The rapid development of fusion-reactor technology calls for excellent anti-irradiation materials. Complex concentrated alloy (CCA) is a newly proposed alloy concept which is a promising candidate of nuclear fusion materials by virtue of its great phase stability under irradiation. This article summarizes anti-radiation mechanism and the microstructure evolution in HEAs. The effective factors on irradiation behavior of HEAs, including entropy, sample size and temperature, are discussed. Finally, the article introduces the potential ways to solve the economic and environmental problems which the HEAs faced for their applications in the future. In summary, the HEAs usually show better irradiation resistance than traditional alloys, such as less swelling, smaller size of defects, and more stable mechanical properties. One possible reason for the irradiation resistance of HEA is the self-healing effect induced by the high-entropy and atomic-level stress among the metal atoms. The activation of the principal element should be considered when selecting components of HEA, and the high throughput technique is a potential way to reduce the design and fabrication cost of HEAs. It is reasonable to expect that coming years will see the application of novel HEAs in fusion reactors.
In contrast to practical hot compression processes, the testing of the hot workability of TiAl alloys is usually conducted under the conditions of constant strain rates and constant temperatures. This work aims at investigating the microstructural evolution of TiAl alloys on a Gleeble-3800 thermomechanical simulator under a variable strain rate (0.1, 0.01 and 0.001 s−1) at 1200 °C. The results show that, after a holding time of 30 s, the abrupt change in the strain rate at ε = 0.3 (engineering strain) has a remarkable influence on the flow stress and dynamic recrystallization (DRX) behavior of the β-γ Ti-44Al-6Nb-1Mo-0.3 (B, Y, La, Ce) (at.%) alloy. The flow stress demonstrates a rapid decrease with a sudden reduction in the strain rate. A duplex microstructure of γ + B2/β can be obtained under a high strain rate or continuous medium strain rate. During the two-step deformation, however, both γ→α phase transformation and DRX exist, and the content of the α phase demonstrates a significant increase when the strain rate becomes lower. Finally, a fine-grained structure of γ + B2/β + α2 phases with low residual stresses can be obtained via the two-step heat treatment processes. This provides a promising approach to significantly improve the hot workability of β-γ TiAl alloys.