The need to reach carbon neutrality as soon as possible has made the use of recycled materials widespread. However, the treatment of artificial marble waste powder (AMWP) containing unsaturated polyester is a very challenging task. This task can be accomplished by converting AMWP into new plastic composites. Such conversion is a cost-effective and eco-friendly way to recycle industrial waste. However, the lack of mechanical strength in composites and the low filling content of AMWP have been major obstacles to its practical application in structural and technical buildings. In this study, a composite of AMWP/linear low-density polyethylene (LLDPE) filled with a 70 wt% AMWP content was fabricated using maleic anhydride-grafted polyethylene as a compatibilizer (MAPE). The mechanical strength of the prepared composites is excellent (tensile strength ~18.45 MPa, impact strength ~51.6 kJ/m²), making them appropriate as useful building materials. Additionally, laser particle size analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and thermogravimetric analysis were used to examine the effects of maleic anhydride-grafted polyethylene on the mechanical properties of AMWP/LLDPE composites and its mechanism of action. Overall, this study offers a practical method for the low-cost recycling of industrial waste into high-performance composites.

Developing flame-retarded styrene-acrylic emulsion (SAE) based damping composites is a challenging task because of their very high flammability. A promising approach is the synergistic combination of expandable graphite (EG) and ammonium polyphosphate (APP). In this study, the surface modification of APP was modified by commercial titanate coupling agent ndz-201 through ball milling, and the SAE-based composite material was prepared with SAE and different ratios of modified ammonium polyphosphate (MAPP) and EG. The surface of MAPP was successfully chemically modified by NDZ-201 through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Energy Dispersion Spectroscopy (EDS), and contact angle. The effects of different ratios of MAPP and EG on the dynamic and static mechanical properties and flame retardancy of composite materials were explored. The results showed that when MAPP:EG = 1:4, the limiting oxygen index (LOI) of the composite material was 52.5%, and the vertical burning test (UL-94) was at the V0 level. Its LOI increased by 141.9% compared to the composite materials without flame retardant. The optimized formulation of MAPP and EG in SAE-based damping composite materials showed a significant synergistic effect on the flame retardancy of the composite material.

Developing photoelectrochemical biosensors via efficient photogenerated-charge separation remains a challenging task in biomolecular detection. In this study, we utilised a simple approach for constructing an efficient photoactive organic–inorganic heterojunction interface composed of SrTiO₃ with high photocatalytic activity and polydopamine (PDA) with high biocompatibility and electrical conductivity. Gold nanoparticles with dense electron cloud properties were introduced as a bridge between SrTiO₃ and PDA (SrTiO₃/Au/PDA). The Au bridge allowed the PDA to uniformly and tightly attach on the surface of SrTiO₃ electrodes and also provided a separate transmission channel for electrons from PDA to SrTiO₃. The rapidly transmitted electrons were captured by a signal-acquisition system, thereby improving the photocurrent signal output. The 3D hollowed out SrTiO₃/Au/PDA biosensor manufactured herein was used for glucose detection. The biosensor achieved ultrahigh sensitivities reaching 23.7 μA mM⁻¹ cm⁻², an extended linear range (1–20 mM), and a low detection limit (0.012 mM). The excellent results of glucose analysis in serum samples further confirmed the feasibility of the biosensor in clinical applications. In summary, the proposed strategy allowed for the use of an electronic cloud bridge in the construction of glucose biosensors with satisfactory performances, which is promising for the future fabrication of high-performance biosensors.

The enhancement of the utilization rate of solid waste, along with balancing the comprehensive performance of materials, presents a significant challenge in the development of new functional building materials. This study examined the effects of high concentrations of iron tailing powder on the crystallization characteristics, pore structure, compressive strength, and water absorption of modified magnesium oxysulfate (MOS) foam cement with different dry densities. Furthermore, employing chemical foaming technology, the study characterized and analyzed the microstructure of modified MOS foam cement hydration products through scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The results indicated that the addition of an acidic modifier effectively facilitated the hydration reaction in the MgO-MgSO₄-H₂O system, enhancing the micro-crystallization characteristics of MOS foam cement. The internal pores were uniformly round, with a dense crystal structure within the pore walls. The compressive strength of the material with 40% dry density A08 grade iron tailing powder reached 6.83 MPa, and the lowest water absorption was 5.32% at a dry density of A09.