We present systematic investigations on the physics, detection performance and inversion of logging-while-drilling extra-deep azimuthal resistivity measurements (EDARM). First, the definitions of EDRAM measurements are discussed, followed by the derivation of the attenuation and phase-shift geometrical factors to illustrate the relative contributions of formation units to the observed signals. Then, a new definition of detection depth, which considers the uncertainty of inversion results caused by the data noise, is proposed to quantify the detection capability of EDARM. Finally, the Bayesian theory associated with Markov chain Monte Carlo sampling is introduced for fast processing of EDARM data. Numerical results show that EDARM is capable of detecting the azimuth and distance of remote bed boundaries, and the detection capability increases with increasing spacing and resistivity contrast. The EDARM tool can accommodate a large range of formation resistivity and is able to provide the resistivity anisotropy at arbitrary relative dipping angles. In addition, multiple bed boundaries and reservoir images near the borehole are readily obtained by using the Bayesian inversion.
Electromagnetic logging while drilling (LWD) is one of the key technologies of the geosteering and formation evaluation for high-angle and horizontal wells. In this paper, we solve the dipole source-generated magnetic/electric fields in 2D formations efficiently by the 2.5D finite difference method. Particularly, by leveraging the field’s rapid attenuation in spectral domain, we propose truncated Gauss–Hermite quadrature, which is several tens of times faster than traditional inverse fast Fourier transform. By applying the algorithm to the LWD modeling under complex formations, e.g., folds, fault and sandstone pinch-outs, we analyze the feasibility of the dimension reduction from 2D to 1D. For the formations with smooth lateral changes, like folds, the simplified 1D model’s results agree well with the true responses, which indicate that the 1D simplification with sliding window is feasible. However, for the formation structures with drastic rock properties changes and sharp boundaries, for instance, faults and sandstone pinch-outs, the simplified 1D model will lead to large errors and, therefore, 2.5D algorithms should be applied to ensure the accuracy.
Brittleness index, usually calculated by P- and S-wave velocities, is an important parameter used to optimize the sweet spots of shale oil. Empirical relationships or artificial intelligence networks can predict sonic logs based on conventional logging data, but accuracy is limited by the formation types and properties, such as shale sandstone interbeds. Therefore, we propose a hybrid convolutional neural network long short-term memory (CNN-LSTM) deep learning model for the prediction of compressional and shear traveltimes. The new model can extract nonlinear features as well as fluctuating trends of log response features with depth, which is different from most machine learning methods that only consider extracting spatial features between logs or only time-series features of log data sets. We conclude that the new CNN-LSTM network has the highest prediction accuracy (92% and 91.3%) and advantages in predicting curve mutation points compared with other machine learning models. We apply the predicted compressional and shear sonic times for evaluating brittleness to reduce the risk of exploration in shale oil reservoirs.
A set of compact and stable formulas are developed for the computation of triaxial electromagnetic (EM) logging responses in multilayered formations with biaxial anisotropy. These formulas are based on a new global amplitude propagator matrix (GAPM) algorithm, which derives the amplitudes of upgoing/downgoing waves at the boundaries rather than the reflection/transmission coefficients of each layer. The kernel of the GAPM algorithm is assembling the local continuity equations into a global linear system, which has addressed the notorious overflow problems commonly encountered by the traditional coefficient propagator matrix approach. To fast and accurately convert the EM fields from the spectral domain into the spatial domain, an efficient twofold inverse Fourier transform (IFT) technique is established for the computation of triaxial EM logging responses. Two main techniques are developed to significantly improve the computation accuracy and speed of IFT. On the one hand, the spectral fields at the first integral quadrant can be used to express the fields at the other three quadrants. Consequently, the original twofold infinite integral is analytically simplified to a semiinfinite one and the computation cost can be reduced by three-fourths. On the other hand, a two-level subtraction scheme is developed to reduce the integral singularity. The first-level subtraction is achieved by separating the primary fields from the total fields. The second-level process includes subtracting the spectral scattered fields of an equivalent transverse isotropic (TI) layered medium, integrating the residual fields, and computing the spatial fields of the TI model. The subtractions on the primary and scattered fields can make the integral convergence increase by more than 10 orders of magnitude in favorable conditions. Numerical experiments demonstrate that the new semianalytical formulas are well suited for any dipping angle and an arbitrary number of layers, as well as for thin and thick formations. The modeling method is efficient and robust, which can provide a fast simulator for the interpretation of triaxial EM logging data.
The high-resolution azimuthal resistivity laterolog response in a fractured formation was numerically simulated using a three-dimensional finite element method. Simulation results show that the azimuthal resistivity is determined by fracture dipping as well as dipping direction, while the amplitude differences between deep and shallow laterolog resistivities are mainly controlled by the former. A linear relationship exists between the corrected apparent conductivities and fracture aperture. With the same fracture aperture, the deep and shallow laterolog resistivities present small values with negative separations for low-angle fractures, while azimuthal resistivities have large variations with positive separations for high-angle fractures that intersect the borehole. For dipping fractures, the variation of the azimuthal resistivity becomes larger when the fracture aperture increases. In addition, for high-angle fractures far from the borehole, a negative separation between the deep and shallow resistivities exists when fracture aperture is large as well as high resistivity contrast exists between bedrock and fracture fluid. The decreasing amplitude of dual laterolog resistivity can indicate the aperture of low-angle fractures, and the variation of the deep azimuthal resistivity can give information of the aperture of high-angle fractures and their position relative to the borehole.