Li Zhi-qiang

Dr. Li Zhi-qiang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2022 in Geophysics
Verified
Journal Article
Closed access
LWLei Wang
Lei Wang
PQPing Qiao
Ping Qiao
LZLi Zhi-qiang
Li Zhi-qiang
PZPan Zhang
Pan Zhang
SDShaogui Deng
Shaogui Deng
YFYiren Fan
Yiren Fan
A set of compact and stable formulas are developed for the computation of triaxial electromagnetic (EM) logging responses in multilayered formations with biaxial anisotropy. These formulas are based on a new global amplitude propagator matrix (GAPM) algorithm, which derives the amplitudes of upgoing/downgoing waves at the boundaries rather than the reflection/transmission coefficients of each layer. The kernel of the GAPM algorithm is assembling the local continuity equations into a global linear system, which has addressed the notorious overflow problems commonly encountered by the traditional coefficient propagator matrix approach. To fast and accurately convert the EM fields from the spectral domain into the spatial domain, an efficient twofold inverse Fourier transform (IFT) technique is established for the computation of triaxial EM logging responses. Two main techniques are developed to significantly improve the computation accuracy and speed of IFT. On the one hand, the spectral fields at the first integral quadrant can be used to express the fields at the other three quadrants. Consequently, the original twofold infinite integral is analytically simplified to a semiinfinite one and the computation cost can be reduced by three-fourths. On the other hand, a two-level subtraction scheme is developed to reduce the integral singularity. The first-level subtraction is achieved by separating the primary fields from the total fields. The second-level process includes subtracting the spectral scattered fields of an equivalent transverse isotropic (TI) layered medium, integrating the residual fields, and computing the spatial fields of the TI model. The subtractions on the primary and scattered fields can make the integral convergence increase by more than 10 orders of magnitude in favorable conditions. Numerical experiments demonstrate that the new semianalytical formulas are well suited for any dipping angle and an arbitrary number of layers, as well as for thin and thick formations. The modeling method is efficient and robust, which can provide a fast simulator for the interpretation of triaxial EM logging data.

19 December 2024 in Geophysics
Verified
Journal Article
Closed access
LWLei Wang
Lei Wang
YHYueyang Han
Yueyang Han
LZLi Zhi-qiang
Li Zhi-qiang
DHDonghan Hao
Donghan Hao
SDShaogui Deng
Shaogui Deng
Numerical geometrical factors (GFs) are developed for array laterolog measurements in 1D cylindrically and planarly layered formations. The kernel of GFs assumes that laterolog responses can be expressed in terms of the linear superposition of formation resistivities at different units. Two techniques, namely physics-driven modeling and data-driven approximation, have been used to ensure the computational accuracy and efficiency of GFs. Physics-driven modeling uses a 3D finite-element algorithm to generate high-precision and fully labeled GF data and library. Subsequently, these predetermined data are trained offline using classical neural network algorithms to establish an implicit relationship between the formation parameters and GFs. The joint physics and data-driven GFs present three main advantages. First, they enable the direct representation of the spatial sensitivity of layered formations laterally and horizontally in vertical and horizontal wells. Second, GFs can be used to calculate the array laterolog responses rapidly. The computation speed can be enhanced thousands of times in comparison with traditional physic-driven modeling, allowing for real-time data processing. Another noteworthy aspect is that GF forward modeling can handle formations with arbitrary layers, thereby resolving the fixed-layer modeling issue inherent in traditional data-driven methods. Third, the GFs can be used to approximate the derivative of the logging response with respect to formation resistivity, significantly reducing the complexity of the Jacobian matrix calculation for deterministic inversion. These numerical GFs not only serve as an excellent alternative simulator for the array laterolog but will also be helpful to accelerate the modeling and inversion of other logging measurements in layered structures.

20 February 2023 in Frontiers in Earth Science
Verified
Journal Article
Open access
JXJigen Xia
Jigen Xia
LZLi Zhi-qiang
Li Zhi-qiang
YJYongli Ji
Yongli Ji
HZHengrong Zhang
Hengrong Zhang
FLFangong Li
Fangong Li
XDXingmeng Dong
Xingmeng Dong
The unknown nature and complexity of non-uniform formations cause new difficulties and challenges to the accurate detection of electrical instruments in shallow formations. The micro-cylindrically focused logging tool (MCFL) can provide three original measurement curves, RB0, RB1, and RB2, with different detection depths, which reflect the flushing zone resistivity, mudcake resistivity, and mudcake thickness. In this study, the finite element method was used to model and analyze the micro-cylindrically focused logging tool tool in a three-dimensional non-uniform medium model. By converting the partial differential equation into a generalized polar problem, the logging response characteristics of the micro-cylindrically focused logging tool tool at different detection depths and ranges, mudcake thicknesses, flush zones, and mudcake resistivity contrasts were investigated. Inverse processing of the micro-cylindrically focused logging tool data using the least-squares method was used to obtain the flush zone resistivity, mudcake resistivity, and mudcake thickness, based on which the micropotential and microgradient curves were synthesized. In addition, a digital focusing method was proposed to improve the focusing accuracy and flexibility of the instrument, enhancing the performance of the micro-cylindrically focused logging tool. The optimized design of the focusing method significantly improved the detection performance of the pole plate. This plays an important role in the evaluation of thin layers and oil-water reservoirs.

10 November 2022 in Interpretation
Verified
Journal Article
Closed access
DZDefu Zang
Defu Zang
YJYongli Ji
Yongli Ji
YCYongsheng Chao
Yongsheng Chao
LZLi Zhi-qiang
Li Zhi-qiang
The principle of crosswell electromagnetic (EM) imaging is similar to that of induction logging. The difference between them is that conventional induction logging can only measure the formation conductivity within a few meters around the well. However, crosswell EM imaging can be used in two wells with a separation distance of up to 1000 m. Several novel signal processing methods for crosswell EM imaging systems are developed for calibration, casing correction, and hybrid Jacobian matrix calculation. To conveniently perform calibration on the ground, the EM field formula in a vertical layered media is derived based on Maxwell equations, and the relationships between the received signal and frequency, formation conductivity, and transceiver spacing are subsequently derived. Furthermore, a new calibration method is developed. The EM field formula for a radial layered media is derived, and the analytical expressions describing the relationship between the receiving signal and borehole parameters, metal casing parameters, formation parameters, and receiver location are obtained. The effects of mud resistivity, metal casing position, metal casing resistivity, permeability, cement ring resistivity, transmitting frequency, and receiver location on the crosswell EM receiving signal are simulated. It is determined that only the casing required a correction. The influence of the metal casing is corrected by establishing a database. The difference between the corrected data and data obtained without a metal casing is less than 1%. There is a large error in the calculation of the Jacobian matrix in some regions when Green’s function was used. A hybrid Jacobian matrix calculation method combining local perturbation and a global Green’s function is developed, which significantly reduced the error and improved the inversion accuracy.

9 October 2022 in Sensors
Verified
Journal Article
Open access
PDF file
LCLi Chen
Li Chen
DGDeng shao Gui
Deng shao Gui
LZLi Zhi-qiang
Li Zhi-qiang
JWJian Wu
Jian Wu
BLBaoyin Lu
Baoyin Lu
JYJutao Yang
Jutao Yang
Because the dielectric constant of water is greater than that of oil and gas, dielectric logging sensors can effectively distinguish oil and gas reservoirs from water layers by measuring the dielectric parameters of formations. Under the special working conditions during the logging of boreholes drilled for oil and gas exploration, such as high temperature and pressure and a narrow working space, the endurance and effectiveness of the antenna in the dielectric logging sensor are crucial. This paper presents a design method for a dual-polarization slot antenna for such working conditions. We theoretically analyzed the working principle of this antenna, established the antenna model, and evaluated its radiation characteristics through simulation. Subsequently, we developed and tested the proposed antenna. The antenna could withstand a high temperature and pressure of 175 °C and 140 MPa, respectively. A dielectric logging sensor using the proposed antenna was successfully applied in oilfield logging.

7 January 2024 in Geophysics
Verified
Journal Article
Closed access
YCYongsheng Chao
Yongsheng Chao
YJYongli Ji
Yongli Ji
DZDefu Zang
Defu Zang
LZLi Zhi-qiang
Li Zhi-qiang
HWHuaxiong Wang
Huaxiong Wang
YRYanmin Ren
Yanmin Ren
Crosswell electromagnetic (EM) logging has useful applications in oil, gas, and water monitoring as well as carbon sequestration estimation. Difficulties in the efficient propagation of EM waves through a steel casing inhibit crosswell EM logging at distances greater than 300 m. This study investigates whether high-power transmission and high-efficiency transmitting antennas can resolve the challenges of long-distance crosswell EM logging through steel casings. Theoretical analysis indicates that the emission moment should be at least 12,000 A·m2. By calculating the equivalent relative permeability and selecting the appropriate coil materials and magnetic cores, the maximum emission magnetic moment can create a high-power transmission. Based on series and parallel resonant circuits and the alternating current/direct current cable core multiplexing power supply method, the effective transmission bandwidth is broadened and the transmission efficiency increases by three times. The emission unit is fabricated and tested using single, double, and fiberglass casing. We observe that the crosswell EM technology performs better for nonmetal casing wells than that for metal casing wells. The amplitude and phase curves between two fiberglass casing wells in the range of 425 m are quite smooth. However, the receiving signals in the double-layer steel casing decrease to only a few tenths of the value in the fiberglass casing wells, highlighting the difficulty of long-distance EM wave transmission when using steel casings. Thus, studies on EM transmission through four or more layers of steel casings should be conducted in the future.