The commercial primary alkaline zinc–manganese cells after current loads and thermal treatment are studied using electrochemical impedance spectroscopy. The components of electric circuits and...
1 February 2012 in Surface Engineering and Applied Electrochemistry
The conductivity of distilled water and dilute electrolyte solutions in the presence and absence of dissolved oxygen is studied. It is found that the circuit can be implemented with equal probability...
1 November 2015 in Surface Engineering and Applied Electrochemistry
In a study of the interaction between an enzyme preparation of black horseradish and various inorganic substrates (kaolin, aerosil, bentonite and its modified form) by electrochemical impedance...
Electrochemical impedance spectroscopy was used to study the electrical parameters of graphite-graphene systems with different mass concentrations of graphene. Graphene was synthesized using two methods of plasma arc discharge from aqueous and non-aqueous medium (water and liquid nitrogen) to determine the impact of graphite concentration, water, and heat treatment of graphene on electrical parameters (conductivity and electrostatic capacity) of the graphite-graphene mixture. The average values of active resistance and electrostatic capacity of these systems are obtained. The optimal ratio of components with high capacitance and conductivity, which was 1: 1. The influence of heat treatment adsorbed on the graphene surface of the water and mass fraction of graphite on the change of electrical parameters of the system is shown. Comparison of the values of capacity and active resistance of the samples showed that the presence of water in graphene reduces the average values of capacity relative to graphene without water by 10 times and symbatically increases the active resistance at a mass ratio of graphene to graphite 1: 3, and at a ratio of 1: 1 values are proportional. Comparison of resistance, capacitance, and charge distribution calculations in a graphite-graphene mixture in the frequency range 10–2 ÷ 103 Hz established the effect of heat treatment on increasing the values of capacitance and active resistance. Heat treatment at 2500C of graphene, synthesized from an aqueous medium, leads to an increase in the values of capacitance and conductivity, which occurs due to a different distribution of charges on the surface. Analysis of charge distribution maps shows that water adsorbed on the surface of graphene in the presence of a significant amount of graphite can be a factor in interfering with the distribution of charge carriers and significantly reduce the conductivity and electrostatic capacity of the system.
Electrochemical impedance spectroscopy (EIS) is playing an increasingly significant role in fundamental and applied research: to study any type of solid and liquid materials (ionic, mixed, semiconductor, and insulators), to study charge transfer in heterogeneous systems, including phase boundaries, electrode boundaries, and elements of the microstructure. With the help of EIS, it is possible to study the behavior of chemical sensors, fuel cells, batteries, and corrosion processes. The base of the method stays on the principle of exciting any electrochemical system with a signal in the form of a sinusoidal wave and observing its behavior in response to this disturbance. This is the simplest method for determining the structural and transport functions of the system under study. This is the simplest method for determining the structural and transport functions of the system under study. The book discusses the theoretical foundations of the method of impedance spectroscopy, including the method of equivalent circuits, and provides examples of the analysis of impedance spectra for real objects. The main attention is paid to the model elements of equivalent circuits, their physical base, and the use of the models in the analysis of electrochemical systems. Handbook consists of seven chapters. It has questions and tasks to self-work after each part. It is intended for students of chemical, chemical-technological, and biomedical specialties, as well as for specialists engaged in research in the field of materials science, medicine, and ecology.