In the quadcopter, the performance of driving motor deteriorates with repeated flying cycles. However, the degradation is compensated by feedback control to maintain intended flight mission, which renders the state of degradation difficult to estimate until the failure occurrence. In order to solve this problem, a novel Kalman filter-based prognostics framework is proposed, which predicts the current health and remaining useful life (RUL) of the driving motors by taking advantage of the flight control data acquired during the flight, not by installing additional sensors. The framework consists of the online health diagnosis by the two-stage Kalman filters to estimate the motor speeds and the maximum thrusts, and the offline failure prognosis to predict the RUL of each motor by the particle filter algorithm. A Parrot Mambo drone is chosen to demonstrate the approach, in which the flight control data are collected during the hovering motion at regular intervals while one of the motors undergoes accelerated degradation. The result shows that the framework predicts the RUL of the degraded motor with close accuracy against the failure threshold which is the minimum thrust for takeoff of the quadcopter.
Trajectory tracking is a crucial aspect of controlling nonlinear systems and is an important area of research. Researchers have proposed several strategies to perform this task in the presence of perturbations, which are the sum of a system’s uncertainty, modeling errors, and external disturbances. Nonlinear systems, such as robot manipulators, have complex dynamics, and deriving their exact mathematical models is a tedious task. Therefore, the objective of this research is to design a model-free form of control for such systems. To achieve this goal, a sliding mode control (SMC) with a proportional-integral-derivative (PID) sliding surface was designed and integrated with a saturation-function-based extended-state observer (ESO). In an extended-state observer (ESO), the primary concept is to define the system’s perturbation. The ESO estimates the system’s states and perturbation, including the known and unknown dynamics, uncertainties, and external disturbances, which are considered as perturbations. The estimated perturbation is used in a closed loop to cancel the actual perturbation. This perturbation-rejection technique improved the controller’s performance, resulting in reduced position error, reduced sensitivity to low-frequency elements of perturbation, and a small magnitude of switching gain. The designed control algorithm requires minimal information about the system, specifically position feedback, and, therefore, there is no need to identify the system parameters. A mathematical analysis of the designed algorithm was performed in detail, and the algorithm was compared with the existing ESO-based SMC algorithm. Simulations were conducted using MATLAB/SimMechanics on two different systems, and the comparison results validated the performance of the designed algorithm in comparison to previous research.
30 June 2019 in Journal of the Korean Society for Aviation and Aeronautics
Inertia properties of rigid body such as ground, aerial, and space vehicles may be changed by several occasions, and this variation of the properties influences the control accuracy of the rigid body. For this reason, accurate inertia properties need to be obtained for precise control. An estimation process is required for both noisy gyro measurements and the time derivative of the gyro measurements. In this paper, an estimation method is proposed for having reliable estimates of inertia properties. First, the Euler equations of motion are reformulated to obtain a regressor matrix. Next, the extended Kalman filter is adopted to reduce the noise effects in gyro angular velocity measurements. Last, the inertia properties are estimated using linear least squares. To achieve reliable and accurate angular accelerations, a Savitzky-Golay filter based on an even number sampled data is utilized. Numerical examples are presented to demonstrate the performance of the proposed algorithm for the case of a space vehicle. The numerical simulation results show that the proposed algorithm provides accurate inertia property estimates in the presence of noisy measurements.