Nanoscale radiative thermal transport between a pair of metamaterial gratings is studied within this work. The effective medium theory (EMT), a traditional method to calculate the near-field radiative heat transfer (NFRHT) between nanograting structures, does not account for the surface pattern effects of nanostructures. Here, we introduce the effective approximation NFRHT method that considers the effects of surface patterns on the NFRHT. Meanwhile, we calculate the heat flux between a pair of silica (SiO2) nanogratings with various separation distances, lateral displacements, and grating heights with respect to one another. Numerical calculations show that when compared with the EMT method, here the effective approximation method is more suitable for analyzing the NFRHT between a pair of relatively displaced nanogratings. Furthermore, it is demonstrated that compared with the result based on the EMT method, it is possible to realize an inverse heat flux trend with respect to the nanograting height between nanogratings without modifying the vacuum gap calculated by this effective approximation NFRHT method, which verifies that the NFRHT between the side faces of gratings greatly affects the NFRHT between a pair of nanogratings. By taking advantage of this effective approximation NFRHT method, the NFRHT in complex micro/nano-electromechanical devices can be accurately predicted and analyzed.
Thermophotovoltaics is a promising technology for heat recovery and has garnered tremendous attention in the last decades. This work theoretically evaluates the performance of a thermophotovoltaic system equipped with refractory all-ceramic selective thermal emitters made of boron carbide, silicon carbide and beryllium oxide for a high working temperature of 2000 C, which corresponds to the external quantum efficiency of a SiC/Si tandem cell. The influence of thickness and filling ratio on the emissivity of thermal emitters over the wavelength ranging from 0.2 m to 2.5 m is studied. The corresponding spectral heat flux and output power are analyzed as well. For a specific configuration, the parameters for the thermophotovoltaic system are obtained, including short circuit current, open circuit voltage, fill factor, total heat flux, output power and conversion efficiency. The proposed all-ceramic thermal emitter ensures the robustness in the high-temperature working condition due to its thermal stability. The tuning of emissivity is achieved and analyzed based on distinct emitter nanostructures, and the further influence on the thermophotovoltaic system performance is deeply explored. This work sheds light on research of high-temperature thermal management and power generation.
Polymer nanofibers have the ability to replace expensive materials, such as metals, ceramics and composites, in specific areas, such as heat exchangers, energy storage and biomedical applications. These properties have caused polymer nanofibers to be explored as solutions to a growing list of thermal management problems, driving an even greater need to better measure and understand the thermal properties of these nanofibers. This study intends to further the understanding of the thermal properties of polymer nanofibers through the use of a novel Probe-to-Probe measurement method. Polycaprolactone nanofibers fabricated using the electrospinning method can be easily collected and loaded into a traditional atomic force microscope through a mechanical design for thermal measurement. This Probe-to-Probe method demonstrates the ability to accurately measure the thermal boundary conditions about a polymer nanofiber with a heating prong temperature up to 400 C and assists in characterizing its thermal properties.