Advances in research in Cultural Heritage see increasing application of a multidisciplinary approach and the combined use of physical and chemical characterization of artefacts that can be used to define their structure and their state of conservation, also providing valuable information in selecting the most suitable microclimatic conditions for the exhibition environment. This approach provides a platform for a synergic collaboration amongst researchers, restorers, conservators, and archaeologists. Existing state-of-the-art technologies for neutron-based methods are currently being applied to the study of objects of historical and cultural interest in several neutron-beam facilities around the world. Such techniques are non-invasive and non-destructive and are, therefore, ideal to provide structural information about artefacts, such as their composition, presence of alterations due to the environmental conditions, inclusions, structure of the bulk, manufacturing techniques, and elemental composition, which provide an overall fingerprint of the object’s characteristics, thanks to the nature of the interaction of neutrons with matter. Here, we present an overview of the main neutron methods for the characterization of materials of interest in Cultural Heritage and we provide a brief introduction to the sensors and detectors that are used in this framework. We conclude with some case studies underlining the impact of these applications in different archaeological and historical contexts.

Aggregation states of amyloid beta peptides for amyloid beta A $\beta$ ${}_{1–40}$ to A $\beta$ ${}_{1–42}$ and A $\beta$ p ${}_{3–42}$ are investigated through small angle neutron scattering (SANS). The knowledge of these small peptides and their aggregation state are of key importance for the comprehension of neurodegenerative diseases (e.g., Alzheimer’s disease). The SANS technique allows to study the size and fractal nature of the monomers, oligomers and fibrils of the three different peptides. Results show that all the investigated peptides have monomers with a radius of gyration of the order of 10 Å, while the oligomers and fibrils display differences in size and aggregation ability, with A $\beta$ p ${}_{3–42}$ showing larger oligomers. These properties are strictly related to the toxicity of the corresponding amyloid peptide and indeed to the development of the associated disease.

Deep Inelastic Neutron Scattering measurements of water confined in mesoporous silica have been carried out. The experiment has been performed at room temperature on dry and on hydrated samples in order to investigate the interaction between the protons and the silanol groups of the confining surface. With this aim we could control the hydration of the pores in such a way as to adsorb 3.0 water molecules per nm², corresponding to a 1 to 1 ratio with the silanol groups of the surface. DINS measurements directly measure the mean kinetic energy and the momentum distribution of the protons. A detailed analysis of the hydrated sample has been performed in order to separate the contributions of the protons in the system, allowing us to determine the arrangement of water molecules on the silanol groups. We find that the hydrogen bond of the water proton with the oxygen of the silanol group is much stronger than the hydrogen bonds of bulk water.

We investigate atmospheric neutron effects on floating-gate cells in NAND Flash memory devices. Charge loss is shown to occur, particularly at the highest program levels, causing raw bit errors in multilevel cell NAND, but to an extent that does not challenge current mandatory error correction specifications. We discuss the physical mechanisms and analyze scaling trends, which show a rapid increase in sensitivity for decreasing feature size.

Neutron scattering in combination with scanning electron and atomic force microscopy were employed to quantitatively resolve elemental composition, nano- through meso- to metallurgical structures and surface characteristics of two commercial stainless steel orthodontic archwires—G&H and Azdent. The obtained bulk composition confirmed that both samples are made of metastable austenitic stainless steel type AISI 304. The neutron technique’s higher detection sensitivity to alloying elements facilitated the quantitative determination of the composition factor (CF), and the pitting resistance equivalent number (PREN) for predicting austenite stability and pitting-corrosion resistance, respectively. Simultaneous neutron diffraction analyses revealed that both samples contained additional martensite phase due to strain-induced martensite transformation. The unexpectedly high martensite content (46.20 vol%) in G&H was caused by combination of lower austenite stability (CF = 17.37, p = .03), excessive cold working and inadequate thermal treatment during material processing. Together, those results assist in revealing alloying recipes and processing history, and relating these with corrosion resistance and mechanical properties. The present methodology has allowed access to unprecedented length-scale (μm to sub-nm) resolution, accessing nano- through meso-scopic properties. It is envisaged that such an approach can be extended to the study and design of other metallic (bio)materials used in medical sciences, dentistry and beyond.