araldite(r) 2015) were tested. The adherend surface was treated by mechanical abrasion process using an emery paper. Contact angle measurement and SEM analysis to understand the wettability and the failure mechanism of the joints were performed. It was found that an optimum surface roughness exists for a maximum bonding strength and the roughness range depends on the adherend material. The joint strength changes are associated not only simply by the increased bonding area, surface texture or mechanical interlocking, but also by the chemical characteristics of the surface and the chemical bond between them.
Blending of biodegradable polymers in combination with low-price organic fillers has proven to be a suitable approach to produce cost-effective composites in order to address pollution issues and develop products with superior mechanical properties. In the present research work PBAT/PHB/Babassu composites with 25, 50, and 75% of each polymer and 20% of Babassu were produced by melting extrusion. Their thermal, mechanical, and morphological behavior was investigated by differential scanning calorimetry (DSC), tensile testing, and scanning electron microscopy (SEM). Blending PBAT with PHB inhibited the crystallization of both polymers whereas adding Babassu did not significantly change their melting behaviour. Incorporation of Babassu reduced the tensile strength of its respective blends between 4.8 and 32.3%, and elongation at break between 26.0 and 66.3%. PBAT as highly ductile and low crystalline polymer may be seen as a crystallization tool control for PHB as well as a plasticizer to PBAT/PHB blends and PBAT/PHB/Babassu composites. As PBAT content increases: (i) elongation at break increases and (ii) surface fracture becomes more refined indicating the presence of more energy dissipation mechanisms. As PBAT/PHB/Babassu composites are biodegradable, environmental friendly, and cost effective, products based on these compounds have a great potential since their mechanical properties such as ductility, stiffness, and tensile strength are still suitable for several applications even at lower temperatures (−40 °C).