Yasser M. Riyad

Dr. Yasser M. Riyad

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2024 in Sustainable Materials and Technologies
Verified
Journal Article
Closed access
KPKamal Prajapat
Kamal Prajapat
UMUjjwal Mukund Mahajan
Ujjwal Mukund Mahajan
AKAshok Kumar
Ashok Kumar
MDMAHESH DHONDE
MAHESH DHONDE
KSKIRTI SAHU
KIRTI SAHU
ZEZeinhom M. ElBahy
Zeinhom M. ElBahy

30 May 2023 in Water
Verified
Journal Article
Open access
PDF file
ZMZeinhom Hossni Mohamed
Zeinhom Hossni Mohamed
YRYasser M. Riyad
Yasser M. Riyad
HHHassan A. Hendawy
Hassan A. Hendawy
HAHassan M. H. Abdelbary
Hassan M. H. Abdelbary
Antidepressants are one of the main pollutants in the aquatic environment. They are being widely studied due to their widespread use, possible health effects, and partial removal from wastewater treatment plants by conventional methods. Photocatalysis is an effective and ecologically beneficial method in wastewater treatment. In the present study, the photocatalytic degradation of sertraline hydrochloride (SERT) in water using nano-sized zinc oxide (ZnO-NPs) was investigated. The ZnO-NPs were synthesized from zinc gluconate as a precursor by the sol–gel method. The crystal structure, morphology, surface charge, and textural properties were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analyses, transmission electron microscopy, Fourier-transform infrared spectroscopy, zeta potential, and N2 adsorption–desorption measurements. The removal of SERT in water was explored by different processes: H2O2/UV, ZnO-NPs/H2O2/UV, and ZnO-NPs/UV. Our results indicate that the combination of both UV illumination and the ZnO-NP as a catalyst was necessary for the efficient degradation of the drug. Nearly complete removal of SERT (98.7%) was achieved in 30 min with the ZnO-NPs/UV process at room temperature. The photodegradation of SERT follows first-order kinetics with a rate constant of 0.0678 min−1. The results reveal that SERT degradation with ZnO-NPs/UV is pH-dependent, as the maximum drug removal was achieved at pH 11. Initial drug concentration, catalyst dose, and hydrogen peroxide concentration were also crucial in the removal of SERT. Our findings indicate that the high specific surface area and porous structure of ZnO-NP enhance its photocatalytic performance toward photodegradation of SERT, i.e., ZnO-NP is an efficient nanophotocatalyst for the degradation of SERT under UV irradiation.

YRYasser M. Riyad
Yasser M. Riyad
TETaha M. Elmorsi
Taha M. Elmorsi
MAMohd Gulfam Alam
Mohd Gulfam Alam
BABernd Abel
Bernd Abel
In this study, a valuable adsorbent was functionalized using commercial ZnO and a mango seed extract (MS-Ext) as a green approach for synthesis. Fourier-transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, and energy-dispersive X-ray analysis spectraconfirmed the presence of bioactive phenolic compounds and Cu2+ ions on the surface of ZnO. Functionalized Cu-doped ZnO/MS-Ext exhibits high efficacy in acidic, neutral, and alkaline medium, as indicated by 98.3% and 93.7% removal of methylene blue (MB) and crystal violet (CV) dyes, respectively. Cu-doped ZnO/MS-Ext has a zeta potential significantly lower than pristine zinc oxide (p-ZnO), which results in enhanced adsorption of cationic MB and CV dyes. In binary systems, both MB and CV were significantly removed in acidic and alkaline media, with 92% and 87% being removed for CV in acidic and alkaline media, respectively. In contrast, the removal efficiency of methyl orange dye (MO) was 16.4%, 6.6% and 11.2% for p-ZnO, ZnO/Ext and Cu-doped ZnO/Ext, respectively. In general, the adsorption kinetics of MB on Cu-doped ZnO/MS-Ext follow this order: linear pseudo-second-order (PSO) > nonlinear pseudo-second-order (PSO) > nonlinear Elovich model > linear Elovich model. The Langmuir isotherm represents the adsorption process and indicates that MB, CV, and MO are chemisorbed onto the surface of the adsorbent at localized active centers of the MS-extract functional groups. In a binary system consisting of MB and CV, the maximum adsorption capacity (qm) was 72.49 mg/g and 46.61 mg/g, respectively. The adsorption mechanism is governed by electrostatic attraction and repulsion, coordination bonds, and π–π interactions between cationic and anionic dyes upon Cu-doped ZnO/Ext surfaces.

9 December 2025 in Dalton Transactions
Verified
Journal Article
Closed access
PDF file
ZFZainab Fareed
Zainab Fareed
TTTayyaba Tariq
Tayyaba Tariq
SSShaaban M. Shaaban
Shaaban M. Shaaban
MYMuhammad Yar
Muhammad Yar
MKMuhammad Ali Khan
Muhammad Ali Khan
YRYasser M. Riyad
Yasser M. Riyad
Novel Co@B12N12 with an activation barrier of 0.14 eV, as a clean and scalable energy carrier and a cost-effective, noble metal-free single atom catalyst.

3 March 2026 in Discover Materials
Verified
Journal Article
Open access
PDF file
FAFahad H. Aljohni
Fahad H. Aljohni
EMEmad Masoud
Emad Masoud
SPSaheed A. Popoola
Saheed A. Popoola
YRYasser M. Riyad
Yasser M. Riyad
Congo red dye (CR) is a toxic, environmentally persistent compound that exhibits mutagenic and carcinogenic properties. Due to the dye’s persistence and toxicity, its removal from wastewater is a pressing environmental need. This work demonstrates the successful synthesis of a novel CSPAn-based nanocomposite, characterized by appreciably high thermal and mechanical stability, a moderately high surface area, and efficient removal of CR. The composites were fabricated by loading varying amounts of silicon dioxide nanoparticles (SiO2) (5–30%) into the chitosan-polyaniline matrix (CSPAn) via a chemical oxidation procedure. The synthesized materials were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy, and their surface properties (the Brunauer, Emmet and Teller (BET) surface area, total pore volume, mean pore radius, and point of zero charge) were determined. Among the investigated samples, the new CSPAn/nano SiO2-20% composite (CSPAnS3) showed the highest values of both surface area and total pore volume (21.70 m2/g and 0.083 cm3/g, respectively), and high thermal stability. The effect of nanoparticle oxide composition, adsorbent dosage, solution pH, initial dye concentration, contact time, and temperature, on the removal of CR was explored. CSPAnS3 has been found to exhibit superior adsorption efficiency, achieving 100% removal of CR in 40 min. CSPAnS3 composite showed the highest adsorption capacity at 394.93 mgg− 1 and exhibited strong affinity for CR. The adsorption data were fitted to the pseudo-second-order kinetic model, indicating that the interaction between CR molecules and CSPAnS3 is achieved by chemisorption. Electrostatic, hydrogen bonds, and π-π interactions explained the mechanism. The CSPAnS3 adsorbent demonstrated excellent stability and reusability across multiple cycles, underscoring its potential for practical, sustainable applications. Graphical abstract

10 March 2026 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
TETaha M. Elmorsi
Taha M. Elmorsi
MMMostafa H. Mohamed
Mostafa H. Mohamed
YRYasser M. Riyad
Yasser M. Riyad
HAHassan M. Abdelbary
Hassan M. Abdelbary