Polycrystalline zinc selenide (ZnSe) and Cr²⁺ or Fe²⁺ doped ZnSe are key optical elements in mid-infrared laser systems. The laser-induced damage of the optical elements is the limiting factor for increasing the power and pulse energy of the lasers. In the present work, the optical damage of the ZnSe, Cr²⁺:ZnSe, and Fe²⁺:ZnSe samples induced by a repetitively pulsed Ho³⁺:YAG laser at 2091 nm was studied. The probability of the optical damage and the laser-induced damage threshold (LIDT) were determined for the samples manufactured using different processing techniques. The highest LIDT was found in ZnSe samples annealed in an argon atmosphere. It was also found that the samples annealed in a zinc atmosphere or with hot isostatic pressing resulted in a decrease in the LIDT. The Cr²⁺-doped ZnSe had the lowest LIDT at 2.1 µm compared to Fe²⁺-doped or undoped ZnSe. The LIDT fluence of all tested ZnSe samples decreased with the increase in the pulse repetition rate and the exposure duration. The results obtained may be used to improve the treatment procedures of ZnSe, Cr²⁺:ZnSe, and Fe²⁺:ZnSe polycrystals to further increase their LIDT.

The article presents a study aimed at obtaining a composite antifriction material. The structure and properties of a metal-glass material based on iron, represented by VK-1 powder, were researched. The relationship between the content of the reinforcing glass filler, represented by the shards of container glass, and the heat resistance of the resulting composite was revealed. It was revealed that with an increase in the content of glass filler up to 15% of the volume, the heat resistance increases.