Shengnan Li

Mrs. Shengnan Li


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SLShengnan Li
Shengnan Li
TJTuanhui Jiang
Tuanhui Jiang
XZXiangbu Zeng
Xiangbu Zeng
NZNenggui Zhu
Nenggui Zhu
CSChao Shen
Chao Shen
LHLi He
Li He
The α-olefin–maleic anhydride copolymer DIA as a chain extender was used to modify polyamide 6 (PA6) during melt blending. The ability to modulate this modification for PA6 has been shown to be dependent on the effects of its content on the molecular weight distribution, rheological properties, crystalline properties, mechanical properties, and foaming behavior of foam samples. By increasing the DIA content, the viscoelasticity, water contact angle, and elongation at break improved as a result of a significant decrease in water absorption and melt flow rate. Compared with raw PA6, the modified PA6 presented a relatively wider molecular weight distribution. However, the crystallinity of modified PA6 samples decreased, the double melting peaks became one peak, and the α crystallites at 20.3° gradually disappeared with increasing DIA content. The morphologies of composite foams with different contents were analyzed using scanning electron microscopy. It was found that the cell size of different PA6 samples decreased from 160 μm to 83 μm and the cell density increased from 1.1 × 105 cells/cm3 to 5.9 × 105 cells/cm3 when the content of DIA increased from 0 wt% to 5 wt%. Meanwhile, the cell morphology obviously improved and the cell size distribution became narrow. Thus, a preparation technology based on foaming materials with excellent performance, such as better bubble quality and low water absorption, was developed for further research and application.

1 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
RDRong Deng
Rong Deng
TJTuanhui Jiang
Tuanhui Jiang
CZChun Zhang
Chun Zhang
XZXiangbu Zeng
Xiangbu Zeng
BLBujin Liu
Bujin Liu
LHLi He
Li He
In this paper, the dynamic foaming process of micro-foaming polypropylene (PP) in different foaming environments in real time was obtained via a visualization device. The relationship curve between cell number (n) and foaming time (t) was plotted, and then the nucleation kinetics of foam cells was analyzed. Results showed that the formation rate of cells changed obviously with the variation of melt temperature and the content of the foaming agent. The n-t curves presented a typical “S” shape, which indicated that the appearance of the cell number increased slowly in the initial foaming period, then increased rapidly in a short time, and finally maintained a certain value. When a certain pressure was applied to the PP melt, the external force had a great influence on the n-t curve. With the increasing external force, the rate of cell formation increased rapidly, and the shape of the n-t curve changed from “S” to “semi-S” without an obvious slow increase. The investigation of the n-t relationship in the PP dynamic foaming process under different foaming environments could provide effective bases for improving the foaming quality of injection molding foaming materials.