Surfaces with metal oxide nanostructures have gained considerable interest in applications such as sensors, detectors, energy harvesting cells, and batteries. However, conventional fabrication techniques suffer from challenges that hinder wide and effective applications of such surfaces. Most of the metal oxide nanostructure synthesis methods are costly, complicated, non-scalable, environmentally hazardous, or applicable to only certain few materials. Therefore, it is crucial to develop a simple metal oxide nanostructure fabrication method that can overcome all these limitations and pave the way to the industrial application of such surfaces. Here, we demonstrate that a wide variety of metals can form metal oxide nanostructures on their surfaces after simply interacting with hot water. This method, what we call hot water treatment, offers the ability to grow metal oxide nanostructures on most of the metals in the periodic table, their compounds, or alloys by a one-step, scalable, low-cost, and eco-friendly process. In addition, our findings reveal that a “plugging” mechanism along with surface diffusion is critical in the formation of such nanostructures. This work is believed to be of importance especially for researchers working on the growth of metal oxide nanostructures and their application in functional devices.
6 June 2017 in The International Journal of Advanced Manufacturing Technology
Bacterial biofilm has become one of the most frequent health problems as it contributes to persistent chronic infections. Therefore, it is vital to find alternatives to currently used bactericidal agents to prevent bacterial contamination on surfaces effectively and prevent the biofilms formation. Several metallic materials are well known for their antimicrobial activity; this includes copper, copper alloys, silver, gold, titanium, and zinc. On the other hand, some metals, such as aluminum, do not have noteworthy antimicrobial properties. In this study, we demonstrate that the antibacterial activity of household aluminum foil can be enhanced by nanostructuring the foil’s surface by a simple hot water treatment (HWT) process. Cultures of Escherichia coli and Staphylococcus aureus were grown on nutrient agar while exposed to the samples of treated and untreated Al foils and left for 24 h. Our results indicate that treated Al foil can more effectively inhibit the bacteria growth compared to the regular untreated Al foil. This enhancement in antibacterial property might be due to a combination of chemical and morphological changes that the cell undergoes once it encounters nanofeatures of HWT-Al foil surface.
In this research, a special wettable copper mesh with superhydrophobicity and superoleophilicity properties is reported using a low-cost, eco-friendly, rapid, and scalable synthesis method. Hot water treatment (HWT) method is used to integrate the micro-textured copper mesh surface with a nanoscale roughness to achieve a hierarchical micro-nano structured surface. The surface energy of the nanoscale roughened copper mesh reduced by coating the hot water treated mesh with polymer ligands containing thiol or fluorine functional groups of low energy. Surface morphology characterization showed the formation of copper oxide nanostructures on the mesh surface by hot water process performed at 95 °C and under a low dissolved oxygen condition. X-ray diffraction patterns reveal the development of stable, uniformly distributed, and compactly arranged, cubic and plate-like nanostructures of cuprous oxide (Cu2O) on the copper mesh surface. The surface wettability of the as-prepared copper mesh was assessed by contact angle (CA) measurement for water and several oils and organic solvents. CA values showed the formation of special wettable copper mesh surface with superhydrophobic property with water contact angle of about 157° and superoleophilic property with oil contact angle as low as 0°. In addition, the effect of the mesh's geometry on the wetting property was examined through correlations between wire diameter, pore size, and optimal values for the highest water CA.
Dropwise condensation of water vapor is crucial for industrial processes such as thermal management, power generation, air conditioning, and dew/fog harvesting. Continuous dropwise condensation requires surfaces with optimized droplet nucleation and efficient departure, relying on heterogeneous wettability and surface engineering. This study introduces a simple, cost-effective, and environmentally friendly method to fabricate hierarchical micro–nanoroughened surfaces on aluminum alloy, copper, and zinc substrates. By combining sandblasting for microscale roughness and hot water treatment (HWT) for nanoscale features, the process overcomes limitations of existing substrate-specific or costly fabrication methods. The resulting surfaces exhibit superhydrophobic properties with water contact angles up to 162°, enhancing droplet nucleation and departure. Growth exponent analysis (α ≈ 1/3) confirms efficient droplet departure, sustaining condensation cycles. These hierarchical structures outperform smooth and single-roughness surfaces, offering scalable, versatile solutions for condensation-driven applications, paving the way for improved energy efficiency and operational performance across various industries. Impact statement: Scientific impact.This study advances the field of surface engineering by introducing a scalable and environmentally friendly method to fabricate hierarchical superhydrophobic surfaces on metals. The results provide new insights into optimizing dropwise condensation, with water contact angles exceeding 160° and growth exponent analysis (α ≈ 1/3) confirming enhanced condensation dynamics. These findings offer a significant leap forward in designing efficient heat-transfer surfaces for various applications. Practical applications. This study advances the field of surface engineering by introducing a scalable and environmentally friendly method to fabricate hierarchical superhydrophobic surfaces on metals. The results provide new insights into optimizing dropwise condensation, with water contact angles exceeding 160° and growth exponent analysis (α ≈ 1/3) confirming enhanced condensation dynamics. These findings offer a significant leap forward in designing efficient heat-transfer surfaces for various applications. Policy relevance. The environmentally friendly fabrication process, which avoids toxic chemicals and high-energy consumption, aligns with global policy efforts toward sustainable engineering and green technology adoption. It supports industrial practices aimed at reducing carbon footprints and optimizing resource utilization. Societal benefit. This research directly addresses challenges in water and energy resource management. By improving the efficiency of condensation technologies, the study contributes to enhancing access to clean water and sustainable energy solutions, addressing global needs for resource sustainability. Graphical